Sony VPCJ111FX Replacement Instructions
Vpcj1 series optical disk drive replacement instructions
Hide thumbs
Also See for VPCJ111FX:
- User manual (152 pages) ,
- Safety information manual (21 pages) ,
- Replacement instructions (3 pages)
Advertisement
Quick Links
These easy instructions are intended to guide you through the replacement process.
Before you begin, place your computer on a clean or covered surface to avoid damage to the
computer's case.*
Follow the ESD (Electrostatic Discharge) damage prevention instructions:
o Hold parts by the edges, away from exposed circuitry when possible.
o Do not walk around excessively as this promotes static build-up.
Before you begin, remove any jewelry you may be wearing to prevent scratches to the surface
of your computer.*
The appearance of the electronic components shown in the illustrations may be different from
the components shipped. This slight difference does not affect the accuracy of these
instructions.
* Sony is not responsible for damage caused by incorrect handling of the computer.
Step 1. With the Computer powered on,
eject the Optical Disk Drive (ODD).
P/N 989201985
Rev. B
VPCJ1 Series Optical Disk Drive
IMPORTANT!
PLEASE READ BEFORE YOU START
Step 2. Turn off the computer and
disconnect the AC Adapter.
Failure to do so can result in
damage to the computer.
Place the computer upside down on a
protected surface with the front edge
facing you.
Replacement Instructions
CAUTION:
1/3
Optical Drive Removal
(Steps 3-6)
Step 3. The Optical Disk Drive is
located on the Left side of the unit as
shown.
Advertisement
Related Manuals for Sony VPCJ111FX
Summary of Contents for Sony VPCJ111FX
- Page 1 The appearance of the electronic components shown in the illustrations may be different from the components shipped. This slight difference does not affect the accuracy of these instructions. * Sony is not responsible for damage caused by incorrect handling of the computer. Optical Drive Removal Step 2. Turn off the computer and disconnect the AC Adapter.
- Page 2 VPCJ1 Series Optical Disk Drive Replacement Instructions Step 4. Using the enclosed magnetic Step 5. Gently pull the ODD tray out Step 6. Move your fingers down to screwdriver, loosen the two (2) screws so that it is completely exposed. the base of the ODD Assembly and securing the ODD Bay.
- Page 3 VPCJ1 Series Optical Disk Drive Replacement Instructions Reconnect the AC Adaptor. Return the old ODD to Sony following the included shipping instructions Step 12. Reinstall the two (2) ODD Step 13. Snap the the new ODD Bezel Assembly screws to secure the ODD on to the ODD Assembly to install.