Sony XC-HR90 Operating Instructions
Black-and-white video camera module
Hide thumbs
Also See for XC-HR90:
- Technical manual (41 pages) ,
- Manual (4 pages) ,
- Specifications (4 pages)
Advertisement
Quick Links
3-993-439-01 (1)
Black-and-White
Video Camera Module
Operating Instructions
XC-HR90
2006 Sony Corporation
Printed in Japan
•
•
•
D C
•
•
•
•
•
1
1
Owner's Record
The model and serial numbers are located on the bottom.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony
dealer regarding this product.
Model No. XC-HR90
Serial No. ______________
Important Safety Instructions
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Only use attachments/accessories specified by the
manufacturer.
• Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
WARNING
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
AVERTISSEMENT
Afin de réduire les risques d'incendie ou
d'électrocution, ne pas exposer cet appareil à
la pluie ou à l'humidité.
Afin d'écarter tout risque d'électrocution,
garder le coffret fermé. Ne confier l'entretien
de l'appareil qu'à un personnel qualifié.
WARNUNG
Um die Gefahr von Bränden oder elektrischen
Schlägen zu verringern, darf dieses Gerät
nicht Regen oder Feuchtigkeit ausgesetzt
werden.
Um einen elektrischen Schlag zu vermeiden,
darf das Gehäuse nicht geöffnet werden.
Überlassen Sie Wartungsarbeiten stets nur
qualifiziertem Fachpersonal.
For the customers in the USA
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
All interface cables used to connect peripherals must be shielded in
order to comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
For customers in Canada
This Class A digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.
A
DC-700
1
2
PC
3
4
DC+12V
0 40
•
•
•
XC-HR90
CCD Charge Coupled Device
SXGA
130
CCD
SXGA
1280 960
CCD
A
1
Example 1
/
Camera
2
Example 2
/
Camera
*
*
9
12
*
Cable with 9-pin and 12-pin connectors (For details, contact
your sony dealer or local authorized Sony service facility.)
PC
:
•
•
30 fps :
30 fps
54.1 fps
15 fps :
15 fps
30 fps
•
•
•
75
•
:
•
•
HD VD
HD VD
HD
VD
12
1/100 1/100000
1/4 1/100000
1
2
30 fps
: 54.1 fps
15 fps
: 30 fps
CCD
EIAJ12
WEN
B
XC-HR90
2
5
1
CCD
CCXC-12P02N 2m /05N 5m /10N 10m /
2
25N 25m)
VIDEO OUT/DC IN/SYNC
C
3
SXGA
DC-700
4
AC
5
VCT-55I
C
DC-700
DC-700
DC-700
DC-700
PC
DC IN/SYNC
1
1
C
VIDEO 1
2
2
75
CAMERA
3
3
CCXC-12P05N
AC IN
4
4
5
TRIG
5
AC
6
6
HD
7
VD/SYNC
8
HD
VD
9
D
C
)
1
C
C
10 mm
10 mm
1
2
2
3
4
4
VCT-55I
B
1
3
2
4
5
English
Note on Installing the Camera
Fig. A
When you install the camera with various peripheral devices and if the
devices have different ground electric potential, ground only one device. In
case there is a ground electric potential difference, the camera may be
damaged.
1 Power supply unit (DC-700/700CE)
2 Abnormal electricity
3 Ground electric potential difference
4 Host device (e.g., PC)
Notes on Operation
Before operating the unit, please read this manual thoroughly and retain it
for future reference.
Power supply
The camera operates on +12V DC. Use a stable power source free from
ripple or noise.
Foreign bodies
Be careful not to spill liquids, or drop any flammable or metal objects in the
camera body.
Locations for operation and storage
Avoid operation or storage in the following places.
• Extremely hot or cold locations. Recommended temperature range is 0°C
to 40°C. (32°F to 104°F)
• Locations subject to strong vibration
• Near generators of strong electromagnetic radiation such as TV or radio
transmitters.
Care
Use a blower to remove dust from the surface of the lens or optical filter.
Clean the exterior with a soft, dry cloth.
If the camera is very grimy, apply a cloth soaked in a mild detergent then
wipe with a dry cloth. Do not apply organic solvents such as alcohol or
benzine which may damage the finish.
Overview
The XC-HR90 is a monochrome video camera module using a progressive
scan CCD (Charge Coupled Device) solid state image sensor.
High image quality
The progressive scan CCD (1,300,000 dots, SXGA compliant) provides a
high-resolution image with 1280 × 960 pixels. By adopting square pixels,
images can be processed using the original aspect ratio without a
converting procedure.
Various mode settings
Rear panel switches, or sending a command from the host device allow the
following mode settings.
• Gain: Fix/Manual
• Read mode (30 fps): normal (30 fps)/binning (54.1 fps)
• Read mode (15 fps): normal (15 fps)/binning (30 fps)
• Partial scan
• Synchronized input/output
• 75Ω termination
• Shutter: Normal/Trigger shutter
• Shutter speed
External synchronization
HD (horizontal drive), VD (vertical drive) signals: The camera module
automatically detects the HD and VD signals input and externally
synchronized with those signals.
Internal sync signal output
You can output the HD and VD signals from the 12-pin connector by
changing the rear panel switch.
Electronic shutter function
Shutter speed can be selected from a wide range (1/100 to 1/100000 sec.).
External trigger shutter function (1/4 to 1/100000 sec.)
You can obtain a freeze picture by inputting an external trigger. This
function is useful to shoot a fast-moving object clearly.
Partial scan
The camera module can limit the number of effective video output lines to
achieve high frame rates, enabling high-speed image processing.
Binning
Video signals combining vertically adjacent lines can be obtained at
following frame rate:
In Read mode (30 fps): 54.1 fps
In Read mode (15 fps): 30 fps
Body fixing
The screw holes to install the camera module are located under the front
panel (the CCD reference plane). Installing the camera module on the front
panel minimizes deviation of the optical axis.
The connector complies with the EIAJ 12-pin assignment
The pin arrangement allows the connector to accept a trigger pulse and a
WEN signal.
C
XC-HR90
D
System Components
Fig. B
The Black-and-White Video Camera Module XC-HR90 system comprises
the following products. (The products 2 to 5 are available separately.)
1 Black-and-White Video Camera Module
This is a small-size, high-resolution, monochrome video camera module
using a progressive scan CCD image sensor.
2 CCXC-12P02N (2m, 6.6ft)/05N (5m, 16.4ft)/10N (10m, 32.8ft)/25N
(25m, 82ft) camera cable
This is attached to the VIDEO OUT/DC IN/SYNC connector of the camera
module and is used for power supply, transmission of video signals, and
exchange of sync signals.
3 C-mount lens
Choose a lens of sufficiently high resolution (SXGA compliant).
Note
Sufficient resolution may not be obtained when a lens other than the one
recommended is used.
4 DC-700/700CE camera adaptor
This is connected to the camera module to enable power supply from
ordinary AC power source, and also handles transmission of video signals
from the camera module and exchange of sync signals between the camera
module and an external sync signal generator.
5 VCT-55I tripod adaptor
This attaches to the bottom of the camera module to fix the camera module
to a tripod.
Connection example
Fig. C
Connecting DC-700/700CE (not supplied)
Connect the camera module to the power via the camera adaptor DC-700/
700CE.
For details on the camera adaptor DC-700/700CE, see the DC-700/700CE
Instruction Manual.
1 Host device (e.g., PC)
1 DC IN/SYNC connector
2 C-mount lens
2 To VIDEO 1 connector
3 75-ohm coaxial cable
3 To CAMERA connector
4 Camera cable (e.g. CCXC-12P05N) 4 To AC IN connector
5 TRIG generator, Image processor
5 To AC power source
6 Sync signal generator
6 To HD connector
7 To VD/SYNC connector
8 HD output
9 VD output
Location and Function of Parts and Operation
Fig. D
Front/Top/Bottom
1 Lens mount (C-mount)
Attach any C-mount lens or other optical equipment.
Note
The lens must not project more than 10 mm (13/32 inch) from the lens
mount.
1 Lens mount face
2 10 mm (13/32 inch) or less
2 Auxiliary screw holes (Top)
3 Reference screw holes/Tripod adaptor screw holes (bottom)
These precision screw holes are for locking the camera module. Locking
the camera module into these holes secures the optical axis alignment.
For details, refer to the Technical Manual.
You can install the camera on a tripod. To install on a tripod, you will need
to install a tripod adaptor VCT-55I to the camera on the reference screw
holes.
Advertisement
Related Manuals for Sony XC-HR90
Summary of Contents for Sony XC-HR90
- Page 1 The model and serial numbers are located on the bottom. Record the serial number in the space provided below. XC-HR90 Black-and-White Refer to these numbers whenever you call upon your Sony dealer regarding this product. Example 1 Video Camera Module Model No.
- Page 2 DIP switch setting 30 fps 15 fps Shutter speed : 30 fps mode Shutter speed : 15 fps mode Partial scan mode Gain control Binning mode / unit: second) / unit: second) MANUAL 1/2 V 1/4 V 1/125 1/2 V partial 1/4 V partial scan scan...