If they do not match, the following message appears. You must repeat step 1.
If you enter the password incorrectly three times in a row, the computer will
shut down.
You will not be able to access the password option in the HW Setup. In this
case you must turn the power off and back on in order to retry the
procedure.
4. Follow the same procedures described in the earlier section,
the
Display
This tab allows you to customize your computer's display settings for either
the internal LCD screen or for an external monitor.
Power On Display
Allows you to set the display to be used when the computer is booted up.
Auto-Selected
System LCD only
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer. Select the boot
priority from the drop down list.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Sleep mode, you can
turn on the computer by pressing any key. It is effective only for the internal
keyboard and only when the computer is in Sleep mode.
Enabled
Disabled
User's Manual
Incorrect Password!!!
password, to set a new user password.
If any external display is connected, the power on
display will be in "external display only" mode.
Otherwise it will be in "LCD only" mode.
Irrespective of external display connection, the
power on display will be in integrated "LCD only"
mode.
Enables the Wake-up on Keyboard feature.
Disables the Wake-up on Keyboard function
(Default).
HW Setup and Passwords
How to set
7-3