hit counter script
Toshiba Tecra M2 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. TECRA M2
  6. User manual
Toshiba Tecra M2 User Manual

Toshiba Tecra M2 User Manual

Portable personal computer
Hide thumbs Also See for Tecra M2:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
TECRA M2
TOSHIBA
TECRA M2
Portable Personal Computer
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Tecra M2

Summary of Contents for Toshiba Tecra M2

  • Page 1 TECRA M2 TOSHIBA TECRA M2 Portable Personal Computer User’s Manual...
  • Page 2 This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA TECRA M2 Portable Personal Computer at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice.

  • Page 3: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, USB port, parallel port,...
  • Page 4 TOSHIBA America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618-1697 Telephone: (949) 583-3000 EU Declaration of Conformity TOSHIBA declares, that the product: PTM20* conforms to the following Standards: Supplementary “The product complies with the requirements of Information: the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and/or the R&TTE...
  • Page 5 User’s Manual Network Compatibility Statement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to conform with the additional requirements conditional in EG 201 121. Germany ATAAB AN005,AN006,AN007,AN009,AN010 and DE03,04,05,08,09,12,14,17 Greece ATAAB AN005,AN006 and GR01,02,03,04...

  • Page 6: Type Of Service

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.

  • Page 7: Fax Branding

    User’s Manual Fax branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity or individual sending the message and the telephone...
  • Page 8 User’s Manual The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
  • Page 9 User’s Manual Notes for use of this device in New Zealand The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of operating depend on a specific network implementation which is only one of many ways of delivering high quality voice telephony to customers.
  • Page 10 User’s Manual When used in the Auto Answer mode, the S0 register must be set with a value of 3 or 4. This ensures: a person calling your modem will hear a short burst of ringing before the modem answers. This confirms that the call has been successfully switched through the network.
  • Page 11 User’s Manual The Telepermit label may also be shown on the packaging of the product and in the sales literature, as required in PTC 100. The charge for a Telepermit assessment is $337.50. An additional charge of $337.50 is payable where an assessment is based on reports against non-Telecom New Zealand Specifications.
  • Page 12 User’s Manual User’s Manual...

  • Page 13: Table Of Contents

    TECRA M2 Table of Contents Preface Manual contents ......... . xxi Conventions.
  • Page 14 Chapter 4 Operating Basics TOSHIBA Dual Pointing Device ......4-1 Using the Touch Pad ........4-2 Using the AccuPoint .
  • Page 15 Table of Contents Using optical media drives........4-6 Loading discs.
  • Page 16 Installing the battery pack ....... . 6-14 TOSHIBA Password Utility ....... . . 6-15 User password .
  • Page 17 TV ........... . . 8-16 Using the TOSHIBA Console button ......8-16 Changing the resolution.
  • Page 18 TOSHIBA support ........
  • Page 19 Table of Contents Appendix A Specifications Appendix B Display Controller and Modes Appendix C AT Commands Appendix D S-registers Appendix E V.90 Appendix F Internal Modem Guide Appendix G Wireless LAN Appendix H AC Power Cord and Connectors Appendix I Parts Numbers Glossary Index User’s Manual...
  • Page 20 Table of Contents User’s Manual...

  • Page 21: Manual Contents

    This manual tells how to set up and begin using your TECRA M2 computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

  • Page 22: Conventions

    Chapter 4, Operating Basics, includes instructions on using the following devices: TOSHIBA Dual Pointing Device, USB floppy disk drive, Slim Select Bay modules, optical media drives, microphone, modem, Wireless communication features, LAN. It also provides tips on care of the computer, floppy disks and CD/DVDs.

  • Page 23: Key Operation

    Preface Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C.
  • Page 24 Preface xxiv User’s Manual...

  • Page 25: General Precautions

    TECRA M2 General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 26: Pc Card Overheating

    For optimum performance, use your computer product only under recommended conditions Read additional restrictions under “Environmental Conditions” in your product Resource Guide. Contact TOSHIBA Service and Support for more information. xxvi...

  • Page 27: Chapter 1 Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.

  • Page 28: Software

    End User License Agreement Product Recovery DVD-ROM Features The computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits: User’s Manual...
  • Page 29 Introduction Processor Built-in The computer is equipped with an Intel® processor, which incorporates a math co- processor, a 64 KB level 1 cache memory and a 1MB level 2 cache memory. It also supports Enhanced Intel® SpeedStep™ technology. Intel® Pentium® M processor 1.4 GHz Intel®...
  • Page 30 Introduction Disks Hard disk drive Available in four sizes. •30.0 billion bytes (27.94 GB) •40.0 billion bytes (37.26 GB) •60.0 billion bytes (55.88 GB) •80.0 billion bytes (74.52 GB) USB floppy disk Accommodates either 3 1/2" 1.44-megabyte or drive (Optional) 720-kilobyte floppy disks.
  • Page 31 Introduction CD-RW/DVD-ROM Some models are equipped with a full-size, CD- drive RW/DVD-ROM drive module that lets you run CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed. It writes CD-R at up to 24 speed and CD-RW at up to 24 speed.
  • Page 32 Introduction DVD±R/±RW drive Some models are equipped with a full- size (DVD Dual drive) DVD±R/±RW drive module that lets you record data to rewritable CD/DVDs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.
  • Page 33 Introduction TOSHIBA Dual Pointing Device Built-in Touch Pad A Touch Pad and control buttons in the palm rest enable control of the on-screen pointer and scrolling of windows. Built-in AccuPoint This pointer control stick, located in the center of the keyboard, provides convenient control of the cursor.
  • Page 34 Introduction Multimedia Sound system Windows sound system compatible sound system provides internal speakers and microphone as well as jacks for an external microphone and headphone. Video-out jack The video out jack lets you transfer video data to external devices. Data output depends on the (S-Video) type of device connected to the S-Video cable.
  • Page 35 DVD-ROM drive, CD-RW/ Modules DVD-ROM drive, DVD Multi drive, DVD±R/±RW drive, secondary hard disk drive or secondary battery pack. The TOSHIBA Mobile Extension enables hot insertion of modules when you are using a plug and play operating system. Slim Select Bay To reduce weight, the Slim Select Bay module can be removed and a weight saver installed.

  • Page 36: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. TOSHIBA Console Press this button to launch an application automatically.
  • Page 37 Power is restored when the hard disk is accessed. You can specify the time in the HDD power off item of the Basic Setup tab in TOSHIBA Power Saver. System automatic...
  • Page 38 If the computer’s internal temperature rises to a certain level, the cooling fan is turned on or the processing speed is lowered. Use the Fan item of the Basic Setup tab in TOSHIBA Power Saver. Maximum Turns on fan first, Performance...

  • Page 39: Utilities

    “shortcut” keys to quickly launch applications and speed your work in Windows. To start the utility, click the Windows Start button, point to All Programs, point to TOSHIBA, point to Utilities and click Fn-esse. DVD Video Player The DVD Video Player is used to play DVD- Video.
  • Page 40 Select Bay modules while the computer is on. To activate this utility, select TOSHIBA Mobile Extension from TOSHIBA Console. TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication device and network connections. ConfigFree also allows you to find...

  • Page 41: Options

    (PC2100 / PC2700 DDR) can easily be installed in the computer. Battery pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare or replacement. High-Capacity An additional battery pack can be purchased Battery pack from your TOSHIBA dealer.
  • Page 42 Introduction Security lock A slot is available to attach a security cable to the computer to deter theft. USB floppy disk Kit A 3 1/2" floppy disk drive accommodates 1.44- megabyte or 720-kilobyte floppy disk. It connects to a USB port. (You cannot format 720-kilobyte floppy disks on Windows XP, but you can use previously formatted disks.) Advanced Port...

  • Page 43: Slim Select Bay Options

    Introduction Slim Select Bay options The following modules can be installed in the Slim Select Bay. All other modules are options. DVD-ROM Refer to the Features section for details. CD-RW/DVD-ROM Refer to the Features section for details. DVD Multi Refer to the Features section for details. DVD±R/±RW Refer to the Features section for details.
  • Page 44 Introduction 1-18 User’s Manual...

  • Page 45: Chapter 2 The Grand Tour

    TECRA M2 Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed Figure 2-1 shows the computer’s front with its display panel in the closed position.

  • Page 46: Left Side

    The Grand Tour Wireless Slide this switch to the left to turn off Wireless LAN and Bluetooth functions. Slide it to the right communication to turn on the functions (Some models are not switch equipped wireless LAN). Left side Figure 2-2 shows the computer’s left side. Cooling vents i.LINK(IEEE1394)port Parallel port...

  • Page 47: Right Side

    The Grand Tour PC card slot A PC card slot can accommodate two 5 mm Type II cards or one Type III card. The slot supports 16-bit PC cards and CardBus PC cards. Keep foreign objects out of the PC card slot. A pin or similar object can damage the computer’s circuitry.

  • Page 48: Backside

    The Grand Tour External monitor This 15-pin port lets you connect an external video display. port Universal Two Universal Serial Bus ports are on the left side. The ports comply with the USB 2.0 Serial Bus standard, which enables data transfer speeds 40 (USB 2.0) ports times faster than the USB 1.1 standard (The ports also support USB 1.1.).
  • Page 49 The Grand Tour DC IN 15V The AC adaptor connects to this socket. Use only the model of AC adaptor that comes with the DC IN 15V computer. Using the wrong adaptor can damage your computer. LAN jack This jack lets you connect to a LAN. The adaptor Ether has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet...

  • Page 50: Underside

    The Grand Tour Underside Figure 2-5 shows the underside of the computer. Make sure the display is closed before turning over your computer. Notches Battery pack Battery lock Battery release latch Slim Select Bay lock Docking Interface Slim Select Bay Memory lock screw module cover...
  • Page 51 The Grand Tour Keep foreign objects out of the docking interface port. A pin or similar object can damage the computer's circuitry. A plastic shutter protects the connector. Memory module This cover protects one memory module sockets cover one or no module is preinstalled. Another memory module is under the keyboard.

  • Page 52: Front With The Display Open

    Stereo speaker (Right) Power button TOSHIBA Touch Pad Console Button control buttons TOSHIBA Presentation AccuPoint Touch Pad Button AccuPoint Control Buttons Figure 2-6 The front of the Touch Pad model with the display open Figure 2-6 shows the front of the computer with the display open. To open the display, push the display latch on the front of the display and lift up.
  • Page 53 PC changes its display mode to the multi-monitor display on LCD and CRT. You can also return to single display by pressing this button twice. The setting of TOSHIBA Presentation button can be changed through the property of TOSHIBA Console. Display mode is changed to the multi- monitor display by selecting "Different Image"...

  • Page 54: System Indicators

    Hibernation mode. Use the TOSHIBA Power Saver Utility to enable or disable this feature. The default is “enabled”. Refer to the TOSHIBA Power Saver Utility and Panel Power Off/On items in Chapter 1, Introduction, for details on settings.
  • Page 55 The Grand Tour Power The Power indicator glows in green when the computer is on. If you select Standby from Shut Down Windows, this indicator flashes orange (one second on, two seconds off) while the computer shuts down. Battery The Battery indicator shows the condition of the battery’s charge: Green indicates full charge, orange indicates battery charging and flashing orange indicates a low battery charge.

  • Page 56: Keyboard Indicators

    The Grand Tour Keyboard indicators The figures below show the positions of the keypad overlay indicators and the Caps Lock indicator. When the F10 key indicator glows the keypad overlay lets you control the cursor. When the F11 key indicator glows the keypad overlay lets you enter numbers.

  • Page 57: Usb Floppy Disk Drive

    The Grand Tour USB floppy disk drive A 3 1/2" floppy disk drive accommodates 1.44-megabyte or 720-kilobyte floppy disks. It connects to the USB port. Disk-In-Use Indicator Floppy disk Eject button slot Figure 2-10 USB floppy disk drive Disk-In-Use This indicator lights when the floppy disk is being accessed.

  • Page 58: Optical Media Drives

    The Grand Tour Optical media drives One of the following optical media drives is installed in the computer: DVD- ROM, CD-RW/DVD-ROM, DVD Multi and DVD±R/±RW drives. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows. Region codes for DVD drives and media DVD-ROM, CD-RW/DVD-ROM, CD/DVD Multi, DVD±R/±RW drives and media are manufactured according to the specifications of six marketing...

  • Page 59: Dvds

    The Grand Tour DVDs DVD-R discs can be written only once. The recorded data cannot be erased orchanged. DVD-RW discs can be recorded more than once. DVD-RAM discs can be recorded more than once. Formats The drives support the following formats: DVD-ROM DVD -Video CD-DA...

  • Page 60: Dvd Multi Drive

    The Grand Tour DVD Multi drive The full-size DVD Multi drive module lets you record data to rewritable CD/ DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.

  • Page 61: Ac Adaptor

    Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. Use only the AC adaptor supplied as an accessory. Other AC adaptors have different voltage and terminal polarities and use of them may produce heat and smoke or even result in fire or rupture.
  • Page 62 The Grand Tour 2-18 User’s Manual...

  • Page 63: Chapter 3 Getting Started

    TECRA M2 Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Setting up your work space — for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.

  • Page 64: General Conditions

    Getting Started General conditions In general, if you are comfortable, so is your computer, but read the following to make sure your work site provides a proper environment. Make sure there is adequate space around the computer for proper ventilation. Make sure the AC power cord connects to an outlet that is close to the computer and easily accessible.

  • Page 65: Seating And Posture

    Getting Started Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Refer to the following tips and to figure 3-1. Below eye level 90°angles...

  • Page 66: Work Habits

    Getting Started Work habits A key to avoiding discomfort or injury from repetitive strain is to vary your activities. If possible, schedule a variety of tasks into your workday. If you must spend long periods at the computer, finding ways to break up the routine can reduce stress and improve your efficiency.

  • Page 67: Opening The Display

    Use only the AC adaptor supplied with your computer or an equivalent adaptor that is compatible. Use of any incompatible adaptor could damage your computer. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor. When you connect the AC adaptor to the computer, always follow the steps in the exact order as described in the User’s Manual.

  • Page 68: Turning On The Power

    Getting Started Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. Display latch Figure 3-4 Opening the display Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system.

  • Page 69: Windows Xp Setup

    Getting Started Windows XP setup When you first turn on the power, the computer’s initial screen is the Microsoft Windows XP Professional Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode.

  • Page 70: Starting Hibernation

    For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places : the Hibernate tab in Power Options and Setup Action tab in TOSHIBA Power Saver. Otherwise, the computer will shut down in Standby mode. If battery power becomes depleted, data saved in Standby mode will be lost.

  • Page 71: Standby Mode

    When the AC adaptor is connected, the computer will go into Standby mode according to the settings in the TOSHIBA Power Saver utility. To restore operation from Standby mode, press the power button or press any key. The latter action works only if Wake-up on Keyboard is enabled in HW Setup.

  • Page 72: Restarting The Computer

    1. Click Start, click Turn Off Computer and click Stand by. 2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel. Open Performance and Maintenance and open TOSHIBA Power Saver.

  • Page 73: Restoring The Preinstalled Software From The Product Recovery Dvd-Rom

    2. Hold down the F12 key and turn on the power. When In Touch with Tomorrow TOSHIBA appears, release the F12 key. 3. Use the left or right cursor key to select the DVD-ROM icon in the display menu.
  • Page 74 Getting Started 3-12 User’s Manual...

  • Page 75: Chapter 4 Operating Basics

    Operating Basics This chapter gives information on basic operations including using the TOSHIBA Dual Pointing Devices, USB floppy disk drive, the microphone, the internal modem, wireless communication, LAN, and changing Slim Select Bay modules. It also provides tips on caring for your computer, floppy disks and CD/DVDs.

  • Page 76: Using The Touch Pad

    Operating Basics Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go. Two buttons below the Touch Pad are used like the buttons on a mouse pointer.

  • Page 77: Using The Usb Floppy Disk Drive

    Operating Basics To remove the AccuPoint cap, firmly pinch the cap and pull it straight up. Figure 4-2 Removing the AccuPoint cap Position a new cap on the peg and press it into place. The peg is square, so be careful to align the cap’s square hole with the peg.

  • Page 78: Disconnecting 3 1/2" Floppy Disk Drive

    To avoid injury, do not put your hand into the Slim Select Bay slot. Before removing or inserting a second battery pack, turn off the computer’s power. The TOSHIBA Mobile Extension is preinstalled to support hot swapping under Windows. Refer to Chapter 1, Introduction for information on using this utility to change modules while the computer’s power is on.

  • Page 79: Inserting A Module

    Operating Basics 6. Grasp the DVD-ROM drive and slide it out. The DVD-ROM drive and other Slim Select Bay modules can become hot with use. Be careful when removing the module. Lock Screw Silm Select Bay Latch Silm Select Bay Module Figure 4-4 Removing the Slim Select Bay HDD adaptor Inserting a module...

  • Page 80: Using Optical Media Drives

    Operating Basics Using optical media drives The text and illustrations in this section refer primarily to the optional DVD- ROM drive. However, operation is the same for other optical drive in the Slim Select Bay. The full-size drive provides high-performance execution of CD/DVD-ROM-based programs.
  • Page 81 Operating Basics b. Pressing the eject button will not open the drawer when the DVD- ROM drive’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.

  • Page 82: Removing Discs

    Operating Basics When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the tray. After seating the CD/DVD, however, make sure it lies flat, as shown in figure 4-9.

  • Page 83: Writing Cds On Cd-Rw/Dvd-Rom Drive

    Operating Basics 2. The CD/DVD extends slightly over the sides of the drawer so you can hold it. Hold the CD/DVD gently and lift it out. Figure 4-11 Removing a CD/DVD 3. Push the center of the drawer to close it. Press gently until it locks into place.

  • Page 84: When Writing Or Rewriting

    Operating Basics TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.

  • Page 85: Writing Cd/Dvds On Dvd Multi Drive

    DVD±R/±RW drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer (DVD Multi drive) TOSHIBA does not bear responsibility for the following: Damage to any CD-R/-RW or DVD-R/-RW/-RAM disc that may be caused by writing or rewriting with this product.

  • Page 86: Disclaimer (Dvd±R/±Rw Drive)

    Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 87 Operating Basics If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it. The actual number of rewrites to CD-RW, DVD-RW or DVD+RW is affected by the quality of the disc and the way it is used.

  • Page 88: When Writing Or Rewriting

    Operating Basics Write from the computer's HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. Writing with software other than Drag'n Drop CD+DVD is not recommended. When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/ -RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.

  • Page 89: Data Verification

    Operating Basics You cannot back up DVD-ROM, DVD-Video or DVD-R/-RW or DVD+R/ +RW to CD-R/RW using the DISC Backup function of Drag'n Drop CD+DVD. Drag'n Drop CD+DVD cannot record in packet format. You might not be able to use the DISC backup function of Drag'n Drop CD+DVD to back up a DVD-R/-RW or DVD+R/+RW disc that was made with other software on a different DVD-R/-RW or DVD+R/+RW recorder.

  • Page 90: Video (Dvd-R/-Rw/-Ram)

    Operating Basics Video (DVD-R/-RW/-RAM) As for InterVideo WinDVD Creater2 Platinum. Only the model that can be written in to DVD is attached. Note the following limitations when you write video to DVD: When installing, uninstalling or InterVideo WinDVD Creator 2 Platinum, the computer should be set to system administrator or equivalent privilege.

  • Page 91: Media Care

    Operating Basics Media care This section provides tips on protecting data stored on your CD/DVDs and floppy disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVDs 1.

  • Page 92: Sound System

    Operating Basics Sound System Using the microphone Your computer has a built-in microphone that can be used to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions. Since your computer has a built-in microphone and speaker, “howling” may be heard under certain conditions.

  • Page 93: Audio Effect

    To select a region, follow the steps below. 1. Click start, point to All Programs, point to TOSHIBA Internal Modem and click Region Select Utility. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 94: Properties Menu

    Operating Basics 2. The Region Selection icon will appear in the Windows Task Bar. Click the icon with the primary mouse button to display a list of regions that the modem supports. A sub menu for telephony location information will also be displayed. A check will appear next to the currently selected region and telephony location.

  • Page 95: Connecting

    Operating Basics Connecting To connect the modem cable, follow the steps below. The modular cable that comes with the computer must be used to connect a modem. Connect the end of the modular cable with the core to the computer. In case of a lightning storm, unplug the modem cable from the telephone jack.

  • Page 96: Wireless Communications

    TOSHIBA strongly recommend the customer to enable the WEP function. 2. TOSHIBA is not liable for the eavesdropping of data due to the use of wireless LAN and the damage thereof. 4-22...

  • Page 97: Bluetooth Wireless Technology

    Operating Basics Bluetooth wireless technology Bluetooth™ wireless technology eliminates the need for cables between electronic devices such as desktop computers, printers and mobile phones. You cannot use the built-in Bluetooth functions and an optional Bluetooth SD card 2 simultaneously. Bluetooth wireless technology has the following features: Worldwide operation The Bluetooth radio transmitter and receiver operate in the 2.4 GHz band, which is license-free and compatible with radio systems in most countries...

  • Page 98: Wireless Communication Indicator

    Operating Basics Wireless communication Indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indication Indicator off Wireless communication switch is set to off. Automatic power down because of overheating. Power malfunction Indicator glows Wireless communication switch is on. Wireless LAN or Bluetooth is turned on by an applica- tion.

  • Page 99: Connecting Lan Cable

    Operating Basics If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can connect with a CAT3 or highter. Connecting LAN cable To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer.

  • Page 100: Cleaning The Computer

    Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.

  • Page 101: Heat Dispersal

    CPU speed. Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the Cooling Method item of the Basic Setup tab in TOSHIBA Power Saver. Maximum Turns on the fan first, then if necessary, lowers the CPU Performance processing speed.
  • Page 102 Operating Basics 4-28 User’s Manual...

  • Page 103: Chapter 5 The Keyboard

    TECRA M2 Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.

  • Page 104: F1 ... F12 Function Keys

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 105: Hot Keys

    The Keyboard Press Fn + F10 or Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys (Fn + F11) or cursor control keys (Fn + F10). Refer to Keypad overlay section in this chapter for more information on how to operate these keys.
  • Page 106 Continue holding down Fn and press F2 again to change the setting. You can also change this setting through the profile item in TOSHIBA Power Saver. Standby: When you press Fn + F3, the computer enters Standby. To avoid entering Standby unexpectedly, a dialog box appears for verification.
  • Page 107 You can also change this setting through the Screen brightness item of the Basic Setup tab in TOSHIBA Power Saver. The brightness level is always set at the maximum value for about 18 seconds, when the LCD turns on.

  • Page 108: Fn Sticky Key

    Fn key. Fn Sticky key You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an “F number” key. To start the TOSHIBA Accessibility Utility, click start, point to All Programs, point to TOSHIBA, point to Utilities and click Accessibility.

  • Page 109: Keypad Overlay

    The Keyboard Keypad overlay Your computer’s keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the center of the keyboard with gray letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad on the 101/102-key enhanced keyboard in figure 5-2.

  • Page 110: Temporarily Using Normal Keyboard (Overlay On)

    The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off.

  • Page 111: Chapter 6 Power And Power-Up Modes

    TECRA M2 Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
  • Page 112 Power and Power-Up Modes Table 6-1 Power conditions continued Power on Power off (no operation) 2nd battery fully • Operates • No charge adaptor charged • No charge • LED: 2nd battery green connected • LED: 2nd Battery green DC IN 15V green DC IN 15V green 2nd Battery •...
  • Page 113 When the main battery is not charging. For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places in TOSHIBA Power Saver: the Hibernate window and the Battery Alarm item of the Alarm window. If a main battery and a 2nd battery are installed, the computer does not shut down until the charge in both batteries is exhausted.

  • Page 114: Power Indicators

    Power and Power-Up Modes Power indicators As shown in the above table, the Battery, Slim Select Bay, DC IN 15V and Power indicators on the system indicator alert you to the computer’s operating capability and battery charge status. Battery indicators Check the Battery indicator to determine the status of the main battery and the Slim Select Bay indicator to determine the status of the secondary battery.

  • Page 115: Power Indicator

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. Do not remove the battery pack while the computer is in Standby mode. Data is stored in RAM, so if the computer loses power it will be lost.

  • Page 116: 2Nd Battery (Option)

    Press [F1] key to set Date/Time. The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 117: Care And Use Of The Battery Pack

    Power and Power-Up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance.
  • Page 118 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 119: Charging The Batteries

    The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger.

  • Page 120: Battery Charging Notice

    Power and Power-Up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off High capacity battery pack (8800mAh) about 10.5 to 21.5 about 4.5 Main battery pack (4400mAh) about 5.0 to 11.0 about 2.5 2nd battery pack...

  • Page 121: Monitoring Battery Capacity

    Therefore, an often used, older battery will not operate for as long as a new battery even when both are fully charged. In this case, TOSHIBA Power Saver will indicate a 100% charge for both the old and new battery, but the displayed estimated time remaining will be shorter for the older battery.

  • Page 122: Retaining Data With Power Off

    Power and Power-Up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods about 16 days (Standby mode) High capacity battery pack (8800mAh) about 50 days (Boot mode) Battery pack (4400mAh) about 8 days (Standby mode) about 25 days (Boot mode)

  • Page 123: Replacing The Battery Pack

    Power and Power-Up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. The life of the battery pack is generally about 500 recharges. If the Battery indicator or Slim Select Bay indicator (if a Slim Select Bay 2nd battery pack is installed) flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced.

  • Page 124: Installing The Battery Pack

    Release Latch Figure 6-1 Releasing the battery pack For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to your TOSHIBA dealer. Installing the battery pack To install a battery, follow the steps below.

  • Page 125: Toshiba Password Utility

    Battery Pack Battery Lock Figure 6-2 Securing the battery cover TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Password Utility are different from the Windows password. User password To start the utility, point to or click the following items: Start ->...
  • Page 126 If an unformatted card or one with an incompatible format is inserted, you will be prompted to format it with a tool named TOSHIBA SD Memory Card Format.To start the format tool, point to or click the following items: Start ->...

  • Page 127: Supervisor Password

    Register, delete or change the supervisor password. Create or invalidate a supervisor password token This function in the TOSHIBA Password Utility lets you invalidate only supervisor tokens or all tokens, including user and supervisor tokens. Specify restrictions for general users.

  • Page 128: Power-Up Modes

    Turning off the power in Chapter 3, Getting Started. Windows utilities You can specify the setting in TOSHIBA Power Saver. Hot keys You can use hot keys Fn + F3 to enter Standby mode and Fn + F4 to enter Hibernation.

  • Page 129: Chapter 7 Hw Setup

    TECRA M2 Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. TOSHIBA HW Setup lets you configure settings for Display, CPU, Boot Priority, Keyboard, USB, LAN, General, Device Config and Parallel/Printer.

  • Page 130: Device Config

    HW Setup General This window displays the BIOS version and contains two buttons: Default and About. Return all HW Setup values to the factory Default settings. Display the HW Setup version. About Setup This field displays BIOS Version and date. Device Config Device Configuration This option lets you set the device configuration.
  • Page 131 HW Setup This function lets you set the CPU operating mode. Dynamic CPU Frequency Mode This option lets you choose from the following settings: CPU power consumption and clock speed Dynamically automatic switching function is enabled. When Switchable the computer is in use, CPU operation is automatically switched when necessary.

  • Page 132: Boot Priority

    HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select from the following settings: HDD −> FDD −> CD- The computer looks for bootable files in the ROM −> LAN following order: HDD, floppy disk drive* , CD- ROM* and LAN.
  • Page 133 HW Setup. Support of PC (ATA) card boot is guaranteed only for TOSHIBA PC card HDDs A PC (ATA) card takes the position of HDD in the Boot Priority Options list.
  • Page 134 [RPL] Sets RPL as the protocol. PC card HDD boot is supported only by the PC card slot on the computer. Support is guaranteed only for TOSHIBA PC card HDDs. When you assign a PC card HDD top priority, “PC” is not displayed.
  • Page 135 HW Setup Keyboard External Keyboard Fn key Use this option to set a key combination on an external keyboard to emulate the Fn key on the computer’s internal keyboard. Setting an Fn key equivalent will let you use Hot keys by pressing the set combination instead of the Fn key.
  • Page 136 HW Setup Built-in LAN This feature enables or disables the Built-in LAN. Enables Built-in LAN functions. (Default) Enabled Disables Built-in LAN functions. Disabled USB KB/Mouse Legacy Emulation Use this option to enable or disable USB KB/Mouse Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the USB KB/Mouse Legacy Emulation item to Enabled.

  • Page 137: Chapter 8 Optional Devices

    TECRA M2 Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory PC cards SD cards Memory expansion...

  • Page 138: Pc Cards

    The computer is equipped with a PC card expansion slot that can accommodate one 5 mm Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC cards.

  • Page 139: Sd Cards

    SD memory cards are sold with format in conformity to the Standards of SD memory card. If you format the SD card again, be sure to format it with the utility of TOSHIBA SD memory card format, not in the format defined as the Windows standard format.

  • Page 140: Installing An Sd Card

    Optional Devices Installing an SD card To insert an SD card, follow the steps below. 1. Insert the SD card. 2. Press gently to ensure a firm connection. SD card Figure 8-3 Inserting an SD card Make sure the SD card is oriented properly before you insert it. Removing an SD card To remove an SD card, follow the steps below.

  • Page 141: Sd Card Care

    8. Do not touch the metal part or expose it to liquids or let it get dirty. Creation of a boot disk In TOSHIBA SD Memory Boot Utility, a boot disk can be created with SD memory card. Refer to the Utilities of Chapter 1, Introduction for details.

  • Page 142: Installing Memory Module (Main Memory)

    Optional Devices Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost. a.The computer is turned on.
  • Page 143 Optional Devices 5. Slide the display latch on the front of the computer to the right and open the display panel. 6. Insert a thin object under the rim of the keyboard brace and lift out the brace. Remove a keyboard brace after surely performing step 4. If step 4 is not performed, there is a possibility of damaging a keyboard brace.
  • Page 144 Optional Devices 9. One screw of Metal brace which is pressing down the keyboard cable is removed. Metal brace is removed. Figure 8-8 Removing the metal brace Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.

  • Page 145: Removing Memory Module (Main Memory)

    Optional Devices Removing memory module (Main memory) To remove the memory module, make sure the computer is in boot mode then: 1. Turn the computer off and remove all cables connected to the computer. 2. Turn the computer upside down and remove the battery pack (refer to Chapter 6, Power and Power-Up Modes.)

  • Page 146: Installing Memory Module (2Nd Memory)

    Optional Devices Installing memory module (2nd memory) Follow the steps below to install a memory module. 1. Save data, shutdown Windows and turn the power off. 2. Remove the AC adapter cable and other cables from the computer. 3. Close the display panel and turn the computer over. Remove the battery pack.

  • Page 147: Removing Memory Module (2Nd Memory)

    Optional Devices 6. Reinstall the cover of the memory module slot. Fasten the screw you loosened in Step 4. Be sure that the cover is closed firmly. Figure 8-13 Seating the memory module cover 7. Reinstall the battery pack. After installing a memory module, turn the power of the computer on to see a total memory size.

  • Page 148: Hard Disk Drive Pack

    Optional Devices 6. Reinstall the cover of the memory module slot. Fasten the screw you loosened in Step 4. 7. Reinstall the battery pack. After installing a memory module, turn the power of the computer on to see a total memory size. The system will calculate the total memory size. Hard disk drive pack An extra HDD expands the flexibility of your system and lets you carry your data without carrying the computer.

  • Page 149: Installing The Hdd Pack

    Optional Devices 8. Lift the HDD pack and remove it. Figure 8-16 Removing the HDD pack Installing the HDD pack To install the hard disk drive, follow the steps below. 1. Place the HDD into the space for HDD. Slide the HDD to connect to the connector.

  • Page 150: Slim Select Bay 2Nd Battery Pack

    Optional Devices Slim Select Bay 2nd battery pack You can insert a 2nd battery pack in the computer’s Slim Select Bay. The battery comes with an adaptor. For details on using the adaptor, follow the steps below. For details on inserting modules in the Slim Select Bay, refer to Chapter 4, Operating Basics.

  • Page 151: Additional Ac Adaptor

    Optional Devices Additional AC adaptor If you frequently transport the computer between different sites such as your home and office, purchasing an AC adaptor for each location will reduce the weight and bulk of your carrying load. Battery charger The battery charger provides a convenient way to charge battery packs without requiring the use of your computer.

  • Page 152: External Monitor

    2. Connect the TV adaptor cable’s S-Video plug to the S-Video jack on the 3. Press the TOSHIBA Console button. You can use the hot keys Fn + F5 to change the display device. Refer to Chapter 5, Keyboard.

  • Page 153: Changing The Resolution

    Optional Devices When changing to "TV OUT" by "TOSHIBA Console button", it is "TOSHIBA controls" and it is necessary to set "TV OUT" as "TOSHIBA Console button" beforehand. If a television is connected to the computer, set the TV type in Display Properties.

  • Page 154: I.link (Ieee1394)

    There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.

  • Page 155: Disconnecting

    Optional Devices Note the following when you use i.LINK: You may need to install drivers for your i.LINK devices. Not all i.LINK devices have been tested. Therefore, compatibility with all i.LINK devices cannot be guaranteed. Use S100, S200 or S400 cables no longer than three meters. Some devices might not support standby or automatic off functions.

  • Page 156: Parallel Printer

    Optional Devices The following ports and accessories are available on the Advanced Port Replicator RJ45 LAN jack RJ11 Modem jack External monitor port Parallel port Serial port PS/2 mouse port PS/2 keyboard port DC IN 15V socket Security lock slot Audio line-in, line-out jacks Universal Serial Bus (four) IEEE 1394 port...

  • Page 157: Security Lock

    Optional Devices Security lock Security locks enable you to anchor your computer and optional Advanced Port Replicator to a desk or other heavy object to help prevent unauthorized removal of the computer or Advanced Port Replicator The computer has a security lock slot on the left side. Attach one end of a cable to a desk and the other end to the security lock slot.
  • Page 158 Optional Devices 8-22 User’s Manual...

  • Page 159: Chapter 9 Troubleshooting

    TECRA M2 Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 160: Preliminary Checklist

    Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 161: Hardware And System Checklist

    Troubleshooting Software The problems may be caused by your software or disk. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.

  • Page 162: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: The computer stops and does not proceed to display information or messages except the TOSHIBA logo.

  • Page 163: Ac Power

    Troubleshooting Computer shuts down Indicates a problem with the heat dispersal and its DC IN 15V system. Please contact your dealer. indicator is flashing in green AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN 15V indicator.

  • Page 164: Password

    Check the power consumption settings in Power Saver utility. Consider using a power saving mode. Password Problem Procedure Cannot enter Refer to the TOSHIBA Password Utility section in password Chapter 6, Power and Power-Up Modes. User’s Manual...

  • Page 165: Keyboard

    Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, Keyboard. Problem Procedure Some letter keys Check that the numeric keypad overlay is not produce numbers selected. Press Fn + F10 and try typing again. Output to screen is Make sure the software you are using is not garbled...

  • Page 166: Dvd-Rom Drive

    Troubleshooting DVD-ROM drive For more information, refer to Chapter 4, Operating Basics Problem Procedure You cannot access a CD/ Make sure the drive’s drawer is securely DVD in the drive closed. Press gently until it clicks into place. Open the drawer and make sure the CD/ DVD is properly seated.

  • Page 167: Cd-Rw/Dvd-Rom Drive

    Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.

  • Page 168: Dvd Multi Drive

    Troubleshooting DVD Multi drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive’s drawer is securely closed. CD/DVD in the drive Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated.

  • Page 169: Dvd±R/±Rw Drive (Dvd Dual Drive)

    Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.

  • Page 170: Floppy Disk Drive

    Chapter 2, The Grand Tour. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard duringwriting. Use only the software supplied with the computer for recording.

  • Page 171: Sd Card

    Troubleshooting SD card Refer also to Chapter 8, Optional Devices. Problem Procedure SD card error occurs Reseat the SD card to make sure it is firmly connected. Check the card’s documentation. You cannot write to an Make sure the card is not write protected. SD card You cannot read a file Make sure the target file is on the SD Card...

  • Page 172: Toshiba Dual Pointing Device

    Then click the Detail Setting button and click the Device Select tab. Check that the Touch Pad is not selected. Pressing Fn + F9 to enables TOSHIBA Dual Pointing Device. On-screen pointer The system might be busy. If the pointer is...

  • Page 173: Usb

    Troubleshooting Problem Procedure Double-clicking does Try changing the double-click speed setting in not work the mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Buttons tab. 3. Set the double-click speed as instructed and click OK.

  • Page 174: Memory Expansion

    Troubleshooting Memory expansion Refer also to Chapter 8, Optional Devices, for information on installing memory modules. Problem Procedure Beep sounds. Make sure the memory module installed in the expansion slot is compatible with the computer. (Two beeps, a dash and a dot, for a If an incompatible module has been installed, defective memory follow the steps below.

  • Page 175: Monitor

    Troubleshooting Monitor Refer also to Chapter 8, Optional Devices, and to your monitor’s documentation. Problem Procedure Monitor does not turn Make sure that the external monitor’s power switch is on. Confirm that the external monitor’s power cable is plugged into a working power outlet.

  • Page 176: Lan

    Troubleshooting Problem Procedure You place a call, but a Make sure the settings are correct in your connection can’t be communications application. made After making a call you Make sure the tone or pulse selection in your can’t hear a ring communications application is set correctly.

  • Page 177: Wireless Lan

    Troubleshooting Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Make sure the computer’s wireless Wireless LAN communication switch is set to on. If problems persist, contact your LAN administrator.

  • Page 178: Real Time Clock

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.

  • Page 179: Where To Write

    Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia Germany & Austria TOSHIBA Australia Pty. Ltd.
  • Page 180 TOSHIBA Information Systems Systems, Inc. (U.K.) Ltd. 9740 Irvine Boulevard TOSHIBA Court Irvine, California 92618 Weybridge Business Park Addlestone Road Weybridge, Surrey KT15 2UL The Rest of Europe TOSHIBA Europe (I.E.) GmbH Geschäftsbereich, Deutschland-Österreich Hammfelddamm 8, D-41460 Neuss, Germany 9-22 User’s Manual...

  • Page 181: Specifications

    TECRA M2 Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Weight (typical) 2.26 kilograms, configured with: 14"XGA, 256MB RAM, 40GB HDD, DVD-ROM drive, modem, LAN (100M Bit), Wireless LAN, 6cell battery. Weight will vary with other configurations. Above weights are measured at a specific criteria.

  • Page 182: Power Requirements

    Specifications Power Requirements AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 15 VDC 5.0 amperes Built-in Modem Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands...
  • Page 183 Specifications Network control unit (NCU) Communication Data transmission and reception speed 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 3600 bp Data reception only with V.90 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/ 40000/41333/42666/44000/45333/46666/48000/ 49333/50666/ 52000/53333/54666/56000 bps 2400/4800/7200/9600/12000/14400 bps Transmitting level -10 dBm Receiving level -10 to -40 dBm Input/output 600 ohms ±30% impedance Error correcting MNP class 4 and ITU-T V.42...
  • Page 184 Specifications User’s Manual...

  • Page 185: Display Controller And Modes

    TECRA M2 Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA), Super Extended Graphics Array (SXGA), Super Extended Graphics Array plus (SXGA+), support for the internal LCD and external monitors.
  • Page 186 Display Controller and Modes Table1 Video modes (VGA) Video Type Resolution Character Scanning mode matrix colors colors frequency (pels) Vertical (Hz) 0, 1 40 × 25 8 × 8 16 of 256K 16 of 256K Text Characters 2, 3 80 × 25 8 ×...
  • Page 187 Display Controller and Modes Table1 Video modes (VGA) continued Video Type Resolution Character Scanning mode matrix colors colors frequency (pels) Vertical (Hz) 320 × 200 8 × 8 16 of 256K 16 of 256K Grph Pels 640 × 200 8 × 8 16 of 256K 16 of 256K Grph...
  • Page 188 Display Controller and Modes Table 2 Video modes (XGA) Resolution Vertical colors colors frequency (Hz) 640 × 480 256/256K 256/256K 800 × 600 256/256K 256/256K 1024 × 768 256/256K 256/256K 1280 × 1024 256/256K 256/256K (Virtual) 1600 × 1200 256/256K 256/256K (Virtual) 1920 ×...
  • Page 189 Display Controller and Modes Table 2 Video modes (XGA) continued Resolution Vertical colors colors frequency (Hz) 640 × 480 64K/64K 64K/64K 800 × 600 64K/64K 64K/64K 1024 × 768 64K/64K 64K/64K 1280 × 1024 64K/64K 64K/64K (Virtual) 1600 × 1200 64K/64K 64K/64K (Virtual)
  • Page 190 Display Controller and Modes Table 2 Video modes (XGA) continued Resolution Vertical colors colors frequency (Hz) 640 × 480 16M/16M 16M/16M 800 × 600 16M/16M 16M/16M 1024 × 768 16M/16M 16M/16M 1280 × 1024 16M/16M 16M/16M (Virtual) 1600 × 1200 16M/16M 16M/16M (Virtual)
  • Page 191 Display Controller and Modes Table 3 Video modes (SXGA+) Resolution Vertical colors colors frequency (Hz) 640 × 480 256/256K 256/256K 800 × 600 256/256K 256/256K 1024 × 768 256/256K 256/256K 1280 × 1024 256/256K 256/256K 1400 × 1050 256/256K 256/256K 1600 ×...
  • Page 192 Display Controller and Modes Table 3 Video modes (SXGA+) continued Resolution Vertical colors colors frequency (Hz) 640 × 480 64K/64K 64K/64K 800 × 600 64K/64K 64K/64K 1024 × 768 64K/64K 64K/64K 1280 × 1024 64K/64K 64K/64K 1400 × 1050 64K/64K 64K/64K 1600 ×...
  • Page 193 Display Controller and Modes Table 3 Video modes (SXGA+) continued Resolution Vertical colors colors frequency (Hz) 640 × 480 16M/16M 16M/16M 800 × 600 16M/16M 16M/16M 1024 × 768 16M/16M 16M/16M 1280 × 1024 16M/16M 16M/16M 1400 × 1050 16M/16M 16M/16M 1600 ×...
  • Page 194 Display Controller and Modes B-10 User’s Manual...
  • Page 195 TECRA M2 Appendix C AT Commands In most cases, you will not need to type AT commands manually. However, there might be some occasions when you will need to do so. This chapter describes AT commands for data mode. Fax and voice commands are taken care of by application software.
  • Page 196 AT Commands Communication standard setting This command determines the communication standard CCITT or Bell. Selects CCITT V.22 mode when the modem is at 1200 bps. Selects Bell 212A when the modem is at 1200 bps (default). Selects V.21 when the modem is at 300 bps. Selects Bell 103J when the modem is at 300 bps (default).
  • Page 197 AT Commands Result Codes: n=0,1 ERROR Otherwise Hook control This command instructs the modem to go on-hook to disconnect a call, or off-hook to make the phone line busy. Modem goes on-hook (default). Modem goes off-hook. Result Codes: n=0,1 ERROR Otherwise Request ID information This command displays product information about the modem.
  • Page 198 AT Commands Modulation handshake This command controls whether or not the local modem performs a negotiated handshake at connection time with the remote modem when the communication speed of the two modems is different. When originating or answering, this is for handshake only at the communication standard specified by S37 and the ATB command.
  • Page 199 AT Commands Select tone dialing This command instructs the modem to send DTMF tones while dialing. Dialed digits are tone dialed until a P command or dial modifier is received. This is the default setting. DCE response format This command controls whether result codes (including call progress and negotiation progress messages) are displayed as words or their numeric equivalents.
  • Page 200 AT Commands Dial tone detect Disabled:The modem dials a call regardless of whether it detects a dial tone. Enabled: The modem dials only upon detection of a dial tone, and disconnects the call if the dial tone is not detected within 10 seconds.
  • Page 201 AT Commands &D2 If the DTR signal is not detected while in on-line data mode, the modem disconnects (default). &D3 Reset on the on-to-off DTR transition. Result Codes: n=0,1,2,3 ERROR Otherwise &FLoad factory settings This command loads the configuration stored and programmed at the factory.
  • Page 202 AT Commands &Tn Self-test commands These tests can help to isolate problems if you experience periodic data loss or random errors. &T0 Abort. Stops any test in progress. &T1 Local analog loop. This test verifies modem operation, as well as the connection between the modem and computer. Any data entered at the local DTE is modulated, then demodulated, and returned to the local DTE.
  • Page 203 AT Commands V.42, MNP, or buffered (default). The modem attempts to connect in V.42 error control mode. If this fails, it attempts to connect in MNP mode. If this fails, it connects in buffer mode and continues operation. This is also known as V.42/MNP auto reliable mode (same as &Q5).
  • Page 204 AT Commands Result Codes: n=0,3 ERROR Otherwise C-10 User’s Manual...
  • Page 205 TECRA M2 Appendix D S-registers S-registers contain the settings that determine how a number of functions of the internal modem operate. For example, how many times to let the telephone ring before the modem answers and how long to wait before it hangs up if a connection fails.
  • Page 206 S-registers Ring counter This register is read only. The value of S1 is incremented with each ring. If no ring occurs over a six-second interval, this register is cleared. Range: 0-225 Default: Units: rings AT escape character (user defined) This register determines the ASCII values used for an escape sequenzce.
  • Page 207 S-registers Command line editing character (user defined) This register sets the character recognized as a backspace and pertains to asynchronous only. The modem will not recognize the backspace character if it is set to a value that is greater than 32 ASCII.
  • Page 208 S-registers Comma pause time This register sets the time, in seconds, that the modem must pause when it encounters a comma (,) in the dial command string. In some countries/regions, S8 will set both wait before dialing and comma pause time. Range: 0-255 Default:...
  • Page 209 S-registers S37 Dial line rate S37 = 0 (default) maximum modem speed S37 = 1 reserved S37 = 2 1200/75 bps S37 = 3 300 bps S37 = 4 reserved S37 = 5 1200 bps S37 = 6 2400 bps S37 = 7 4800 bps S37 = 8...

  • Page 210: At Command Set Result Codes

    S-registers AT command set result codes The following table shows the result codes. The result code summary Result Code Numeric Description Command executed CONNECT Modem connected to line RING A ring signal has been detected NO CARRIER Modem lost carrier signal, or does not detect carrier signal, or does not detect answer tone...
  • Page 211 S-registers CONNECT 33600 EC* Connection at 33600 bps DELAYED* Delay is in effect for the dialed number BLACKLISTED* Dialed number is blacklisted BLACKLIST FULL* Blacklist is full *1: EC only appears when the Extended Result Codes configuration option is enabled. EC is replaced by one of the following symbols, depending upon the error control method used: V.42bis - V.42 error control and V.42bis data compression.
  • Page 212 S-registers User’s Manual...
  • Page 213 TECRA M2 Appendix E V.90 The TOSHIBA internal modem uses V.90 technology. The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Internet service provider that supports V.90. As with any modem, the actual throughput (speed of data transfer) depends on analog telephone line conditions, which can vary considerably.
  • Page 214 V.90 Table E-1 Result codes for a V.90 connection Result code Description CONNECT 32000 EC* Connection at 32000 bps CONNECT 36000 EC* Connection at 36000 bps CONNECT 40000 EC* Connection at 40000 bps CONNECT 44000 EC* Connection at 44000 bps CONNECT 48000 EC* Connection at 48000 bps CONNECT 52000 EC*...
  • Page 215 V.90 * EC stands for the Error Control method, which appears only when the extended result codes configuration option is enabled. EC is replaced by one of the following symbols, depending on the error control method used. V42bis V.42 error control and V.42bis data compression V.42 error control only NoEC No error control protocol...
  • Page 216 V.90 User’s Manual...

  • Page 217: Internal Modem Guide

    TECRA M2 Appendix F Internal Modem Guide This appendix describes how to install and the remove the internal modem. Do not disassemble the computer beyond the steps described in this instruction or touch any components not specifically described. Installing the internal modem The internal modem is preinstalled.

  • Page 218: Removing The Internal Modem

    Internal Modem Guide Removing the internal modem To remove the internal modem, follow the steps below. 1. Save your data and turn off the computer. 2. Disconnect the AC adaptor and any other peripheral device. 3. Turn the computer upside down and remove the battery pack. 4.

  • Page 219: Card Specifications

    TECRA M2 Appendix G Wireless LAN Card Specifications Form Factor Mini PCI TypeIII IEEE 802.11 Standard for Wireless LANS Compatibility Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The ‘Wi-Fi CERTIFIED’ logo is a certification mark of the Wi-Fi Alliance.
  • Page 220 Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 5GHz / 2.4GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 221 Wireless LAN 2457* 2462 2467* 2472* *1 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/ regions. that in which these channels can be used. When installing Wireless LAN cards, the channel configuration is managed as follows: For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point, When roaming between...
  • Page 222 Wireless LAN 5785* 5805* Wireless Channels Sets (Turbo Mode) Frequency Range 5150-5850 MHz Note Channel ID 5210* US only * 5250* US only * 5290* US only * 5760* US only * 5800* US only * * Available Area: US (USA, CANADA) only *3 These channels are available to A/B/G combo type only.

  • Page 223: Ac Power Cord And Connectors

    TECRA M2 Appendix H AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following...
  • Page 224 AC Power Cord and Connectors France: Switzerland: Germany: United Kingdom: In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.

  • Page 225: Parts Numbers

    TECRA M2 Appendix I Parts Numbers The computer configuration and parts numbers, printed on a label on the bottom of the computer, indicate the CPU, LCD, memory, HDD and communication devices. Configurations The following table shows the computer configuration indicated on a label.
  • Page 226 Parts Numbers User’s Manual...
  • Page 227 TECRA M2 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange...
  • Page 228 VGA: video graphics array VRT: voltage reduction technology XGA: extended graphics array AccuPoint: A pointing device integrated into the TOSHIBA computer keyboard. adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
  • Page 229 Glossary ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements. antistatic: A material used to prevent the buildup of static electricity. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
  • Page 230 Glossary byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory.
  • Page 231 Glossary compatibility: 1) The ability of one computer to accept and process data in the same manner as another computer without modifying the data or the media upon which it is being transferred. 2) the ability of one device to connect to or communicate with another system or component.
  • Page 232 Glossary delete: To remove data from a disk or other data storage device. Synonymous with erase. device driver: A program that controls communication between a specific peripheral device and the computer. The CONFIG.SYS file contains device drivers that MS-DOS loads when you turn the computer on. dialog box: A window that accepts user input to make system settings or record other information.
  • Page 233 (FDD): An electromechanical device that reads and writes to floppy disks. See also floppy disk. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders.
  • Page 234 Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 235 Glossary jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte.
  • Page 236 Glossary mode: A method of operation, for example, the boot mode, standby mode or the hibernation mode. modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received.
  • Page 237 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that lets you set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
  • Page 238 Glossary Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to. restart: Resetting a computer without turning it off (also called “warm boot” or “soft reset”). See also boot. RGB: Red, green, and blue. A device that uses three input signals, each activating an electron gun for a primary additive color (red, green, and blue) or port for using such a device.
  • Page 239 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 240 Glossary Glossary-14 User’s Manual...
  • Page 241 Battery pack 1-3, 2-6 Drag’n Drop CD+DVD 1-14, 4- additional 8-13 replacing 6-13 Dual Pointing Device 1-7, 1-15 Bluetooth 1-8, 4-23 AccuPoint 1-7, 2-9 problems 9-19 Touch Pad 1-7 TOSHIBA Stack, utility 1-13 Touch Pad control buttons Boot priority 7-4 User’s Manual Index-1...
  • Page 242 Index Touch Pad location 2-8 Fn + F2 (power save mode) 5-4 problems 9-14 Fn + F3 (standby) 5-4 using 4-2 Fn + F4 (hibernation) 5-4 DVD Multi drive 1-5 Fn + F5 (display selection) 5-4 location 2-3 Fn + F6 (display brightness) 5-5 problems 9-10 Fn + F7 (display brightness) 5-5 using 4-6...
  • Page 243 Index accessing 7-1 turning on the overlays 5-7 boot priority 7-4 CPU 7-3 LAN 1-8 device config 7-2 cable types 4-24 display 7-2 connecting 4-25 general 7-2 disconnecting 4-25 keyboard 7-7 jack 2-5 LAN 7-7 LAN active indicator 2-5 parallel/printer 7-2 Link indicator 2-5 USB 7-8 problems 9-18...
  • Page 244 SD card 9-13 indicators 6-4 self test 9-4 panel on/off 1-11, 6-18 sound system 9-16 problems 9-4 support from TOSHIBA 9- system auto off 6-18 turning off 3-7 system start-up 9-3 hibernation mode 3-7 Touch Pad/Accupoint 9-14 shut down mode (boot...
  • Page 245 TOSHIBA Power Saver 1-13 Self test, See Problems TOSHIBA Presentation button Slim Select Bay 2-3 1-10 charging modules 4-4 TOSHIBA SD Memory Boot Util- HDD adaptor 8-15 ity 1-14 indicator 2-11 TOSHIBA utilities 1-10 location of slot 2-3 TOSHIBA Zooming Utility 1-14...
  • Page 246 Index Wireless LAN 1-9 problems 9-19 using 4-22 Index-6 User’s Manual...

This manual is also suitable for:

Tecra m2-s319Ptm20

Table of Contents