Daily Operations—Sound And Other Adjustments; Additional Information; Learning More About This System - JVC HX-D7 Instructions Manual
Compact component system
Hide thumbs
Also See for HX-D7:
- Instructions manual (98 pages) ,
- Service manual (45 pages) ,
- Instructions manual (98 pages)
Table of Contents
Advertisement
Available languages
Available languages
Learning More about This System
Before Operating the System
Playable Disc Types:
• About audio format
– Linear PCM: Uncompressed digital audio, the same
format used for CDs and most studio masters.
– Dolby Digital: Compressed digital audio, developed by
Dolby Laboratories, which enables multi-channel
encode to create the realistic surround sound.
– DTS (Digital Theater Systems): Compressed digital
audio, developed by Digital Theater Systems, Inc., which
enables multi-channel like Dolby Digital. As the
compression ratio is lower than for Dolby Digital, it
provides wider dynamic range and better separation.
Daily Operations—Playback
Listening to the Radio:
• If you store a new station into an occupied preset number,
the previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
Playing Back a Disc:
• On some DVD, SVCD, or VCD discs, the actual operations
may be different from what is explained in this manual, due
to the programming and disc structure; such differences are
not a malfunction of this System.
• For DVD-VR playback...
– This unit cannot play back DVD-VR disc with CPRM
(Content Protection for Recordable Media).
– When making a disc, use UDF-Bridge format.
– For details about DVD-VR format and playlist, refer to
the manual of the recording equipment.
– You cannot use reverse slow motion, Program Play, and
Random Play.
• For MP3/WMA/JPEG playback...
– MP3/WMA/JPEG discs are required a longer readout
time than regular CDs. (It depends on the complexity of
the group/file configuration.)
– Some MP3/WMA/JPEG files cannot be played back and
will be skipped. This results from their recording
processes and conditions.
– When making MP3/WMA/JPEG discs, use ISO 9660
Level 1 or Level 2 for the disc format.
– This system can play back MP3/WMA/JPEG files with
the extension code <.mp3>, <.wma> or <.jpg>
(regardless of the letter case—upper/lower).
– It is recommended that you make each MP3/WMA file at
a sampling rate of 44.1 kHz and at bit rate of 128 kbps.
This System cannot play back files made at bit rate of less
than 64 kbps.
Additional Information
(see page 3)
(see pages 10 to 15)
Playing Back from the PC:
• Check if your PC equipped with the CD-ROM drive is
®
running on Windows
98*, Windows
®
Me*, Windows
2000*, or Windows
CD-ROM.
• DO NOT turn off the System or disconnect the USB cable
while installing the drivers or until your PC has recognized
the System.
• Use a full speed USB cable (version 1.1).
• If your PC does not recognize the System, disconnect the
USB cable and connect it again. If this does not work,
restart Windows.
• The drivers installed can be recognized only when the USB
cable is connected between the System and your PC.
• The sound may not be played back correctly—interrupted
or degraded—due to your PC settings or PC specifications.
®
®
*Microsoft
, Windows
98, Windows
®
Me, Windows
2000 and Windows
trademarks of Microsoft corporation.
Playing Back from Other External Equipment:
• When enjoying a video game with your game machine
connected to this System, connect this System and your
TV/monitor with the composite video cable.
Daily Operations—Sound and Other
Adjustments
(see pages 16 to 19)
Adjusting the Volume:
• Be sure to turn down the volume before connecting or
putting the headphones.
• When you turn off the System with the volume level set to
"VOL 16" or higher, the volume level is reset to "VOL 15"
next time you turn on the System.
Selecting the Sound Modes:
• Sound Modes do not take effect while game is selected as
the source.
Selecting 3D Phonic Mode:
• 3D Phonic function also affects the sound through the
headphones.
• 3D Phonic setting is also applied to the optical digital
output signals through the DIGITAL OUTPUT
(OPTICAL) terminal.
Changing the Picture Tone:
• If no operation is done for about 10 seconds, the VFP
setting screen disappears.
Setting the Clock:
• "– –:– –" will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Turning Off the Power Automatically:
• If you turn off the System, Sleep Timer is canceled.
®
®
98SE*, Windows
®
XP* and prepare its
®
®
98SE, Windows
®
XP are registered
40
Advertisement
Chapters
Table of Contents
