Page 1
6010 K Glaskeramik-Kochfeld Ceramic glass hob Table de cuisson vitrocéramique Montage- und Gebrauchsanweisung Installation and Operating Instructions Instructions de montage et mode d’emploi...
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appli- ance. The following symbols are used in the text: Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance.
Operating Instructions 1 Safety instructions Please comply with these instructions. If you do not, any damage re- sulting is not covered by the warranty. This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC –...
Safety during use • Remove stickers and film from the glass ceramic. • There is the risk of burns from the appliance if used carelessly. • Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. •...
Description of the Appliance Cooking surface layout Single cooking zone Single cooking zone 1200W 1800W Hob Cooking Zone Control Knobs Double ring cooking zone Residual heat Single cooking zone 750/2200W indicator 1200W Assignment of control knobs...
Control Knobs The cooking power can be set anywhere between level 1 and 9. lowest power highest power Off position Connection double ring cooking zone Residual heat indicator The residual heat indicator lights up, as soon as the corresponding cooking zone is hot. Danger! Risk of burns from residual heat.
Setting the heat setting Heat setting Ring control knob Knob setting turn clockwise To increase 1 - 9 turn anti-clock- To reduce 9 - 1 wise switch off 1. When boiling water/searing food, select a high heat setting. 2. As soon as steam forms or the fat or oil is hot, set a lower heat setting. 3.
Tips on Cooking and Frying Information on acrylamides According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitute a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much. Cookware •...
Examples of cooking applications The information given in the following table is for guidance only. Heat Cooking- Cooking set- suitable for Tips/Hints process time ting Residual heat, Off posi- tion Keeping Keeping cooked foods food as required Cover warm warm Hollandaise sauce, Melting melting butter, chocolate,...
Cleaning and Care Take care! Risk of burns from residual heat. Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. Warning! Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1.
What to do if … Problem Possible cause Remedy The cooking zones are not The desired heat setting is Set the heat setting. functioning. not set. The fuse in the house’s Check the fuse. electrical wiring (fuse box) If the fuses trip a number has been tripped.
Disposal Packaging material The packaging materials are environmentally friendly and can be recy- cled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance The symbol on the product or on its packaging indicates that this...
Page 14
WARNING! Risk of injury from electrical current. • The electrical mains terminal is live. • Make electrical mains terminal free of voltage. • Observe connection schematic. • Observe electrical safety rules. • Ensure anti-shock protection through correct installation by a quali- fied electrician.
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instruc- tions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.