Table of Contents
Advertisement
Chapter 11
Handling MVS Connectivity Problems
Port Switching Printer Sharing
To support printer sharing, IBM 10/100Base-T Ethernet Interface
printers automatically switch among all attached ports (serial port,
the twinax or coax port, or the Ethernet network port). Basically, the
printer prints jobs for one port until no new jobs appear and the port
"times out". The printer then switches to the next port and does the
same thing.
To change the default "time out" value for a port, update the
TIMEOUT value for the port on the appropriate menu (Serial
Interface, Ethernet, Twinax Interface, or Coax Interface).
Handling MVS Connectivity Problems
SMART
If you encounter problems when "ping"-ing a network printer from
MVS, here is how to resolve them.
Ping is Not Successful
If the "ping" is not successful, verify the following:
•
The printer is powered on.
•
The IP address is unique in the TCP/IP network.
If the IP address of the MVS system is not unique, see your
network administrator to resolve the IP address problem.
•
The Maximum Transmission Unit (MTU) size of the IP packet
for the MVS system is equal to the MTU size of the printer. For
information about the values recommended for the MVS
system, see "Modify the TCP/IP Profile in MVS" on page 228.
To change the MTU size for the MVS system, change the
GATEWAY statement in the MVS TCP/IP profile, and restart
TCP/IP to pick up the changes.
You cannot change the MTU size on an IBM 10/100Base-T
Ethernet Interface printer. The MTU size is fixed at 1024 bytes.
If these items are all in order, consult your TCP/IP network
administrator about a possible network problem.
240
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
