Page 1 Toshiba Personal Computer Satellite L300D/L305D Satellite Pro L300D EQUIUM L300D SATEGO L300D (PSLC8x/PSLC9x) (PSLCAx/PSLCBx) Maintenance Manual TOSHIBA CORPORATION S/ No Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 2 © 2008 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contained herein.
Page 3 NOTE: “Note” contains general information that relates to your safe maintenance service. Improper repair of the computer may result in safety hazards. Toshiba requires service technicians and authorized dealers or service providers to ensure the following safety precautions are adhered to strictly.
Page 4: Hardware Overview
The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite L300D/L305D / Satellite Pro L300D / EQUIUM L300D / SATEGO L300D system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems.
Page 5 Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example: Read Only Memory (ROM) Keys Keys are used in the text to describe many operations.
Page 6 Table of Contents Chapter 1 Hardware Overview Features..............Error! Bookmark not defined. System Unit Components ........Error! Bookmark not defined. 2.5-inch HDD ............Error! Bookmark not defined. Combo CD-RW/DVD-ROM........Error! Bookmark not defined. DVD Super Multi (+-R Double Layer)....Error! Bookmark not defined. Power Supply............
Page 7: Table Of Contents
Procedure 4 Test Program Check ..............2-13 Procedure 5 Connector Check and Replacement Check ........2-14 Keyboard.......................2-15 Procedure 1 Test Program Check ..............2-15 Procedure 2 Connector Check and Replacement Check ........2-15 Display........................2-16 Procedure 1 External Monitor Check..............2-16 Procedure 2 Test Program Check ..............2-16 Procedure 3 Connector Check and Replacement Check ........2-16 ODD (Optical Disk Drive)..................2-18 Procedure 1 ODD Cleaning Check ..............2-18...
Page 8 3.2.6 Audio Record Test......... Error! Bookmark not defined. 3.2.7 DMI Read ..........Error! Bookmark not defined. 3.2.8 DMI Write ..........Error! Bookmark not defined. System Information........ Error! Bookmark not defined. 3.2.9 3.2.10 View Logs..........Error! Bookmark not defined. 3.2.11 Exit to 700 DOS ........Error! Bookmark not defined. 3.2.12 The Diagnostics Screen Explanation ..
Page 9 Safety Precautions ....................4-2 Before You Begin....................4-4 Disassembly Procedures..................4-5 Assembly Procedures ...................4-5 Tools and Equipment ...................4-6 Screw Tightening Torque..................4-6 Colors of Screw Shanks ..................4-7 Symbols of Screws on the Computer Body............4-7 Symbol examples ....................4-7 Removing the Battery Pack ..................4-8 Installing the Battery Pack..................4-9 Removing the Optional PC Card................4-10 Installing the Optional PC Card .................4-11 Removing the Momery Card ................4-12...
Page 10 Removing the Wireless LAN Card ..............4-26 Installing the Wireless LAN Card ..............4-27 Top Cover ......................4-28 Removing the Top Cover ...................4-28 Installing the Top Cover..................4-29 Display Assembly......................4-30 Removing the Display Assembly ...............4-30 Installing the Display Assembly.................4-31 System Board......................4-32 Removing the System Board…................4-32 Installing the System Board................4-33 4.10 CPU Cooling Module and Fan ................4-34...
Page 11 4.18 Touch Pad and Touch Pad Board ................4-51 Removing the Touch Pad and Touch Pad Board ..........4-51 Installing the Touch Pad and Touch Pad Board ..........4-52 4.19 USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable ..4-53 Removing USB / CRT / Power Button Board / AC-IN / RJ11 cable....4-53 Installing USB / CRT / Power Button Board / AC-IN / RJ11 cable ....4-54 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D...
Page 12 Appendices Appendix A Handling the LCD Module................A-1 Appendix B Board Layout ....................B-1 Appendix C Pin Assignments.................... C-1 Appendix D Keyboard Scan/Character Codes..............D-1 Appendix E Key Layout ....................E-1 Appendix F BIOS Rewrite Procedures ................F-1 Appendix G EC/KBC Rewrite Procedures ................ G-1 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 13 Chapter 1 Hardware Overview...
Page 14 1 Hardware Overview Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 15 1 Hardware Overview Chapter 1 Contents 1.1 Features ..........................5 1.2 System Unit Components....................12 1.3 2.5-inch HDD ........................17 1.4 Combo CD-RW/DVD-ROM..................... 18 1.5 DVD Super Multi (+-R Double Layer) ................19 1.6 Power Supply ........................20 1.7 Batteries..........................21 1.1.1 Main Battery ..................
Page 16 1 Hardware Overview Figures Figure 1-1 ID Parts Description Placement ................9 Figure 1-2 Computer Block Diagram ..................10 Figure 1-3 System Board Configurations ................11 Figure 1-4 System Unit Block Diagram...................12 Figure 1-5 SATA HDD......................17 Figure 1-6 Combo CD-RW/DVD-ROM Drive ...............18 Tables Table 1-1 HDD Specifications....................17 Table 1-2 Combo CD-RW/DVD-ROM Drive Specifications ..........18 Table 1-3 DVD Super Multi Drive Specifications..............19...
Page 17: Features
1 Hardware Overview 1.1 Features The Toshiba Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D is a full size notebook PC based on the mobile AMD Turion64 X2 and Athlon X2 Processors, providing high-speed processing capabilities and advanced features. The computer employs a Lithium Ion battery that allows it to be battery-operated for a longer period of time.
Page 18 1 Hardware Overview 1.1 Features 4096 MB (512M×64) / 667/800MHz Hard Disk Drive (HDD) The computer accommodates 2.5-inch 9.5mm / 12.5mm height Serial ATA HDD with following storage capacities: 80 GB (9.5mm thick) SATA (5,400rpm) 120 GB (9.5mm thick) SATA (5,400rpm) 160 GB (9.5mm thick) SATA (5,400rpm) 200 GB (9.5mm thick) SATA (5,400rpm) 250 GB (9.5mm thick) SATA (5,400rpm)
Page 19 This slot is for your memory card requirements like SD, Mini-SD, SD-IO, MS, MS Pro, MMC and XD Cards to provide memory card read on your computer. Toshiba Pointing Device Toshiba Pointing Device has one kind of Synaptic Touchpad. Sound System Realtek ALC268 integrated audio controller supports multimedia. The sound system...
Page 20 1 Hardware Overview 1.1 Features The internal LAN supports 10/100Mbit, enabling connection to a LAN at up to 100Mbps. It supports Wake-up on LAN from S3/S4/S5 and PXE boot support. This internal LAN has RJ45 jack with signal reception LED to directly accommodate a LAN cable.
Page 21: Figure 1-1 Id Parts Description Placement
1.1 Features 1 Hardware Overview Figures 1-1/1-2/1-3 and 1-4 show the computer and its system unit configuration, respectively. Figure 1-1 ID Parts Description Placement Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 22: Figure 1-2 Computer Block Diagram
1 Hardware Overview 1.1 Features Figure 1-2 Computer Block Diagram Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 23: Figure 1-3 System Board Configurations
1.1 Features 1 Hardware Overview Figure 1-3 System Board Configurations Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 24: System Unit Components
1 Hardware Overview 1.2 System Unit Components 1.2 System Unit Components Figure 1-4 is Block Diagram of the System Unit. Figure 1-4 System Unit Block Diagram Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 25 1.2 System Unit Components 1 Hardware Overview The system unit of the computer consists of the following components: Processor: AMD Turion64 X2 and Athlon X2 Processor. Turion64 X2 Processor − Core Speed: 2.0 GHz − I/O Bus: 1600 MHz − On-die Level 2 Cache: 1 MB Athlon X2 Processor −...
Page 26 1 Hardware Overview 1.2 System Unit Components − FV04 Size: 104KB − FV04 Free Space: 19KB System Controllers North Bridge: AMD RS780MN/MC − CPU Hyper Transport 3.0 Interface − Memory Interface − ATi Hyper Memory − PCI Express Interface − A-Link Express II Interface −...
Page 27 1.2 System Unit Components 1 Hardware Overview 4 GPIOs (GPIO0/GPIO3 are digital GPIO shared with digital MIC interface, GPIO1/GPIO2 are analog) for customized applications High quality analog differential CD input 2 jack detection pins each designed to detect up to 4 jacks Supports hardware digital volume control for digital microphone input Supports external PCBEEP input and built-in digital BEEP generator KBC/EC (Keyboard Controller/Embedded Controller)
Page 28 1 Hardware Overview 1.2 System Unit Components Ring wake-up support Azalia interface Communication codes supported: − For data communication: V.90 (China)/V.92, data rates: 28kbps/56kbps V.34 extended rates: 33.6K/2400/V.32 turbo, V.32 bits and fallbacks − For fax: V.17, V.27, V.29, V.34 and V.21 Channel 2 V.253 Class 1 fax LAN Controller Realtek RTL8102E 10/100Mbit...
Page 29: Inch Hdd
1.3 2.5-inch HDD 1 Hardware Overview 1.3 2.5-inch HDD The computer contains an extremely low-profile, lightweight and high-performance HDD. The HDD incorporates 9.5 mm or 12.5 mm height magnetic disk and mini-Winchester type magnetic heads. The HDD interface conforms to Serial ATA. Storage capacities supported are 80, 120, 160, 200, 250, 300, 320, 400 &...
Page 30: Combo Cd-Rw/Dvd-Rom
1 Hardware Overview 1.4 Combo CD-RW/DVD-ROMombo CD-RW/DVD-ROM 1.4 Combo CD-RW/DVD-ROM The Combo CD-RW/DVD-ROM drive accepts 12-cm (4.72-inch) and 8-cm (3.15-inch) discs. At maximum, the drive can play back a DVD at 8x speed, read CD-ROM at 24x speed, and write CD-R at 24x speed, HS CD-RW at 10x speed, US CD-RW at 24x speed and CD-RW at 4x speed.
Page 31: Dvd Super Multi (+-R Double Layer)
1.5 DVD Super Multi (+-R Double Layer)yer) 1 Hardware Overview 1.5 DVD Super Multi (+-R Double Layer) The DVD Super Multi drive accepts 12-cm (4.72-inch) and 8-cm (3.15-inch) discs. At maximum, the drive can play back a DVD at 8x speed, read CD-ROM at 24x speed, and write CD-R at 24x speed, CD-RW at 4x speed, US CD-RW at 24x speed, High Speed CD- RW at 10x speed, DVD-R at 8x speed, DVD-RW at 6x speed, DVD+R at 8x speed, DVD+R (Double Layer) at 4x speed, DVD-R (Double Layer) at 4x speed, DVD+RW at 8x speed and...
Page 32: Power Supply
1 Hardware Overview 1.6 Power Supply 1.6 Power Supply The power supply unit provides many different voltages for the system board and performs the following functions: 1. Power input monitor Checks whether the DC power supply (AC adapter) is connected to the computer. Checks whether the battery pack is connected to the computer.
Page 33: Batteries
1.6 Power Supply 1 Hardware Overview 1.7 Batteries The computer has the following four types of batteries: Main Battery Pack Real Time Clock (RTC) Battery Table 1-4 lists the specifications of these batteries. Table 1-4 Battery Specifications Output Battery Type Material Capacity Voltage...
Page 34: Rtc Battery
1 Hardware Overview 1.7 Batteries Table 1-5 Quick/Normal Charging Time State Charge Time Off-State Charge On-State Charge NOTE: The time required for normal charge depends on the power consumption by the system. Using the fluorescent lamp and frequently accessing the disk consume much power and lengthen the charge time.
Page 35 2 Troubleshooting ¡ Chapter 2 Troubleshooting Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 36 2 Troubleshooting Chapter 2 Contents Outline ........................2-1 Basic Flowchart ......................2-2 Power Supply......................2-6 Procedure 1 Power Icon Check ...............2-6 Procedure 2 Connection Check ...............2-8 Procedure 3 Replacement Check..............2-8 System Board......................2-9 Procedure 1 Message Check ................2-9 Procedure 2 Test Program Check ..............2-10 Procedure 3 Replacement Check..............2-10 2.5-inch HDD .......................
Page 37 2 Troubleshooting 2.10 Audio Test......................2-21 Procedure 1 Test Program Check ..............2-21 Procedure 2 Connector Check and Replacement Check .......2-21 2.11 Cooling Module ....................2-22 Procedure 1 Test Program Check ..............2-22 Procedure 2 Connector Check and Replacement Check .......2-22 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-iii...
Page 38 2 Troubleshooting Figures Figure 2-1 Basic Flowchart....................2-3 Tables Table 2-1 HDD Error Code and Status.................2-13 2-iv Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 39: Outline
3. Cleaning disk kit (for ODD drive cleaning) 4. Bootable CD 5. Multimeter 6. External monitor 7. Headphone 8. Microphone 9. A-BEX TEST DVD 10. Music CD 11. DVD TSD-1 (TOSHIBA EMI DVD Test Media) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 40: Basic Flowchart
2 Troubleshooting 2.2 Basic Flowchart 2.2 Basic Flowchart The basic flowchart in Figure 2-1 serves as a guide for identifying a possibly faulty FRU. Before going through the diagnostic flowchart steps, verify the following: Ask the user if a password has been registered and, if so, ask him or her to enter the password.
Page 41 Follow the system board diagnostic Any error message displayed ?? procedure in Section 2.4 Follow the display diagnostic Message "In Touch with Tomorrow Toshiba" displayed procedure in Section 2.7 See the previous page to "Password=" displayed ?? delete the password.
Page 42 2 Troubleshooting 2.2 Basic Flowchart Follow the keyboard diagnostic Keyboard works well ?? procedure in Section 2.6 Insert Bootable CD into ODD Follow the ODD diagnostic Diagnostic Program procedure in Section 2.8 Loaded ?? Perform each test with the diagnostic program. Identify the test resulting in the error Any error detected by the and perform the appropriate...
Page 43 2.2 Basic Flowchart 2 Troubleshooting If the diagnostic program cannot detect an error, the error may be intermittent. Run the continuous test program repeatedly to isolate the problem. Check the log utilities function to confirm which diagnostic test detected the error, then perform the appropriate troubleshooting procedures as follows: 1.
Page 44: Power Supply
2 Troubleshooting 2.3 Power Supply 2.3 Power Supply The power supply in the computer controls many functions and components. To check if the power supply is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Power Icon Check Procedure 2 Connection Check Procedure 3...
Page 45 2.3 Power Supply 2 Troubleshooting DC IN LED DC IN LED Power supply status On in Green DC power being supplied (from the AC adapter) Battery damage and can’t charge during DC-in. Else If the DC IN LED off, follow the steps below: 1.
Page 46 2 Troubleshooting 2.3 Power Supply Procedure 2 Connection Check Power is supplied to the system board as illustrated below: System board adaptor AC power cord AC adaptor cord Battery pack Follow the steps below to check whether each connector has been connected correctly: Check 1 Make sure the AC adaptor and AC power cord have been firmly plugged into the DC IN socket and wall outlet, respectively.
Page 47: System Board
2.4 System Board 2 Troubleshooting 2.4 System Board To check if the system board is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 Test Program Check Procedure 3 Replacement Check Procedure 1 Message Check When the power is turned on, the system performs the self-diagnostic Power on Self Test (POST) embedded in the BIOS ROM.
Page 48: Procedure 2 Test Program Check
2 Troubleshooting 2.4 System Board Procedure 2 Test Program Check The maintenance test program contains several programs for diagnosing the system board and CPU. Execute the following test programs using the procedures described in Chapter 3. 1. System test 2. Memory test 3.
Page 49: Inch Hdd
2.5 2.5-inch HDD 2 Troubleshooting 2.5 2.5-inch HDD To check if the 9.5mm or 12.5mm HDD is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Message Check Procedure 2 Partition Check Procedure 3 Format Check Procedure 4 Test Program Check Procedure 5 Connector Check and Replacement Check CAUTION: The contents of the HDD will be erased when the HDD diagnostic test or formatting is executed.
Page 50 2 Troubleshooting 2.5 2.5-inch HDD create a DOS partition on drive C. Then restart the computer. If the problem persists, go to Procedure 3. Check 3 If drive C is listed as active in the FDISK menu, perform Check 4. If drive C is not listed as active, return to the FDISK menu and choose the option to set the active partition for drive C.
Page 51: Procedure 4 Test Program Check
2.5 2.5-inch HDD 2 Troubleshooting Procedure 4 Test Program Check Run the HDD test program stored on the maintenance test program disk for all test items. See Chapter 3 for details on how to use the test program. If an error is detected during the HDD test, an error code and status will be displayed. The error codes and their status names are listed in Table 2-1.
Page 52: Procedure 5 Connector Check And Replacement Check
2 Troubleshooting 2.5 2.5-inch HDD Procedure 5 Connector Check and Replacement Check The HDD or system board may be faulty. Disassemble the computer following the steps described in Chapter 4 and perform the following checks: Check 1 Make sure the following connectors have been firmly connected to the HDD, system board and CPU.
Page 53: Keyboard
2.6 Keyboard 2 Troubleshooting 2.6 Keyboard To check if the computer’s keyboard is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 Test Program Check Execute the Keyboard test available as part of the maintenance test program.
Page 54: Display
2 Troubleshooting 2.7 Display 2.7 Display To check if the computer’s display is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 External Monitor Check Procedure 2 Test Program Check Procedure 3 Connector Check and Replacement Check Procedure 1 External Monitor Check Connect an external monitor to the computer's external monitor port, then boot the computer.
Page 55 2.7 Display 2 Troubleshooting 3. If there is still an error, perform Check 4. Check 4 The FL inverter board may be faulty. Replace it with a new one and return to Procedure 3. If there is still an error, perform Check 5. Check 5 Make sure the LCD/FL cable has been firmly connected to the system board and LCD module.
Page 56: Odd (Optical Disk Drive)
CD in the computer's CD, turn on the computer and run the test. Then insert a test ODD (Toshiba-EMI DVD-ROM TEST DISK TSD-1) into the ODD drive. See Chapter 3 for information on how to perform the test.
Page 57 2.8 ODD Drive 2 Troubleshooting Check 3 The ODD drive may be faulty. Replace the ODD drive with a new one following the steps in Chapter 4. If the ODD drive is still not functioning properly, perform Check 4. Check 4 The system board may be faulty.
Page 58: Lan
2 Troubleshooting 2.9 LAN 2.9 LAN To check if the computer’s LAN is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 Test Program Check Execute the LAN check program available as part of the maintenance test program.
Page 59: Audio Test
Error! Reference source not found.Error! Reference source not found. Audio Test Troubleshooting 2.10 Audio Test To check if the computer’s Speaker is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 Test Program Check Execute the Audio test available as part of the maintenance test program.
Page 60: Cooling Module
2 Troubleshooting 2.11 Cooling Module 2.11 Cooling Module To check if the computer’s cooling module is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Test Program Check Procedure 2 Connector Check and Replacement Check Procedure 1 Test Program Check Execute the Fan On/off test program available as part of the maintenance test program.
Page 61 2.11Cooling Module 2 Troubleshooting Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-23...
Page 62 Chapter Diagnostic Programs...
Page 63 3 Diagnostic Programs Chapter Contents General .......................... 1 Quick Start........................3 3.2.1 Quick Test....................3 3.2.2 Customization Test .................. 3 3.2.3 Keyboard Layout test................7 3.2.4 Hotkey Test....................8 3.2.5 Audio Play Test ..................8 3.2.6 Audio Record Test................... 9 3.2.7 DMI Read ....................
Page 64 3 Diagnostic Programs Communication (COMM)................... 55 3.10 Peripheral ........................56 3.11 Error Codes and description..................58 3.12 Quick Test Item List....................63i...
Page 66: General
3.1 General 3 Diagnostic Programs General This chapter explains the diagnostic programs which tests and diagnoses the functions of the hardware components of this computer. The diagnostic programs can be classified into two types: OPTION and DIAGNOSTIC TEST. NOTE 1: This Diagnostic supports 6DFUDPHQWR$3 NOTE 2: Before test must set SATA Controller Mode to “Compatibility”...
Page 67 A Service Diagnostic BOOT CD A Formatted FLOPPY DISK A Test Media CD (A-BEX TEST CD-ROM TCDR-702)(for CD-ROM test) A Test Media DVD (Toshiba-EMI DVD-ROM TEST DISK TSD-1) An External Monitor (for DISPLAY test) A CD-ROM Driver (for CD-ROM test)
Page 68: Quick Start
3.2 Quick Start 3 Diagnostic Programs Quick Start When the system is booting from Service Diagnostic CD, the following screen will be displayed: Please select a test item or select 0 to exit to )UHH-DOS: 3.2.1 Quick Test When this item is selected, the system will run the configured test items and generate a test report automatically.
Page 69 3 Diagnostic Programs 3.2 Quick Start Select ‘Test Mouse’ or press F8 to run the test. The prompt information would be displayed in the screen as below. This test item needs user to verify whether the mouse works normally. The test result will be displayed in the following screen:...
Page 70 3.2 Quick Start 3 Diagnostic Programs Here is another method to run the test: Highlight a test item by using arrow keys, then, press Enter to start. If there are parameters provided, user should set parameters in the parameter dialog window. CPU Speed Test (Step by Step): Select test item: Select System—CPU—CPU Speed, then, press the Enter key.
Page 71 3 Diagnostic Programs 3.2 Quick Start Test Result System will automatically run and display the test result as follows: Following is the comparison report of the two testing methods mentioned above: 1) Configuration and Running As to the method used in Mouse test, the user is required to select test items by pressing Space key and set the parameters artificially, (See 3.3.3 Item’s Parameters Configuration) Then press F8 to start the test.
Page 72: Keyboard Layout Test
3.2 Quick Start 3 Diagnostic Programs As to the method adopted in CPU Speed test, user should highlight the test item and press Enter to start testing. And the user has to setup the parameters every time before running the test. Using this method, only one test item would be tested at one time. 3.2.3 Keyboard Layout test The test purpose is to check whether 30 kinds of keyboards run well during the test procedure.
Page 73: Hotkey Test
3 Diagnostic Programs 3.2 Quick Start It requires user to press the key and check whether the key in the screen changes color or not. User can terminate test by typing ‘END’. When testing the ‘Fn’ key, it must press the ‘Enter’ key at the same time. When the user has checked all the keys and all the keys in the screen have changed color, the diagnostics program would automatically end the test and report the pass information.
Page 74: Audio Record Test
3.2 Quick Start 3 Diagnostic Programs 3.2.6 Audio Record Test Check whether the system could record the sound normally. If there is no error during the whole test, Pass; otherwise Fail. The test will repeat for four times. When the test is completed, a file named autest.log will be saved in the defined location.
Page 75 3 Diagnostic Programs 3.2 Quick Start In this screen, All lines which attribute could be edited and updated. The 1 line (the font in yellow with blue background) shows the attribute’s value that is read from the current system and the 2 line (the font in red with turquoise background) shows the same value as that in the 1 line before user’s editing.
Page 76: System Information
3.2 Quick Start 3 Diagnostic Programs The attributes that have been modified would be marked in red; otherwise in yellow. User could press F2 to save the changes, or press F4 to ignore and exit the current program. 3.2.9 System Information This function is used to read the system information.
Page 77: View Logs
3 Diagnostic Programs 3.2 Quick Start User can use function keys listed on the bottom of the screen to display the configuration of the component or exit the current program. On the left column, the components information is listed and user can use arrow keys or PgUp/PgDn to view the list and highlight the chosen component.
Page 78: Exit To )Uhh Dos
3.2 Quick Start 3 Diagnostic Programs 3.2.11 Exit to 700 DOS Select this item to exit to )UHH DOS. 3.2.12 The Diagnostics Screen Explanation Below is an example of running a test item. It includes the following parts: Diagnostics Windows, Test Status Area, Progress Bar, Error List, Test Item’s Title, Status Bar and Message Box.
Page 79 3 Diagnostic Programs 3.2 Quick Start The error list of each test module is displayed at the lower right corner of the screen. It would display the total error quantity found in the test, the most recent five error codes and description would be shown here.
Page 80 3.2 Quick Start 3 Diagnostic Programs Current Time(C. TIME): Current system time, e.g. ‘C.TIME:2008-0-16 :42:40’ in the above screen; Test Time Remaining (LEFT): In TIMEBOUND mode, it would display the remaining test time at the same location as Current TIME (C. TIME) in the above screen; Current Loop Count: In LOOPBOUND mode, it will display the total LOOP number planning to execute and the current LOOP number have been finished, e.g.
Page 81: Options
3 Diagnostic Programs 3.3Option Options 3.3.1 Overview In Service Diagnostics, with the Options menu user can configure the batch parameters, test item’s parameters and those parameters created by the LOG file. Options Menu Notes: Select All/None Items • Switch between selecting all test items and selecting none. The hot key is F6. Test Selected Items •...
Page 82: Batch Parameters Configuration
3.3 Option 3 Diagnostic Programs Configure batch parameters and all the test item’s parameters. Load Batch Parameters • Upload all the test items and the parameters to the *.ini file. Save Batch Parameters • Save all the parameters and the test items that are configured in the editor to a specified file.
Page 83 3 Diagnostic Programs 3.3Option Test Order • Specify the order of the test items. Choose 'Sequence' to adopt the sequential mode; choose 'Random' to run the test items in random sequence. Test Options • Choose one of the following options: Wait On Error Wait for further confirmation while an error occurs.
Page 84: Item's Parameters Configuration
3.3 Option 3 Diagnostic Programs Monitor the remaining battery capacity (percent). Monitor CPU Thermal Monitor the CPU temperature. Test Mode • LOOPBOUND The chosen test items will run repeatedly according to the times specified in the 'Number of Loops'. TIMEBOUND The chosen test items will run for an extent time specified in 'Time Limit Hrs' and 'Time Limit Min'.
Page 85: Load Batch Parameters
3 Diagnostic Programs 3.3Option Repeat times of the test item. Interactive • If the item is enabled during the test, the test items that need user to response can run normally, such as PS2 Mouse test; If it is disabled, those test items will report FAIL.
Page 86: Save Batch Parameters
3.3 Option 3 Diagnostic Programs In this window, you can specify the .INI files that you wanted to be edited or modified. 3.3.5 Save Batch Parameters Here you can save the edited or modified content to the batch parameters files.
Page 87: Log Parameters Setting
3 Diagnostic Programs 3.3Option 3.3.6 LOG Parameters Setting You can access the Log Parameters screen through Service Diagnostics\Options - Generate Report. Report Destination • If selecting 'NONE', no log file will be generated; if selecting 'FILE', a log file with the name specified in 'Log File Name' will be generated.
Page 88: Specify Log Viewer
3.3 Option 3 Diagnostic Programs If selecting this parameter, errors and time will be recorded only when the test fails. Append to Old Log File If selecting this parameter, the new log will be added to the old one. Log Device Info on Fail If selecting this parameter, details of the failed test will be recorded.
Page 89: Log Viewer
3 Diagnostic Programs 3.3Option In this screen, you can specify a Log file and view it with the viewer designated in Specify LOG Viewer. 3.3.9 LOG Viewer Service Diagnostic Log viewer: ↑, ↓ • Scroll a line backward or forward on the screen. Page Up, Page Down •...
Page 90: Log File Sample
3.3 Option 3 Diagnostic Programs Scroll a page backward or forward on the screen. • Exit the Log viewer. • Display the Help information about the Log viewer operations and the functional keys. Ctrl+Home • Go to the start of the log file. Ctrl+End •...
Page 91 3 Diagnostic Programs 3.3Option Base Memory Test : PASS Extended Memory Test : PASS End Time: Wed Jul 05 10:47:51 2006 <Module Name>: Service Diagnostic Ver 1.00 ... Mouse Test Build Date 2006.01.10 [MSTPad] Begin Time: Wed Jul 05 10:48:54 2006 Touch Pad Test : FAIL ITEM TEST FAIL...
Page 92: Subtests
3.4 Subtests 3 Diagnostic Programs Subtests Test Test Item Subtest Test items Internal Name Group System Basic Functionality Test [CPUBasicFun] CPU Speed [CPUSpeed] Coprocessor Coprocessor NPU Basic Functions [NPUFun] NPU Interrupt [NPUInterrupt] CPU Information [CPUInformation] CPU Protected Mode [Protect] [MMX] Board DMA Controller [DMACtrl]...
Page 93 3 Diagnostic Programs 3.4 Subtests Memory Random Increment Read/Write [RandIncr] Data Bus Test [DataBus] Memory Speed [MemSpeed] Test Storage Sequential/Random R/W [SeqRdRW1] Sequential/Random Seek [Seek1] Performance [Perform1] Controller Check [Controller1] Diagnostic Read/Write [DiagRW1] SMART Test [SMART1] Controller Test [CDRWController] Data Transfer Rate [CDRWTransRate] Data CD Butterfly Seek [CDRWButterfly]...
Page 94 3.4 Subtests 3 Diagnostic Programs VESA x K Mode VESA x32bit Mode Video Modes VESA 1 x256 Mode _15] VESA 1 x64K Mode _16] VESA 1 x32 Mode _24] VESA 1 x K Mode _32] VESA 1 x32bit Mode VESA Video [VESAMEM] Memory AGP Test...
Page 95: System Test
3 Diagnostic Programs 3.5 System Test System Test Move arrow keys and press the Space key to select CPU test item from Service Diagnostic menu, then highlight CPU and press the Enter to run this test item. Subtest 01 CPU 1.
Page 96 3.5 System Test 3 Diagnostic Programs CPU Speed Comparison--Whether you want to make a comparison of the CPU speed with the value set in ‘Expected CPU Speed’, you should choose ‘Yes’; otherwise, ‘No’. Expected CPU Speed--Specify the expected CPU Speed value you want for further comparison.
Page 97 3 Diagnostic Programs 3.5 System Test 5. CPU Protected Mode Test This test item is to check whether CPU protected mode instruction works normally. 6. MMX The test item is to confirm whether the CPU supports MMX instructions. Subtest 02 Boards 1.
Page 98 3.5 System Test 3 Diagnostic Programs This test item is to check: 1. Whether the current system supports Plug-n-Play; 2. Whether there is an ESCD (Extended System Configuration Data) in the BIOS; 3. Whether there is PCI-to-ISA bridge in the system; 4.
Page 99 3 Diagnostic Programs 3.5 System Test...
Page 100: Memory Test
3.6 Memory Test 3 Diagnostic Programs Memory Test This test module is to check whether the memory chip works normally. Subtest 01 BIOS ROM This test item is to check the validity of BIOS ROM that includes two sub-items -- ROM Read and ROM Write Protection.
Page 101 3 Diagnostic Programs 3.6 Memory Test Pattern Size: Choose the pattern size – BYTE, WORD, DWORD or ALL. Percent (%): Choose the percentage of the defined range of the memory to be tested. Time Limit(h): Choose or Input the time (hour) of the defined range of the memory to be tested.
Page 102 3.6 Memory Test 3 Diagnostic Programs test coverage would be based on the setting and the value in ‘Percent (%) mentioned at below. Pattern Size: Choose the pattern size – BYTE, WORD, DWORD or ALL. Percent (%): Choose the percentage of the defined range of the memory to be tested.
Page 103 3 Diagnostic Programs 3.6 Memory Test In addition to the above pattern test of the memory, there is Read/Write Cycle test and Read Cycle Test for the extended memory. Below is the parameter dialog window of the extended pattern test. Test Range: Specify the test coverage range of Extended Memory.
Page 104 3.6 Memory Test 3 Diagnostic Programs The test item is to ensure that there is no short circuitry issue in memory chip. The parameter dialog window is the same as that in ‘Subtest 02 Pattern’. Subtest 06 Walking 0’s Test The test item is to ensure that there is no open circuitry issue in memory chip.
Page 105 3 Diagnostic Programs 3.6 Memory Test This test item is to check whether the data bus works normally. Subtest 12 Memory Speed Test This test item is to check the data-transferring rate for the cache memory and the system memory.
Page 106: Storage
3.7 Storage 3 Diagnostic Programs Storage Subtest 01 HDD This test item runs on IDE hard disks. It checks the functions and performance of IDE hard disk. In order to protect user’s HDD data, the password must be verified before the HDD test.
Page 107 3 Diagnostic Programs 3.7 Storage LBA Start, LBA End--Specify the start and end byte in LBA (Large Block Address). Percent—Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested.
Page 108 3.7 Storage 3 Diagnostic Programs Percent-- Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested; Time Limit(m): Choose or Input the time (minute) of the defined range of the total disk to be tested.
Page 109 3 Diagnostic Programs 3.7 Storage Subtest 02 ODD The ODD test runs on IDE CDROM/DVD-ROM & CD-RW. It will check the ODD driver’s functionality and performance. 1. Controller Test Check the CDROM controller’s status. 2. Data Transfer Rate Check the data transfer rate of the ODD drive. It will read data from the ODD disc and calculate the data transfer rate.
Page 110: Video
3.10 Peripheral 3 Diagnostic Programs Video This test item tests the video by: displaying the figures in different graphic modes. displaying the property and color of the characters in different text modes. User will confirm whether each video mode works normally by judging whether the display is correct.
Page 111 3 Diagnostic Programs 3.10 Peripheral It would display the below texts of the different attributes in the screen: 1. Text in normal attribute; 2. Text in blinking normal attribute; 3. Text in inverse attribute; 4. Text in blinking inverse attribute; 5.
Page 112 3.10 Peripheral 3 Diagnostic Programs 4. Text Color This test item is to check whether all 16 colors foreground and all 8 colors background works normally in VGA text mode. The bit4-6 of the attribute byte of a character defines 8 background colors (black, blue, green, cyan, red, brown, magenta, and light gray), and the bit0-3 defines 16 foreground colors (dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and white besides the above 8 colors).
Page 113 3 Diagnostic Programs 3.10 Peripheral This test item is to check whether 80*25 Text Mode works normally. In the test, user is required to respond according to the instruction in the screen. Subtest 02 640 * 480 VGA Mode This test item is to check whether 680*480 VGA Text mode works normally. In the test, user is required to respond according to the instruction in the screen.
Page 114 3.10 Peripheral 3 Diagnostic Programs Subtest 03 VESA Video Modes This test item is to check whether all the video modes supported by the video card works normally. In the test, user is required to respond following the instruction in the screen. 1.
Page 115 3 Diagnostic Programs 3.10 Peripheral If press Ctrl+Break to force the test to terminate during execution of VESA Video Memory, the test program will not operate and display properly in further tests. Subtest 05 AGP Test This test item is to report the system’s Accelerated Graphics Port status and check whether AGP registers works normally.
Page 116 3.10 Peripheral 3 Diagnostic Programs Subtest 07 Register Test This test item is to check whether the registers of the video adapter works normally. Subtest 08 Color Purity Test This test item is to check whether the system (the video adapter and the display) could display the purity color of red, green, blue, black and white.
Page 117 3 Diagnostic Programs 3.10 Peripheral Subtest 09 Direct Color Test This test item is to check the video adapter’s composing ability of direct color in high and true color mode. In the test, user is required to respond according to the instruction in the screen. Subtest 10 DAC/Palette Address This test item is to check the function of DAC registers and Palette registers.
Page 118 3.10 Peripheral 3 Diagnostic Programs NOTE 1:AMD platform can’t support this item Subtest 11 BitBlt Engine Test This test item is to check whether the BitBlt engine works normally. BitBlt is the abbreviation of ‘Bit Block Translate’, that means the copy of data block for 3 types, from video memory to video memory, from video memory to system memory, and from system memory to video memory.
Page 119 3 Diagnostic Programs 3.10 Peripheral NOTE 1:AMD platform can’t support this Test item...
Page 120: Communication (Comm)
3.10 Peripheral 3 Diagnostic Programs Communication (COMM) Subtest 01 LAN Card This test item is to check whether the module can detect the existence of the network card and display its related information. 1. Device ID Detection Detect the device ID of the network card. 2.
Page 121: Peripheral
3 Diagnostic Programs 3.10 Peripheral 3.10 Peripheral Subtest 01 Keyboard This test item is to check whether the keyboard works normally. 1. Keyboard Data Line Test Check whether the keyboard data line works normally. 2. Keyboard Clock Line Test Check whether the keyboard clock line works normally. Subtest 02 Mouse Test Check whether the point devices work normally.
Page 122 3.10 Peripheral 3 Diagnostic Programs Subtest 03 Led Test 1. Led Test Check whether the Device led works normally. NOTE 1:If The Machine is AMD Platform, The HDD LED is very Dim...
Page 123: Error Codes And Description
3 Diagnostic Programs 3.11Error Codes and Description 3.11 Error Codes and description The format of ‘Error Code’ is ‘ddxxee’, and ‘dd’ is the device ID (1~2 chars), ‘xx’ is test function ID of device (2 chars), ‘ee’ is the error code of device (2 chars); the range of error code is from 01 to 99 in each device (the common error codes in all device are set to 99 and spanned).
Page 124 3.11Error Codes and Description 3 Diagnostic Programs The test pattern read out from the extension memory is different (XMS)Memory Problem As above. from the one that has been written in this address. (XMS) Out Of Range Wrong parameters setup. Check and reset the parameters. Interference between different Test this memory chip on Address Test Error...
Page 125 3 Diagnostic Programs 3.11Error Codes and Description configuration. Repeat multiple times. If there is PCI to ISA Bridge Error PCI-ISA bridge errors. always the same error, replace the board. ESCD Error ESCD errors. As above. ACPI Table Test Error Errors with the ACPI table test. As above. 34xx Fan Slow Speed Test Fail The fan slow speed test fails.
Page 126 3.11Error Codes and Description 3 Diagnostic Programs Check whether there is any Physical problems with the video VESA VRAM Test Error physical problem with the video card or the monitor. card or the monitor. Check and see whether the AGP AGP configuration register AGP Test Error video card has any physical...
Page 127 3 Diagnostic Programs 3.11Error Codes and Description Keyboard Map & Stroke Keyboard Map & Stroke Test Check the KBD connection and Test Fail fails. repeat the test. Clock Line Test Fail Clock Line Test fails. As above. Data Line Test Fail Data Line Test fails.
Page 128: Quick Test Item List
3.12 Quick Test Item List 3 Diagnostic Programs 3.12 Quick Test Item List Device Test Items Comment Basic Functionality NPU Basic Functions CPU Information Memory BIOS ROM Cache Memory Bit Stuck High Test 10% or 3 minutes Bit Stuck Low Test 10% or 3 minutes Address Test Board...
Page 129 Chapter 4 Replacement Procedures...
Page 130 4 Replacement Procedures 4-ii Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual...
Page 131 4 Replacement Procedures Chapter 4 Contents General ........................4-1 Safety Precautions ....................4-2 Before You Begin....................4-4 Disassembly Procedures..................4-5 Assembly Procedures ...................4-5 Tools and Equipment ...................4-6 Screw Tightening Torque..................4-6 Colors of Screw Shanks ..................4-7 Symbols of Screws on the Computer Body............4-7 Symbol examples ....................4-7 Removing the Battery Pack ..................4-8 Installing the Battery Pack..................4-9 Removing the Optional PC Card................4-10...
Page 132 4 Replacement Procedures Installing the Keyboard ..................4-23 MDC Module ......................4-24 Removing the MDC Module................4-24 Installing the MDC Module ................4-25 Wireless LAN Card ....................4-26 Removing the Wireless LAN Card ..............4-26 Installing the Wireless LAN Card ..............4-27 Top Cover.........................4-28 Removing the Top Cover ...................4-28 Installing the Top Cover..................4-29 Display Assembly......................4-30 Removing the Display Assembly ...............4-30...
Page 133 4 Replacement Procedures Removing the CCD and MIC................4-48 Installing the CCD and MIC................4-49 4.17 Speakers ........................4-50 Removing the Speakers ..................4-50 Installing the Speakers..................4-50 4.18 Touch Pad and Touch Pad Board ................4-51 Removing the Touch Pad and Touch Pad Board ..........4-51 Installing the Touch Pad and Touch Pad Board ..........4-52 4.19 USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable...4-53...
Page 134 4 Replacement Procedures Figures Figure 4-1 Removing the battery pack ..................4-8 Figure 4-2 Removing the PC card..................4-10 Figure 4-3 Removing the memory card................4-12 Figure 4-4 Removing the optional memory ................4-14 Figure 4-5 Removing the HDD pack ...................4-16 Figure 4-6 Removing the HDD chassis................4-17 Figure 4-7 Removing the ODD bay module ................4-19 Figure 4-8 Removing the bracket from ODD drive ............4-21 Figure 4-9 Removing the keyboard ..................4-22...
Page 135 4 Replacement Procedures Figure 4-29 Removing CCD board and MIC ...............4-48 Figure 4-30 Removing the speakers ..................4-50 Figure 4-31 Removing the touch pad and button board ............4-51 Figure 4-32 Removing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable ....................4-53 4-vii Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual...
Page 136: General
4.1 General 4 Replacement Procedures General This chapter explains how to disassemble the computer and replace Field Replaceable Units (FRUs). Some replacement procedures may not require you to remove all the surrounding FRUs to replace only one FRU. The chart below shows the FRUs in the order in which they should be removed in a top-down manner, irrespective of their physical locations.
Page 137: Safety Precautions
DANGER: Always use the genuine batteries or replacement batteries authorized by Toshiba. Batteries other than those differ in specifications and are incompatible with the computer. They may burst or explode. To avoid leakage of alkaline solutions, never heat or disassemble the battery packs.
Page 138 For AC input, be sure to use the AC adapter and AC power cable that come with your computer or Toshiba-recommended equivalents. To avoid the risk of electrical shock, make sure that all the replacement components meet the specifications of the computer and that all the cables and connectors are fastened securely.
Page 139: Before You Begin
4 Replacement Procedures 4.1 General Before You Begin Before you begin to disassembly the computer, keep in mind the precautions and advice in this section. Always begin disassembly by removing the AC adapter and battery pack. Remove the optional parts and accessories as well. The procedures for removing the batteries will be explained later.
Page 140: Disassembly Procedures
4.1 General 4 Replacement Procedures Disassembly Procedures The cable connectors come in these two basic types: Pressure plate connectors Normal pin connectors To remove a pressure plate connector, pull up the tabs on either side of the connector's plastic pressure plate and gently pull the cable out of the connector. To reconnect the cable to the pressure plate's connector, raise the pressure plate up to a satisfactory height and slide the cable into the connector.
Page 141: Tools And Equipment
4 Replacement Procedures 4.1 General Tools and Equipment For your safety and that of other people in the working environment, it is strongly recommended that you use electrostatic discharge (ESD) equipment. The proper use of this equipment will ensure successful repair work and reduce the costs for repairing damaged components.
Page 142: Colors Of Screw Shanks
4.1 General 4 Replacement Procedures Colors of Screw Shanks For easy identification of the correct screws, the screw shanks are colored according to their lengths, as follows: Screws of an even-numbered length Brown Screws of an odd-numbered length White Screws of a special length Black Screws of a special length are those of a length having decimal places, such as 2.5 mm and 2.6 mm.
Page 143: Removing The Battery Pack
4 Replacement Procedures 4.1 General Removing the Battery Pack Remove the battery pack according to the following procedures and Figure 4-1. CAUTION: When handling the battery packs, use care not to short circuit the terminals. Do not drop, hit, twist, or bend the battery packs. Do not scratch or break up their casing.
Page 144: Installing The Battery Pack
Always dispose of the battery packs as required by local ordinances or regulations. Use only replacement batteries recommended by Toshiba. NOTE: Visually check the battery's terminals. If they are dirty, clean them with a dry cloth.
Page 145: Removing The Optional Pc Card
4 Replacement Procedures 4.1 General Removing the Optional PC Card Remove the optional PC card according to the following procedures and Figure 4-2, after checking that the computer is turned off in boot mode. CAUTION: Install or remove the PC card correctly, according the manuals for the PC card and the operating system you are using.
Page 146: Installing The Optional Pc Card
4.1 General 4 Replacement Procedures Installing the Optional PC Card Install the optional PC card according to the following procedures and Figure 4-2, after checking that the computer is turned off in boot mode. 1. Insert the PC card gently until it stops and is seated securely. 2.
Page 147: Removing The Momery Card
4 Replacement Procedures 4.1 General Removing the Memory Card Remove the memory card according to the following procedures and Figure 4-3, after checking that the computer is turned off in boot mode. 1. Open the card cover. 2. Push the memory card to be removed until it stops then release the memory card. 3.
Page 148: Installing The Momery Card
4.1 General 4 Replacement Procedures Installing the Memory Card Install the memory card according to the following procedures and Figure 4-3, after checking that the computer is turned off in boot mode. 1. Insert the memory card gently until it stops and is seated securely. 2.
Page 149: Removing The Optional Memory
4 Replacement Procedures 4.1 General Removing the Optional Memory Remove the optional memory (module) according to the following procedures and Figures 4- 4, after checking that the computer is turned off in boot mode. CAUTION: Remove the optional memory after turning off the computer. If this is violated, the computer or memory can be damaged.
Page 150: Installing The Optional Memory
4.1 General 4 Replacement Procedures Installing the Optional Memory Install the optional memory (module) according to the following procedures and Figures 4-4, after checking that the computer is turned off in boot mode. Note: The slot A is reserved for main memory. Use the slot B for expanded memory. If only one card is installed, use the slot A.
Page 151: Hdd
4 Replacement Procedures 4.2 HDD Removing the HDD CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive. Remove the HDD (hard disk drive) according to the following procedures and Figures 4-5, 4- 1.
Page 152 4.2 HDD 4 Replacement Procedures 3. Remove the HDD pack by pulling on the tab attached to the pack, following the direction of the arrows. NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails. 4.
Page 153: Installing The Hdd
4 Replacement Procedures 4.2 HDD Installing the HDD Install the HDD according to the following procedures and Figures 4-5, 4-6. CAUTION: To avoid damage, always hold the HDD only by its sides. 1. Attach the HDD chassis. 2. Secure the HDD and its chassis with the two M3x4 black flat head screws with M3x4 white head screws.
Page 154: Odd Bay Module
4.3 ODD Bay Module 4 Replacement Procedures ODD Bay Module Removing the ODD Bay Module NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bay. See the appropriate sections for the disassembly procedures of specific modules.
Page 155: Installing The Odd Bay Module
4 Replacement Procedures 4.3 ODD Bay Module Installing the ODD Bay Module Install the ODD bay module according to the following procedures and Figures 4-7. 1. Place the ODD bay module in the correct position and slide it in. 2. Push it in until it clicks into place. 3.
Page 156 4.3 ODD Bay Module 4 Replacement Procedures Disassembling the ODD Drive NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails. Disassemble the ODD drive according to the following procedures and Figure 4-8. 1.
Page 157: Keyboard
4 Replacement Procedures 4.4 Keyboard Keyboard Removing Keyboard Remove the Keyboard according to the following procedures and Figure 4-9. 1. Release the following 12 latches on the keyboard cover, in that order: - One latch on each of the left and right sides - Five bottom latches - Five front latches 2.
Page 158: Installing The Keyboard
4.4 Keyboard 4 Replacement Procedures Installing the Keyboard Install the keyboard according to the following procedures and Figure 4-9. 1. Connect the keyboard cable to CN11 on the system board. 2. Secure the keyboard with two M2x3 black bind screws. 3.
Page 159: Mdc Module
4 Replacement Procedures 4.5 MDC Module 4.5 MDC Module Removing the MDC Module Remove the MDC Module (Modem Daughter Card) according to the following procedures and Figures 4-10, after checking that the computer is turned off in boot mode. CAUTION: Remove the MDC module after turning off the computer. If this is violated, the computer or MDC module can be damaged.
Page 160: Installing The Mdc Module
4.5 MDC Module 4 Replacement Procedures Installing the MDC Module Install the MDC module according to the following procedures and Figures 4-10, after checking that the computer is turned off in boot mode. CAUTION: Install the MDC module after turning off the computer. If this is violated, the computer or MDC module can be damaged.
Page 161: Wireless Lan Card
4 Replacement Procedures 4.6 Wireless LAN card 4.6 Wireless LAN Card Removing the Wireless LAN Card Remove the wireless LAN card according to the following procedures and Figure 4-11. CAUTION: Do not touch the connectors on the wireless LAN card and in the computer with your bare hands.
Page 162: Installing The Wireless Lan Card
4.6 Wireless LAN Card 4 Replacement Procedures Installing the Wireless LAN Card Install the wireless LAN card according to the following procedures and Figure 4-11. 1. Insert the wireless LAN card into the CN10 an angle of 45 degrees. 2. Press down on the wireless LAN card to secure it with two M2x3 black flat head screws.
Page 163: Top Cover
4 Replacement Procedures 4.7 Top Cover 4.7 Top Cover Removing the Top Cover Remove the top cover according to the following procedures and Figures 4-12 and 4-13. 1. Turn the computer upside down and remove the following 14 screws: - Eleven M2.5x7 black flat head screws and three M2x4 black flat head screws. M2 5x6 black M2 5x6 black flat head screw...
Page 164: Installing The Top Cover
4.7 Top Cover 4 Replacement Procedures M2 5x6 black flat head screw Latch Top cover Speakers cable Touch pad board flat cable Figure 4-13 Removing the top cover Installing the Top Cover Install the top cover with the display assembly according to the following procedures and Figures 4-12, 4-13.
Page 165: Display Assembly
4 Replacement Procedures 4.7 Display Assembly 4.8 Display Assembly Removing the Display Assembly CAUTION: Use care to avoid that the antenna cable is not caught between the display assembly and computer. Remove the display assembly according to the following procedures and Figures 4-14, 4-15. 1.
Page 166: Installing The Display Assembly
4.7 Display Assembly 4 Replacement Procedures M2 5x6 black flat head screw LCD FL cable CCD cable Wireless MIC cable LAN antenna CN13 Figure 4-15 Removing the display assembly Installing the Display Assembly Install the display assembly according to the following procedures and Figures 4-14, 4-15. 1.
Page 167: System Board
4 Replacement Procedures 4.9 System Board 4.9 System Board Removing the System Board NOTE: Be careful of the eject button for the PC card. It can be damaged when removing the board. Make sure it is securely installed. Remove the System Board and Figure 4-16. 1.
Page 168: Installing The System Board
4.9 System Board 4 Replacement Procedures Installing the System Board Install the System Board according to the following procedures and figure 4-16. NOTE: Be careful of the eject button for the PC card. It can be damaged when installing the system board.
Page 169: Cpu Cooling Module And Fan
4 Replacement Procedures 4.10 CPU Cooling Module and Fan 4.10 CPU Cooling Module and Fan CAUTION: When removing the cooling module, keep the following in mind: The cooling module can become very hot during operation. Be sure to let it cool down before starting the repair work.
Page 170 4.10 CPU Cooling Module and Fan 4 Replacement Procedures M2 5x5 white flat head screw CN501 Tape Figure 4-17 Removing the fan M2x3 white flat head screw CPU cooling module bracket CPU cooling module secure screw CPU cooling module Figure 4-18 Removing the CPU cooling module 4-35 Satellite L300D / L305D/Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual...
Page 171 4 Replacement Procedures 4.10 CPU Cooling Module and Fan Figure 4-19 Applying silicon grease Figure 4-20 Replace new thermal pad into correct position. Figure 4-21 Tear down the tape. 4-36 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual...
Page 172: Installing The Cpu Cooling Module And Fan
4.10 CPU Cooling Module and Fan 4 Replacement Procedures Installing the CPU Cooling Module and Fan Install the cooling Module according to the following procedures and Figures 4-17, 4-18, 4- 19, 4-20 and 4-21. CAUTION: When installing the cooling module, keep the following in mind: 1.
Page 173: Cpu
4 Replacement Procedures 4.11 CPU 4.11 CPU Removing the CPU CAUTION: When removing the CPU, keep the following in mind: The CPU can become very hot during operation. Be sure to let it cool down before starting repair work. Remove the CPU according to the following procedures and Figures 4-22, 4-23 and 4-24. NOTE: FOXCONN CPU socket will be 180 degrees to the right.
Page 174: Installing The Cpu
4.11 CPU 4 Replacement Procedures Installing the CPU Install the CPU according to the following procedures and Figures 4-23, 4-24. 1. Check that the triangle on the cam is in the unlock position. 2. Attach the CPU to the correct position in the CPU socket. Align the CPU with the CPU socket by using the triangle as a guide.
Page 175 4 Replacement Procedures 4.11 CPU 3. Secure the CPU by rotating the cam 120 degrees to the right with a flat-blade screwdriver. NOTE: FOXCONN CPU socket will be 180 degrees to the left. OPEN CLOSED CLOSED OPEN OPEN CLOSED Figure 4-24 Securing the CPU 4-40 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual...
Page 176: Display Mask
4.12 Display Mask 4 Replacement Procedures 4.12 Display Mask Removing the Display Mask Remove the display mask according to the following procedures and Figure 4-25. 1. Remove the following 4 seals on the display module in that order: - Two black seals on the bottom - Two black seals on the top 2.
Page 177 4 Replacement Procedures 4.12 Display Mask Installing the Display Mask Install the display mask according to the following procedures and Figure 4-25. 1. Seat the display mask in the correct position and secure the following 21 latches, in that order: - four top latches - Five latches on each of the left and right sides - Seven bottom latches...
Page 178: Fl Inverter Board
4.13 FL Inverter Board 4 Replacement Procedures 4.13 FL Inverter Board Removing the FL Inverter Board Remove the FL inverter board according to the following procedures and Figures 4-26. 1. Remove one M2.5x5 black flat head screw. M2 5x5 black flat head screw FL inverter board LCD FL cable HV cable...
Page 179: Installing The Fl Inverter Board
4 Replacement Procedures 4.13 FL Inverter Board Installing the FL Inverter Board Install the FL inverter board according to the following procedures and Figures 4-26. 1. Connect the LCD/FL cable to LCD/FL connector, and connect the HV cable to the HV connector.
Page 180: Removing The Lcd Module
4.14 LCD Module 4 Replacement Procedures 4.14 LCD Module NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module. NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or regulations.
Page 181 4 Replacement Procedures 4.14 LCD Module Left LCD bracket M2x3 black flat head screw LCD module Right LCD bracket M2x3 black flat head screw M2 5x5 black flat head screw Figure 4-27 Removing the LCD module and screws 6. Remove the tape and LCD/FL cable connector. Then disconnect the LCD/FL cable. LCD LF cable LCD module Figure 4-28 Removing the LCD module...
Page 182: Installing The Lcd Module
4.14 LCD Module 4 Replacement Procedures Installing the LCD Module NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the module. Install the LCD module according to the following procedures and Figures 4-27, 4-28. 1. Turn the LCD upside down. 2.
Page 183: Ccd Board And Mic
4 Replacement Procedures 4.15 CCD Board and MIC 4.15 CCD Board and MIC Removing the CCD Board and MIC Remove the FL inverter board according to the following procedures and Figure 4-29. 1. Remove the CCD module with CCD cable from display rear cover. 2.
Page 184 4.15 CCD Board and MIC 4 Replacement Procedures Installing the CCD Board and MIC Install the FL inverter board according to the following procedures and Figure 4-29. 1. Connect the CCD module cable to CCD module connector. 2. Seat the CCD module, MIC in the correct position. 4-49 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual...
Page 185 4 Replacement Procedures 4.16 Speaker 4.16 Speakers Removing the Speakers Remove the Speakers according to the following procedures and Figure 4-30. 1. Remove two M2x3 black flat head screw securing the left speaker. 2. Remove two M2x3 black flat head screws securing the right speaker. 3.
Page 186: Touch Pad And Button Board
4.17 Touch Pad and Button Board 4 Replacement Procedures 4.17 Touch Pad and Button Board Removing the Touch Pad and Button Board Remove the touch pad and button board according to the following procedures and Figure 4- 1. Disconnect the touch pad flat cables from CN5000 on the button board and touch pad.
Page 187 4 Replacement Procedures 4.17 Touch Pad and Button Board Installing the Touch Pad and Button Board Install the touch pad and button board according to the following procedures and Figure 4-31. 1. Seat the touch pad, touch pad bracket in the correct position and secure it with the eight M2x3 black flat head screws.
Page 188 4.18 USB Cable, CRT Cable, Power Button Board, 4 Replacement Procedures AC-IN cable and RJ11 Cable 4.18 USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable Removing USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable Remove the USB cable, CRT cable, Power Button board, AC-IN cable and RJ11 cable according to the following procedures and Figure 4-32.
Page 189 4 Replacement Procedures 4.18 USB Cable, CRT Cable, Power Button Board, AC- IN cable and RJ11 cable Installing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable Install the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable to the following procedures and Figure 4-32.
Page 190 6000 1 Appendices...
Page 191 Appendices Appendix Contents Appendix A Handling the LCD Module ................A-1 Appendix B Board Layout....................B-1 System Board Front View..................B-1 System Board Back View ..................B-2 Appendix C Pin Assignments...........Error! Bookmark not defined. Power Board Connector (4-Pin)... Error! Bookmark not defined. Switch Board Connector (12-Pin)..
Page 192 Appendices C.17 CN500 Battery Pack Connector (9-Pin) ... Error! Bookmark not defined. C.18 CN501 FAN Connector (3-Pin)......Error! Bookmark not defined. C.19 CN502 DDR2 DIMM0 Connector (200-Pin) ... Error! Bookmark not defined. C.20 CN503 DDR2 DIMM1 Connector (200-Pin) ... Error! Bookmark not defined. C.21 CN505 ODD Connector (50-Pin) .....
Page 193: Appendix A Handling The Lcd Module
Apx. A Handling the LCD Module Appendices Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assembly or disassembly. Observe the following precautions when handling the LCD module: 1.
Page 194 Appendices Apx. A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent.
Page 195 Apx. A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge.
Page 196 Appendices Apx. A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. A-4 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 197 Apx. A Handling the LCD Module Appendices 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization.
Page 198: Appendix B Board Layout
Apx. B Board Layout Appendices Appendix B Appendix B Board Layout System Board Front View Figure B-1 Board Layout (Front) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual B-1...
Page 199 Appendices Apx. B Board Layout System Board Back View Figure B-2 Board Layout (Back) B-2 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 200 Appendices Apx. C Pin Assignments Appendix C.......................... C-2 Power Board Connector (4-Pin)............C-2 Switch Board Connector (12-Pin)............C-2 AC-In Cable Connector (4-Pin) ............C-2 CRT Cable Connector (14-Pin)............C-2 LCD/FL Inverter Cable Connector (40-Pin) ........C-3 Modem Module Connector (12-Pin)..........C-3 CCD Camera Cable Connector (5-Pin)..........
Page 201: Cn1 Power Board Connector (4-Pin
Appendices Apx. C Pin Assignments Appendix C Appendix C Pin Assignments System Board Power Board Connector (4-Pin) Switch Board Connector (12-Pin) AC-In Cable Connector (4-Pin) CRT Cable Connector (14-Pin) C-2 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 202: Cn5 Lcd/Fl Inverter Cable Connector (40-Pin
Appendices Apx. C Pin Assignments LCD/FL Inverter Cable Connector (40-Pin) Modem Module Connector (12-Pin) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-3...
Page 203: Cn7 Ccd Camera Cable Connector (5-Pin
Appendices Apx. C Pin Assignments CCD Camera Cable Connector (5-Pin) Touch Pad Board Cable Connector (12-Pin) CN10 Internal Speaker Cable Connector (6-Pin) C-4 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 204: Cn11 Wireless Lan Module Connector (52-Pin
Appendices Apx. C Pin Assignments C.10 CN11 Wireless LAN Module Connector (52-Pin) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-5...
Page 205: Cn12 Internal Keyboard Cable Connector (34-Pin
Appendices Apx. C Pin Assignments C.11 CN12 Internal Keyboard Cable Connector (34-Pin) C.12 CN13 Express Card Module Connector (26-Pin) C-6 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 206: Cn14 Internal Mic Phone Cable Connector (2-Pin
Appendices Apx. C Pin Assignments C.13 CN14 Internal MIC Phone Cable Connector (2-Pin) C.14 CN15 USB Port2 Board Cable Connector (5-Pin) C.15 CN16 PCMCIA Slot Module Connector (68-Pin) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-7...
Page 207: Cn17 Hdd Connector (22-Pin
Appendices Apx. C Pin Assignments C.16 CN17 HDD Connector (22-Pin) C-8 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 208: Cn500 Battery Pack Connector (9-Pin
Appendices Apx. C Pin Assignments C.17 CN500 Battery Pack Connector (9-Pin) C.18 CN501 FAN Connector (3-Pin) C.19 CN502 DDR2 DIMM0 Connector (200-Pin) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-9...
Page 209 Appendices Apx. C Pin Assignments C-10 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 210 Appendices Apx. C Pin Assignments Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-11...
Page 211: Cn503 Ddr2 Dimm1 Connector (200-Pin
Appendices Apx. C Pin Assignments C.20 CN503 DDR2 DIMM1 Connector (200-Pin) C-12 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 212 Appendices Apx. C Pin Assignments Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-13...
Page 213 Appendices Apx. C Pin Assignments C-14 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 214: Cn505 Odd Connector (50-Pin
Appendices Apx. C Pin Assignments C.21 CN505 ODD Connector (50-Pin) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-15...
Page 215: Cn506 Usb Port0 & Port1 Connector (8-Pin
Appendices Apx. C Pin Assignments C.22 CN506 USB Port0 & Port1 Connector (8-Pin) C.23 CN507 HDMI Connector (19-Pin) C-16 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 216: Cn508 Bridge Media Slot Connector (21-Pin
Appendices Apx. C Pin Assignments C.24 CN508 Bridge Media Slot Connector (21-Pin) C.25 CN510 Broadcom Decoder Connector (52-Pin) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-17...
Page 217: Jack500 Rj45 Lan Connector (12-Pin
Appendices Apx. C Pin Assignments C.26 JACK500 RJ45 LAN Connector (12-Pin) C.27 JACK501 External MIC Connector (6-Pin) C-18 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 218: Jack502 Head Phone Connector (6-Pin
Appendices Apx. C Pin Assignments C.28 JACK502 Head Phone Connector (6-Pin) USB Port2 Board C.29 CN4000 USB Port2 Connector (4-Pin) Touch Pad Board C.30 CN5000 Touch Pad Module Connector (12-Pin) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-19...
Page 219: Cn5001 Touch Pad Board Cable Connector (12-Pin
Appendices Apx. C Pin Assignments C.31 CN5001 Touch Pad Board Cable Connector (12-Pin) C-20 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 220 Keyboard Scan/Character Codes Appendices Apx. D Keyboard Scan/Character Codes Appendix D Keyboard Scan/Character Codes Table D-1 Scan Codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Note Keytop Make Break Make Break ‘ ~ 7 & BkSp Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual D-1...
Page 221 Appendices Keyboard Scan/Character Codes Table D-1 Scan Codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Note Keytop Make Break Make Break Caps Lock ‘ “ Enter Shift (L) No.102 , < . > ¡ Shift (R) D-2 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 222 Keyboard Scan/Character Codes Appendices Table D-1 Scan Codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Note Keytop Make Break Make Break Ctrl Alt (L) Space ALT (R) ← Home ↑ ↓ PgUp PgDn → Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual D-3...
Page 223 Appendices Keyboard Scan/Character Codes Table D-1 Scan Codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Note Keytop Make Break Make Break PrintSc *6 Pause — — — — Kat/Hir Notes: 1. * Scan codes differ by mode. 2.
Page 224 Keyboard Scan/Character Codes Appendices Table D-2 Scan Codes with left Shift key Code set 1 Code set 2 Make Break Make Break ← Home ↑ ↓ PgUp PgDn → Note : The table above shows scan codes with the left Shift key. In combination with the right Shift key, scan codes are changed as listed below: With left Shift With right Shift...
Page 225 Appendices Keyboard Scan/Character Codes Table D-3 Scan Codes in Numlock mode Code set 1 Code set 2 Make Break Make Break ← Home ↑ ↓ PgUp PgDn → Table D-4 Scan Codes with Fn key Code set 1 Code set 2 Keytop Make Break...
Page 226 Keyboard Scan/Character Codes Appendices Table D-5 Scan Codes in overlay mode Keytop Code set 1 Code set 2 Make Break Make Break (–) Table D-6 No.124 key scan code Shift Code set 1 Code set 2 Make Break Make Break Prt Sc Common Ctrl +...
Page 227 Appendices Keyboard Scan/Character Codes Table D-7 No.126 key scan code Shift Code set 1 Code set 2 Make Make Pause Common* E1 1D E1 F0 Ctrl* E0 46 7E E0 F0 *: This key generates only make codes. D-8 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 228: Appendix E Key Layout
Apx. E Key Layout Appendices Apx. E Key Layout Appendix E Key Layout United States (US) Keyboard Figure E-1 US keyboard Japan (JP) Keyboard Figure E-2 JP keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-1...
Page 229 Appendices Apx. E Key Layout Spanish (SP) Keyboard Figure E-3 SP keyboard Korean (KR) Keyboard Figure E-4 KR keyboard E-2 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 230 Apx. E Key Layout Appendices Canadian Bilingual (QB) Canadian Bilingual (QB) Canadian Bilingual (QB) Canadian Bilingual (QB) Keyboard Figure E-5 QB keyboard French (FR) Keyboard Figure E-6 FR keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-3...
Page 231 Appendices Apx. E Key Layout German (GR) Keyboard Figure E-7 GR keyboard Italian (IT) Keyboard Figure E-8 IT keyboard E-4 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 232 Apx. E Key Layout Appendices Taiwan (TC) Keyboard Figure E-9 TC keyboard E.10 Portuguese (PT) Keyboard Figure E-10 PT keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-5...
Page 233 Appendices Apx. E Key Layout E.11 DU, UE, US International (USE) Keyboard Figure E-11 USE keyboard E.12 Arabic (AR) Keyboard Figure E-12 AR keyboard E-6 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 234 Apx. E Key Layout Appendices E.13 Belgian (BE) Keyboard Figure E-13 BE keyboard E.14 Russian (RU) Keyboard Figure E-14 RU keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-7...
Page 235 Appendices Apx. E Key Layout E.15 Swiss/Switzerland (SL) Keyboard Figure E-15 SL keyboard E.16 Swedish (SW) Keyboard Figure E-16 SW keyboard E-8 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 236 Apx. E Key Layout Appendices E.17 Norwegian (NO) Keyboard Figure E-17 NO keyboard E.18 Danish (DK) Keyboard Figure E-18 DK keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-9...
Page 237 Appendices Apx. E Key Layout E.19 Turkey (TR) Keyboard Figure E-19 TR keyboard E.20 Greek (GK) Keyboard Figure E-20 GK keyboard E-10 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 238 Apx. E Key Layout Appendices E.21 Canadian Multinational (CM) Keyboard Figure E-21 CM keyboard E.22 Herbrew (HE) Keyboard Figure E-22 HE keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-11...
Page 239 Appendices Apx. E Key Layout E.23 Czech (CZ) Keyboard Figure E-23 CZ keyboard E.24 Scandinavian (N5) Keyboard Figure E-24 N5 keyboard E-12 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 240 Apx. E Key Layout Appendices E.25 Hungary (HU) Keyboard Figure E-25 HU keyboard E.26 Slovakian (SK) Keyboard Figure E-26 SK keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-13...
Page 241 Appendices Apx. E Key Layout E.27 Yugoslavia (YU) Keyboard Figure E-27 YU keyboard E.28 Thai (TH) Keyboard Figure E-28 TH keyboard E-14 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
Page 242 Apx. E Key Layout Appendices E.29 United Kingdom (EN) Keyboard Figure E-29 EN keyboard E.30 Turkish F (TF) Keyboard Figure E-30 TF keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-15...
Page 243: Appendix F Bios Rewrite Procedures
Apx. F BIOS Rewrite Procedures Appendices Appendix G Appendix F BIOS Rewrite Procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool: BIOS/EC/KBC rewriting disk for the computer that has renewed BIOS data. Rewriting the BIOS 1.
Page 244 Apx. G EC/KBC Rewrite Procedures Appendices Appendix H Appendix G EC/KBC Rewrite Procedures This Appendix explains how to rewrite the EC/KBC system program when you update the EC/KBC system. Tools To rewrite the EC/KBC, you need the following tool: BIOS/EC/KBC rewriting disk for the computer Rewriting the EC/KBC 1.

This manual is also suitable for:

Satellite l300d Satellite l305d Satellite pro l300d Equium l300d Satego l300d

Toshiba Satellite L300 Maintenance Manual

Table of Contents

Table of Contents

Troubleshooting

Chapter  Diagnostic Programs

Table of Contents

B.2 System Board Back View

Quick Links

Chapters

Related Manuals for Toshiba Satellite L300

Summary of Contents for Toshiba Satellite L300

This manual is also suitable for:

Table of Contents

Chapter Diagnostic Programs