6
If you select Motorized System to On, select
your desired source.
Option
Drive
Select the direction in which you want to
Direction
move the motor.
Drive Mode Two modes are available: Step and Con-
tinuous.
Step: The motor moves based on the
y
value you enter (from 1 to 128).
Continuous: The motor moves con-
y
tinuously until you press the "Stop".
Test TP
Select the test TP you want to tune.
Set Limit
Set the motor movement to east or west
to have the motor move only within the
direction set.
On: You can limit the movement to
y
the current direction by selecting the
"West/East".
Off: You can cancel the limit you set.
y
Go To Zero You can move the motor to "Zero".
Store
You can save the motor's current direction.
7
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
If you set Satellite to Others when adding a
y
setting ID, you must add a transponder using
Manual Tuning.
You can add up to 16 setting IDs.
y
All setting IDs can be deleted, except for
y
Setting ID 1.
When selecting 22KHz Tone and DiSEqc, or
y
Tone Burst and DiSEqc, you must connect
them in the same position as displayed on
the OSD.
If you delete a setting ID, all programmes
y
stored in the setting ID are deleted.
Description
Tivu Programme List Update
(In Satellite, Antenna & Satellite, Cable & Satellite
mode only-Only Satellite models)(Only Italy)
1
Press Home to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
SETUP and press OK.
4
Press the Navigation buttons to scroll to Tivu
Programme List Update and press OK.
5
Press the Navigation buttons to scroll to
Off or On.
NOTE
It updates the changed Programme List in-
y
formation by based on country broadcasting
circumstance and satellite.
It updates the Programme List when the TV
y
turn off all the time. After updates, the Pro-
gramme List may be changed. If not want,
select Off.
35
WATCHING TV