Page 1 ® Satellite Pro M200 Series User’s Guide If you need assistance: Toshiba’s Support Web site pcsupport.toshiba.com Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong” on page 167 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ®...
Page 4: Fcc Requirements
This device must accept any interference received, including interference that may cause undesired operation. Contact either: Toshiba’s Support Web site at pcsupport.toshiba.com. Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5 If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Instructions for IC CS-03 Certified Equipment NOTICE: The Industry Canada label identifies certified equipment.
Page 7: Wireless Interoperability
Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined and approved by the Institute of Electrical and Electronics Engineers.
Page 8: Regulatory Information
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 9: Eu Declaration Of Conformity
NOTE The above Caution information applies to products that operate with an 802.11a device. EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: Supplementary *The product complies with the Information: requirements of the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and/or the R&TTE Directive...
Page 10 VCCI Class B Information Modem Warning Notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
Page 11: Device Authorization
2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
Page 12: Radio Approvals For Wireless Devices
The Name of the radio equipment: refer to the equipment label provided on the computer JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS EQUIPMENT Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: Do not disassemble or modify the device. Do not install the embedded wireless module into other device.
Page 13 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 14 802.11a (5 GHz) Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community 5150-5250 MHz 5250-5350 MHz...
Page 15 This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 16 802.11a (5 GHz) Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland Turbo Mode (5 GHz) Canada ® Approved Countries/Regions for use for the Intel PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 17 Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 19 Approved Countries/Regions for use (Bluetooth wireless technology) ® Bluetooth Card from Toshiba equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Argentina...
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 23 (Sample shown below. Location of the label and manufacturing information may vary.) Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 24 EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL.
Page 25 Card is a trademark of Fuji Photo Film, Co., Ltd. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ......39 Precautions............39 Important information on your computer’s cooling fan ..........40 Setting up your computer ........41 Setting up your software........41 Registering your computer with Toshiba ....42 Adding optional external devices......42 Connecting to a power source ........43 Charging the main battery........45...
Page 27 Contents Using the computer for the first time ......46 Opening the display panel .........46 Your computer’s features and specifications ..47 Turning on the power ........47 Adding memory (optional) ........48 Installing a memory module ......49 Removing a memory module......54 Checking total memory ........55 Hard Drive Recovery Utilities ........55 Creating Recovery CDs/DVDs ......56 Hard Disk Drive Recovery options ....57...
Page 28 Inserting an optical disc........93 Playing an audio CD..........95 Playing optical media ........96 Recording optical media ........96 Removing a disc with the computer on.....97 Removing a disc with the computer off ....97 Caring for optical discs ........98 Toshiba’s online resources ........98...
Page 29 Contents Chapter 3: Mobile Computing........... 99 Toshiba’s energy-saver design........99 Running the computer on battery power ....99 Battery Notice ..........100 Power management ........101 Using additional batteries .......101 Charging batteries..........101 Charging the main battery.......102 Charging the RTC battery........102 Monitoring main battery power......103 Determining remaining battery power.....105...
Page 30 Deleting a user password........142 Using a user password ........142 Deleting a user password........143 TOSHIBA PC Diagnostic Tool Utility......144 ® Fn-esse ..............145 ® Starting Fn-esse ...........145 TOSHIBA SD™ Memory Card Format Utility ..146 TOSHIBA Power Saver ..........147 Preset Power Profiles ........148...
Page 31 Quickly creating a new power profile ....148 Customizing a power profile ......148 Mouse Utility ............149 TOSHIBA Hardware Setup........150 TOSHIBA Zooming Utility........152 TOSHIBA Button Controls ........153 CD/DVD Drive Acoustic Silencer ......154 TOSHIBA Accessibility ..........155 Fingerprint Authentication Utility......156 Fingerprint utility limitations ......156 Fingerprint Enrollment ........156...
Page 32 Develop good computing habits ......193 Data and system configuration backup in the ® Windows operating system.....194 If you need further assistance.......199 Before you contact Toshiba ......199 Contacting Toshiba .........199 Other Toshiba Internet Web sites......200 Toshiba’s worldwide offices........200 Appendix A: Hot Keys..............202 Volume Mute ............202 Password security ..........203...
Page 33 Contents ® Appendix C: Using ConfigFree with your Toshiba Computer..........210 Getting Started............211 ® Starting ConfigFree ........211 ® ConfigFree Utilities..........213 Connectivity Doctor ........213 Search for Wireless Devices ......215 Profile Settings ..........220 ® ConfigFree SUMMIT........222 Quick Connect..........226 Using the Automatic Switch........228 Semi-Automatic Switch Feature ......229...
Page 34: Introduction
Introduction Welcome to the world of powerful, portable, multimedia computing. With your Toshiba notebook computer, your work and entertainment can accompany you wherever you go. NOTE This notebook is compatible with European Union Directive 2002/ 95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE.
Page 35: This Guide
Toshiba’ s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Page 36: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 37: Other Documentation
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page...
Page 38: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 39: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 40: Important Information On Your Computer's Cooling Fan
Getting Started Selecting a place to work Never turn off the computer if a drive light indicates a drive is active. Turning off the computer while it is reading from or writing to a disk/disc or flash media may damage the disk/disc or flash media, the drive, or both.
Page 41: Setting Up Your Computer
Getting Started Setting up your computer Setting up your computer TECHNICAL NOTE: You must complete all setup steps up to and including “Setting up your software” on page 41 before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC Cards.
Page 42: Registering Your Computer With Toshiba
If you decide not to register at that time, you can either double-click the Register with Toshiba icon on your desktop or go to the Toshiba Web site at www.register.toshiba.com at a later time. Failure to complete Product Registration will not diminish Customer rights under the Toshiba limited Warranty.
Page 43: Connecting To A Power Source
TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 44 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adaptor. (Sample Illustration) Connecting the power cord/cable to the AC adaptor Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 45: Charging The Main Battery
Getting Started Charging the main battery The computer’s main battery light gives you an indication of the main battery’s current charge: Glows amber while the main battery is being charged (AC adaptor connected) Glows blue when the main battery is fully charged Is unlit when the main battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet...
Page 46: Using The Computer For The First Time
Getting Started Using the computer for the first time NOTE Battery life and charge time may vary depending on the applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Facing the front of the computer, locate the center of the display panel.
Page 47: Your Computer's Features And Specifications
Getting Started Using the computer for the first time Small bright dots may appear on your screen display when you turn on your computer. Your display contains an extremely large number of thin-film transistors (TFT) and is manufactured using high- precision technology.
Page 48: Adding Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page...
Page 49: Installing A Memory Module
Getting Started Adding memory (optional) Installing a memory module Memory modules can be installed in the memory module slots on the base of the computer. You will need a small Phillips screwdriver for this procedure. If the computer has been running recently, the memory module may be hot.
Page 50 Getting Started Adding memory (optional) Remove the main battery. For information on removing the main battery, see “Removing the battery from the computer” on page 109. Close the display panel and turn the computer upside down to locate the memory module slot cover. Memory module slot cover Front of computer (Sample Illustration) Locating the memory module slot cover...
Page 51 Getting Started Adding memory (optional) Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touching the connector on the memory module or on the computer.
Page 52 Getting Started Adding memory (optional) Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer). (Sample Illustration) Inserting the memory module into the socket Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket.
Page 53 Getting Started Adding memory (optional) Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. Slot B Slot A (Sample Illustration) Inserting the memory module into the slot NOTE For this model Slot A is the bottom slot.
Page 54: Removing A Memory Module
Getting Started Adding memory (optional) Removing a memory module If you need to remove a memory module: Complete steps 1–8 “Installing a memory module” on page 49 to shut down the computer and open the memory module slot cover. Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module.
Page 55: Checking Total Memory
Getting Started Hard Drive Recovery Utilities Replace the memory module slot cover and secure it using the screw. Re-insert the main battery. For more information on inserting the main battery, see “Inserting a charged battery” on page 110. Turn the computer right side up. Reconnect the cables.
Page 56: Creating Recovery Cds/Dvds
The system will prompt you to insert the appropriate number of blank CDs or DVDs to copy the Hard Drive Recovery Utilities. If your optical disc drive is not writable, contact Toshiba Customer Support to obtain the Recovery media for your system.
Page 57: Hard Disk Drive Recovery Options
Getting Started Hard Drive Recovery Utilities Select CD or DVD (to create Recovery media on CDs or DVDs). (Sample Image) Recovery Disc Creator screen Select the items you want to copy by clicking the check box next to the item’s Name—recovery files, applications (original bundled drivers and applications), or both the recovery files and applications.
Page 58 (zero) key on your keyboard while powering on the computer. When the computer powers on, the Toshiba Recovery Wizard screen displays. (Sample Image) Toshiba Recovery Wizard screen Select one of the options, and then click Next. The options are: Recovery of Factory Default Software...
Page 59 Be sure to save your work to external media first. On the Toshiba Recovery Wizard screen, select Recovery of Factory Default Software, and then click Next. The Recovery of Factory Default Software screen appears.
Page 60 The Recovery Wizard allows you to delete all data and partitions from the hard disk. To delete the data and partitions from your hard disk: On the Toshiba Recovery Wizard screen, select Erase the hard disk, and then click Next. The next screen lists the two methods you can choose: Delete all data and partitions from the hard disk—This...
Page 61 To recover only your C: drive: On the Toshiba Recovery Wizard Screen, select Recovery of Factory Default Software, and then click Next. Select Recover without changing the hard drive partitions.
Page 62: Hard Disk Drive Recovery Using The Recovery Media
When the initial screen displays, press The boot menu appears. Using the arrow keys, select the CD/DVD option and press Enter . The system will boot up to the Toshiba Recovery Wizard screen. Please refer to “Hard Disk Drive Recovery options” on page 57, to explain the available recovery options.
Page 63: Installing Drivers And Applications
Highlight the hard disk drive in the Volume list to display its status in the lower portion of the screen. Installing drivers and applications The Toshiba Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Double-click the Toshiba Application Installer icon on the ®...
Page 64: Scrolling With The Touchpad
Getting Started Using the TouchPad™ NOTE Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction. Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons.
Page 65: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in display, but you can also connect an external display device to an available video port, as follows: An external monitor or projector via the RGB (monitor) port A TV, VCR, or DVD recorder via the S-video (TV-out) port Before connecting an external monitor or video projector, configure your computer for the type of device you are connecting.
Page 66: Adjusting The Quality Of The External Display
Getting Started Using external display devices While holding down , press repeatedly until the setting you want takes effect. Briefly pause each time you press the key to allow time for the display to change. This hot key cycles through the settings in the following order (only the first option is available when you do not have an external monitor attached): LCD—Internal display only...
Page 67: Using An External Keyboard
Getting Started Using an external keyboard TECHNICAL NOTE: To use one of the simultaneous modes, you must set the resolution of the internal display panel to match the resolution of the external display device. The external display device must support a resolution of 800 x 600 or higher. Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer.
Page 68: Setting Up A Printer
Getting Started Connecting a printer To connect a printer to your computer: Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports. Plug the printer’s power cable into a live AC outlet. Setting up a printer NOTE Some printers require a specific installation process.
Page 69: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5-inch diskettes. (Sample Illustration) Optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports.
Page 70: Options For Turning Off The Computer
Getting Started Turning off the computer Options for turning off the computer Depending on the operating system installed, you have more than one option available for turning off the computer: Turn Off or Shut Down, Hibernate, and Standby. Each option has its advantages. Turn Off or Shut Down Factors to consider when choosing either Turn Off or Shut Down: Use the Turn Off command if you are not connected to a...
Page 71 Getting Started Turning off the computer more time and consumes more main battery power to start up than when restarting from Standby. When starting up again, the computer returns to the state in which you left it, including all open programs and files you were using.
Page 72: Using The Turn Off Computer Or Shut Down Commands
Getting Started Turning off the computer Using the Turn Off Computer or Shut Down commands Use the following steps to turn off your computer. Turn Off Follow these steps to turn off the computer when you are not connected to a domain server: Click Start, and then Turn off computer.
Page 73 Turning off the computer more quickly You can also turn off the computer by pressing the power button. To use this method, you first need to activate it using Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance.
Page 74: Using And Configuring Hibernation Mode
Hibernation mode. To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click the Setup Action tab.
Page 75 Click Apply. Click OK. NOTE For more information about the Power Saver utility, see “TOSHIBA Power Saver” on page 147. Once the computer is configured, you can place it into Hibernation mode by either pressing the power button or closing the display panel, depending on the Hibernation options set.
Page 76: Using And Configuring Standby Mode
To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. Click the TOSHIBA Power Saver icon. Click the Setup Action tab. Select Standby for the options you want. NOTE...
Page 77: Closing The Display Panel
Click Apply. Click OK. NOTE For more information about the Power Saver utility, see “TOSHIBA Power Saver” on page 147. Once the computer is configured, you can place it into Standby mode by either pressing the power button or closing the display panel, depending on the Standby options set.
Page 78: Caring For Your Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable...
Page 79 Getting Started Caring for your computer To secure the computer: Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Pass the locking end through the loop. Insert the cable’s locking end into the security lock slot on your computer, then engage the locking device.
Page 80: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 81 Learning the Basics Computing tips Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 82: Using The Keyboard
Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control keys, ® function keys, and special Windows keys, providing all the functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The space bar creates a space character instead of just passing over an area of the page.
Page 83: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys Ctrl , and keys do different things depending on the program you are using. For more information, see your program documentation. Function keys The function keys (not to be confused with the key) are the 12 keys at the top of the keyboard.
Page 84: Overlay Keys
Learning the Basics Using the keyboard Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard.
Page 85: Starting A Program
Learning the Basics Starting a program Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find ® the file, use My Computer or Windows Explorer.
Page 86: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program ® This example opens WordPad using Windows Explorer. Click Start, and then All Programs. Click Accessories. Click Windows Explorer. Click My Computer to expand the window. In the left part of the window, click the line that ends in “(C:).” In the left part of the window, under the C: icon, double-click the folder containing the program, in this case Program Files.
Page 87: Saving Your Work
Learning the Basics Saving your work In the Run dialog box: If you know the program’s location, type the command ® line. For a program in the Windows folder, type just the program name. Otherwise, type the full file path. For example, to access WordPad, type: then c:\Program Files\Windows NT\Accessories\wordpad.exe,...
Page 88 Learning the Basics Saving your work Saving files ® In your Windows -based application, click File, and then Save. If you are working with a document that already has a file name, this is all you need to do. If you created a new document, your program displays a Save As dialog box.
Page 89: Printing Your Work
Learning the Basics Printing your work File names ® The Windows operating system supports long file names that can contain up to 255 characters and can include spaces. Some applications do not support long file names and require file names limited to no more than eight characters.
Page 90: Backing Up Your Work
Learning the Basics Backing up your work ® In your Windows application, click File, and then Print. The program displays a Print dialog box. (Sample Image) Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print.
Page 91: Restoring Your Work
Learning the Basics Using the optical drive Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program. Look in the online Help or your operating system documentation for information on restoring files.
Page 92: Optical Drive Components
Learning the Basics Using the optical drive Optical drive components The optical drive is located on the side of the computer. Your optical drive may look like this: Drive in-use indicator light Eject button Manual eject hole (Sample Illustration) Optical drive Drive in-use indicator light—Indicates when the drive is in use.
Page 93: Media Control Buttons
Learning the Basics Using the optical drive Media control buttons The media control buttons located above the keyboard let you access the Internet when the computer is on and play audio CDs or DVD movies. Stop button Play/Pause button Previous track Media button button Internet browser...
Page 94 Learning the Basics Using the optical drive Grasp the tray and pull it fully open. (Sample Illustration) Drive tray fully extended Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for optical discs”...
Page 95: Playing An Audio Cd
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 96: Playing Optical Media
Depending on the configuration, your computer may come with an optical drive that allows you to: Play pre-recorded and recorded optical media Read/write data and multi-media files to recordable optical media. For more information regarding supported optical media formats please refer to your computer’s detailed specifications at pcsupport.toshiba.com.
Page 97: Removing A Disc With The Computer On
Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your Toshiba optical drive may not record on certain optical media that bear the applicable logo, or play back optical media recorded by other computers or optical media recorders.
Page 98: Caring For Optical Discs
Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 99: Chapter 3: Mobile Computing
Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba’s energy-saver design Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency.
Page 100: Battery Notice
This is normal for all batteries. To purchase a new battery pack, see the accessories information that shipped with your computer or visit the Toshiba Web site at accessories.toshiba.com. Use only batteries designed to work with your Toshiba notebook computer.
Page 101: Power Management
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 102: Charging The Main Battery
Mobile Computing Charging batteries Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: The recharging of the battery cannot occur when your computer is using all of the power provided by the AC adaptor to run applications, features, and devices.
Page 103: Monitoring Main Battery Power
Mobile Computing Monitoring main battery power NOTE The above error message may vary by computer model. The RTC battery does not charge while the computer is turned off even when the AC adaptor is charging the computer. The RTC battery charges when the computer is powered on.
Page 104 Mobile Computing Monitoring main battery power NOTE If the AC power light flashes amber during charging, either a battery pack is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the battery pack. “Changing the main battery”...
Page 105: Determining Remaining Battery Power
Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. Click the TOSHIBA Power Saver icon. The Power Saver Properties window appears. The remaining battery charge is indicated on the left side of the dialog box.
Page 106: Setting Battery Alarms
By using them, you can increase the length of time you can use the computer before you need to recharge the battery. Toshiba has combined these options into preset Power Profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance.
Page 107: Power Profiles
To do this: Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Saver. The TOSHIBA Power Saver Properties window appears. (Sample Image) TOSHIBA Power Saver Properties window Select an appropriate profile for your work environment or create your own custom profile.
Page 108: Using A Hot Key To Set The Power Profile
Mobile Computing Changing the main battery Using a hot key to set the Power Profile You may use a hot key to set the Power Profile. To set the Power Profile: Press simultaneously to display the Power Profile pop-up window. (Sample Image) Power Profile pop-up window While continuing to press , press...
Page 109: Removing The Battery From The Computer
Mobile Computing Changing the main battery TECHNICAL NOTE: To avoid losing any data, save your files and then either completely shut down your computer or put it into Hibernation mode before changing the main battery. Removing the battery from the computer To remove the battery: Save your work.
Page 110: Inserting A Charged Battery
Mobile Computing Changing the main battery Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately.
Page 111 Mobile Computing Changing the main battery If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position. (Sample Illustration) Inserting the battery Slide the battery release lock to the locked position.
Page 112: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all batteries.
Page 113: Maintaining Your Battery
Mobile Computing Taking care of your battery Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter. To fully discharge your battery pack: Periodically, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Page 114: Disposing Of Used Batteries
If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle™, a program of the Rechargeable Battery Recycling...
Page 115: Traveling Tips
Never leave your computer on a sunny ledge or in a place where it could get wet or covered in dust. Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs.
Page 116: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 117: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, System tray, and background pattern. Icons Start button Taskbar System tray ® (Sample Image) Windows operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 118 Exploring Your Computer’s Features Exploring the desktop NOTE If you place the cursor over an icon, a popup description of the file contents appears. Your desktop may contain other icons depending on your ® configuration. See Windows online Help for more specific information on each icon and how to use it.
Page 119: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Setting up for communications To connect to the Internet, or use an online service, you need: A browser or communications program An Internet Service Provider (ISP) or online service if you plan to use the Internet A way to connect to the ISP (for example modem/ ®...
Page 120: Connecting A Modem To A Telephone Line
Send a fax directly from your computer For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 121 Exploring Your Computer’s Features Setting up for communications Plug one end of a telephone cable (purchased separately) into the modem port on the side of the computer. (Sample Illustration) Connecting the telephone cable to the modem port Connect the other end to the RJ-11 wall jack. (Sample Illustration) Connecting to a wall jack NOTE Connect the built-in modem only to ordinary analog phone lines.
Page 122: An Overview Of Using The Internet
Exploring Your Computer’s Features An overview of using the Internet An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: The Internet The World Wide Web Internet Service Providers Connecting to the Internet Surfing the Internet...
Page 123: Connecting To The Internet
Exploring Your Computer’s Features An overview of using the Internet Connecting to the Internet To connect to the Internet, you need: A browser or communications program An Internet Service Provider (ISP) or online service if you plan to use the Internet A way to connect to the ISP (for example modem/ ®...
Page 124: Internet Features
Exploring Your Computer’s Features An overview of using the Internet Internet features The Internet offers many types of communication tools to help you perform many tasks. Internet email To send and receive email of your own, you need a mailbox on the Web or an email address.
Page 125: Exploring Audio Features
Exploring Your Computer’s Features Exploring audio features Exploring audio features You can use your computer to record sounds using an optional external microphone. You can listen to sound files or audio CDs using the built-in speakers, headphones, or external speakers. Recording sounds You may record sounds using an optional external microphone or other sound source to the microphone jack.
Page 126: Using External Speakers Or Headphones
Exploring Your Computer’s Features Using PC Cards NOTE The microphone on your computer might be set to Mute. To check this, click Start, All Programs, Accessories, Entertainment, and then Volume Control. Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers.
Page 127: Inserting A Pc Card
Exploring Your Computer’s Features Using PC Cards The PC Card slot supports hot swapping, which allows you to replace one PC Card with another while the computer is on. Inserting a PC Card Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before you insert it.
Page 128: Setting Up A Pc Card For Your Computer
PDAs, digital cameras, digital video camcorders, etc. The Bridge Media Adapter slot may also support other types of media. For a complete list of supported media, visit Toshiba’s Web site at accessories.toshiba.com. NOTE Do not use the Copy Disk function for this type of media. To copy data from one media to another, use the drag-and-drop feature of the ®...
Page 129: Inserting Memory Media
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Inserting memory media The following instructions apply to all types of supported media devices. Turn the media so that the contacts (metal areas) are face down. Push the media into the adapter until it locks in place. (Sample Illustration) Inserting memory media When inserting memory media, do not touch the metal contacts.
Page 130: Using The I.link ® Port
Exploring Your Computer’s Features ® Using the i.LINK port Do not remove memory media while data is being written or read. ® Even when the Windows message “copying...” disappears, writing to the media might still be in progress and your data could be destroyed.
Page 131: Chapter 5: Utilities
TOSHIBA Assist TOSHIBA Application Installer Supervisor password User password TOSHIBA PC Diagnostic Tool Utility Fn-esse® TOSHIBA SD™ Memory Card Format Utility TOSHIBA Power Saver Mouse Utility TOSHIBA Hardware Setup TOSHIBA Zooming Utility TOSHIBA Button Controls CD/DVD Drive Acoustic Silencer...
Page 132: Toshiba Assist
Utilities TOSHIBA Assist TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: Double-click the TOSHIBA Assist shortcut icon on the desktop.
Page 133: Connect
Utilities TOSHIBA Assist Connect The features available in this category are: ® ConfigFree Connectivity Doctor ® Start Bluetooth ® Bluetooth Settings ® Bluetooth Local COM Settings (Sample Image) TOSHIBA Assist window – Connect tab...
Page 134: Secure
Utilities TOSHIBA Assist Secure The features available in this category are: Supervisor password User password (Sample Image) TOSHIBA Assist window – Secure tab...
Page 135: Protect & Fix
Utilities TOSHIBA Assist Protect & Fix The features available in this category are: TOSHIBA PC Diagnostic Tool Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab...
Page 136: Optimize
Optimize The features available in this category are: Hotkey assignment using Fn-esse® TOSHIBA Power Saver Mouse Utility TOSHIBA Hardware Setup TOSHIBA Zooming Utility CD/DVD Drive Acoustic Silencer TOSHIBA Accessibility TOSHIBA Button Controls (Sample Image) TOSHIBA Assist window – Optimize tab...
Page 137: Toshiba Application Installer
Utilities TOSHIBA Application Installer TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Double-click the TOSHIBA Application Installer icon on the ®...
Page 138: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: An instant password—Secures your open programs and files when leaving the computer temporarily.
Page 139: Using A Supervisor Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 140 Enter the password again, then click OK. Click OK to exit. Deleting a supervisor password To delete a supervisor password: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Secure tab.
Page 141: Using A User Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 142: Deleting A User Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 143: Deleting A User Password
Click OK to exit. Deleting a user password To cancel the power-on password function: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, click the Optimize tab.
Page 144: Toshiba Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. NOTE The TOSHIBA PC Diagnostic Tool utility may show tests for features you do not have. This is normal and does not indicate a problem. To use the TOSHIBA PC Diagnostic Tool utility:...
Page 145: Fn-Esse
You can assign any key that is not associated with a hot key or a keyboard overlay. ® Starting Fn-esse Click Start, All Programs, Toshiba, Utilities, and then Fn-esse, or click the Hotkey Assignment icon in the Optimize tab of TOSHIBA Assist.
Page 146: Toshiba Sd™ Memory Card Format Utility
Bridge Media Adapter slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card Format, or click the SD Memory Card icon in the Optimize tab of TOSHIBA Assist.
Page 147: Toshiba Power Saver
The TOSHIBA Power Saver Properties window appears. (Sample Image) TOSHIBA Power Saver Properties window The Profile panel on the left of the TOSHIBA Power Saver Properties window shows the power profiles used to control power usage for both AC power and battery power, as well as the estimated battery life for each power profile mode.
Page 148: Preset Power Profiles
Utilities TOSHIBA Power Saver Preset Power Profiles The preset power profiles are: Full Power High Power Normal DVD Playback Presentation Long Life These profiles cannot be deleted. It is not recommended to change the settings of these profiles. If you need a custom profile, create a new profile with the properties you require.
Page 149: Mouse Utility
To access the Mouse utility: Click Start, Control Panel, Printers and other Hardware, and then Mouse, or click the Mouse icon in the Optimize tab TOSHIBA Assist. The Mouse Properties screen appears. (Sample Image) Mouse Properties screen The settings you can change are divided into these categories:...
Page 150: Toshiba Hardware Setup
Windows operating system. To access it: Click Start, All Programs, Toshiba, Utilities, and then Assist, or click the TOSHIBA Hardware Setup icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA Hardware Setup screen appears.
Page 151 Utilities TOSHIBA Hardware Setup CPU—Allows you to enable or disable CPU frequency switching modes Dynamically Switchable—This mode is the default setting for your computer, and automatically changes the processing frequency and decreases voltage depending on the power source: AC Power—If your computer is connected to the AC adaptor, the CPU frequency mode is set to high for faster processing.
Page 152: Toshiba Zooming Utility
To zoom in, hold down the key and press ; to zoom out, hold down the key and press For more information about how to use the TOSHIBA Zooming Utility, right-click the icon in the Taskbar and then click Help.
Page 153: Toshiba Button Controls
Utilities TOSHIBA Button Controls TOSHIBA Button Controls The TOSHIBA Button Controls allow you to customize the Internet and CD/DVD buttons located above the keyboard. To access TOSHIBA Button Controls: Click the TOSHIBA Button Control icon in the Optimize tab TOSHIBA Assist.
Page 154: Cd/Dvd Drive Acoustic Silencer
To access the utility: Double-click the icon in the task tray, or click the CD/DVD Drive Acoustic Silencer icon in the Optimize tab of TOSHIBA Assist. The CD/DVD Drive Acoustic Silencer screen appears. Click Set Quiet Mode to make the drive run more slowly and quietly for listening to music or audio files on a CD.
Page 155: Toshiba Accessibility
Utilities TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the...
Page 156: Fingerprint Authentication Utility
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 157 Utilities Fingerprint Authentication Utility Swipe your finger on the reader. A sample will be created and indicated by a Fingerprint icon. Repeat the previous step. Swipe the same finger on the reader two more times to create two more samples. The final template will be created from these three samples.
Page 158: Fingerprint Logon
Utilities Fingerprint Authentication Utility Fingerprint Logon The fingerprint utility enables logon to your computer using fingerprints. During user enrollment, fingerprint samples are saved ® and associated with the user’s Windows user account. When the user attempts to log on again, the user’s fingerprint is read and compared with the user’s enrolled fingerprints;...
Page 159 Utilities Fingerprint Authentication Utility Check the option Replace the power-on and hard drive passwords with the fingerprint reader. Power-on security can be configured to operate with the fingerprint logon feature. If a fingerprint used for power-on security matches a fingerprint in an existing passport, the corresponding user is logged ®...
Page 160: Control Center
Utilities Fingerprint Authentication Utility Control Center The Control Center contains various functions for fingerprint management and for setting up your fingerprint software. Available options depend on the software status, used hardware, and installed applications. (Sample Image) Main Fingerprint Control Center Window Fingerprints Enroll or edit current user’s fingerprint templates—Runs the fingerprint enrollment wizard.
Page 161: Password Bank
Utilities Fingerprint Authentication Utility Fingerprint Storage Inspector—Opens the Fingerprint Storage Inspector dialog where you can see the contents of your fingerprint storage. Help Get help information—Displays this help. The help files in other languages (depending on your installation) are located in the mui subfolder of your installation folder.
Page 162 Utilities Fingerprint Authentication Utility The Biomenu contains the following menu options: Lock computer—Locks your computer. Use the reader to unlock the computer again. Registered Sites—Displays a list of your Web pages registered by Password Bank. To display and fill in a registered page in your default Web browser, click it in the list.
Page 163 Utilities Fingerprint Authentication Utility If you directly access a registered page from your browser without using the Biomenu’s Registered Sites option, Password Bank displays a hint that the page is registered and can be replayed. These hints can be turned off in the Password bank tab of the User Settings dialog.
Page 164 Select a registration. Click Delete. How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory. If the computer changes ownership, Toshiba recommends the following procedure: Click Start, All Programs, Protector Suite QL, and then Control Center.
Page 165: Care And Maintenance Of Your Fingerprint Reader
Utilities Fingerprint Authentication Utility Care and maintenance of your fingerprint reader Failure to follow these guidelines and/or procedures might result in damage to the reader or cause reader failure, finger recognition problems, or lower finger recognition success rate. Do not scratch or poke the reader with your nails or any hard or sharp objects.
Page 166: Fingerprint Reader Limitations
Toshiba does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this...
Page 167: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 168 If Something Goes Wrong Problems that are easy to fix Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with the next step. Close the remaining programs one by one by selecting the program name, then End Task.
Page 169: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start. Make sure you attached the AC adaptor and power cord/cable properly or installed a charged battery.
Page 170 Try turning the computer on again. If the computer starts normally, the AC adaptor may be defective and will need to be replaced (see the Toshiba Web site at accessories.toshiba.com). If the AC power light starts flashing, remove the battery, and continue with the steps below.
Page 171: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working If the trickle-charging does not prove effective, visit the Toshiba Web site at pcsupport.toshiba.com and see the Support Bulletin Step-Charging the computer’s battery (click the ® Ask Iris link and search for the support bulletin by name).
Page 172: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. To open the Startup menu: Restart your computer.
Page 173: The Windows Operating System Can Help You
Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver ®...
Page 174: A Plan Of Action
If Something Goes Wrong Resolving a hardware conflict A plan of action The smooth operation of the system depends on the interaction of all devices, programs, and features. If the system or one of its attached devices is not working, resolving the problem can be time- consuming and frustrating.
Page 175: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Plug and Play With Plug and Play and the operating system, avoiding hardware conflicts is easy. Plug and Play is a computer standard that helps the system BIOS (basic input/output system) and the operating system to automatically assign system resources to Plug and Play- compliant devices.
Page 176 If Something Goes Wrong Resolving a hardware conflict Disabling a device Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category.
Page 177: Memory Problems
If Something Goes Wrong Resolving a hardware conflict The Driver tab, which displays the drivers being used by the device. The tabs that appear in the dialog box vary from one device to another. A Troubleshooting button is also present. Click Troubleshoot...
Page 178: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Power and the batteries Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery, optional high-capacity battery, and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adaptor or power cord/cable will neither power the computer nor recharge the batteries.
Page 179: Keyboard Problems
After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com.
Page 180: Display Problems
If Something Goes Wrong Resolving a hardware conflict Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing simultaneously.
Page 181 If Something Goes Wrong Resolving a hardware conflict The built-in screen flickers. Some flickering is a normal result of the way the screen produces colors. To reduce the amount of flickering, try using fewer colors. To change the number of colors displayed: ®...
Page 182: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them.
Page 183: Optical Drive Problems
If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software. Consult your network administrator.
Page 184: Sound System Problems
For more information regarding supported optical media formats, refer to the complete detail specifications for your computer at pcsupport.toshiba.com. If the problem is with a data optical disc, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 185: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict If you are using external headphones or speakers, check that they are securely connected to your computer. The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud.
Page 186 If Something Goes Wrong Resolving a hardware conflict Double-click the appropriate PC Card, which will be listed under one of the categories shown, for example: Disk drives, Network adapters, Other, etc. The operating system displays your PC Card’s Properties dialog box, which contains information about your PC Card configuration and status.
Page 187: Printer Problems
If Something Goes Wrong Resolving a hardware conflict A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section.
Page 188: Modem Problems
To determine if your computer has an internal Wi-Fi adapter, check ® the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wireless antenna ON/OFF ® switch even though they do not have an internal Wi-Fi adapter.
Page 189 SSID assigned to the access point you are attempting to connect through. SSIDs are case- sensitive. Toshiba provides a Client Manager utility for setting and managing SSIDs. Check the Control Panel’s Device Manager to verify that the ®...
Page 190 If Something Goes Wrong Resolving a hardware conflict Connect your computer directly to your router or broadband modem, by plugging a standard CAT5 Ethernet patch cable (sold separately) into your computer's RJ45 Ethernet port. If your connection problem disappears, the problem lies in the ®...
Page 191: Dvd Operating Problems
“Checking device properties” on page 176 for instructions on using Device Manager to view the optical drive properties. Check the Toshiba Web site for new information on optical drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 192 If Something Goes Wrong DVD operating problems Jumping video lines appear around the DVD-ROM video window. To change the screen’s display resolution: Click Start, Control Panel. The Control Panel window appears. Click Appearance and Themes, and double-click the Display icon. The Display Properties dialog box appears.
Page 193: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Click and hold the up arrow by the list or move the slide to the top. Click None. Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes.
Page 194: Data And System Configuration Backup In The Windows ® Operating System
If Something Goes Wrong Develop good computing habits ® Data and system configuration backup in the Windows operating system ® The Windows operating system offers some easy-to-use features ® for backing up your Windows settings and your data—documents and other important files. Take advantage of these features to protect yourself from much more difficult and time-consuming restoration procedures, and to safeguard your valuable data from loss.
Page 195 An external hard drive is recommended in case the internal hard drive fails. No additional software is required. Most of the optical drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from optical discs.
Page 196 If Something Goes Wrong Develop good computing habits ® A Windows Explorer window will open for the blank CD. This window will be referred to as “the CD window.” ® Open a second Windows Explorer window by clicking Start, then My Computer. In this second window, browse to the files you wish to back up.
Page 197 If Something Goes Wrong Develop good computing habits The CD will be ejected. It should contain all of the files you have selected, but you may easily verify this by placing the CD back into the drive, and viewing the list of files. ®...
Page 198 If Something Goes Wrong Develop good computing habits Create a Restore Point (refer to “Saving system configuration with Restore Points” on page 194). Before installing anything, use the System Restore utility to set a Restore Point (see the section titled Restore Points). If anything goes wrong, you will ®...
Page 199: If You Need Further Assistance
Go to the Tech Support Center, select your particular model from the list and go to the Detailed Specifications for that model. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 200: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 201 Spain United States The Rest of Europe Toshiba America Information Toshiba Europe (I.E.) GmbH Systems, Inc. Hammfelddamm 8 9740 Irvine Boulevard D-4-1460 Neuss Irvine, California 92618 Germany United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm.
Page 202: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 203: Password Security
Hot Keys Password security Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user. With a password The Fn + F1 key combination turns off the display and activates instant security.
Page 204: Maintaining Security When The Battery Is Not Fully Charged
This hot key displays the power profile pop-up window and cycles through the power profiles. (Sample Image) Power profiles The properties of each power profile are set in the TOSHIBA Power Saver utility. For more information, see “TOSHIBA Power Saver” on page 147.
Page 205: Standby Mode
Hot Keys Standby mode Standby mode This hot key places the computer into Standby mode. A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box. (Sample Image) Sample Standby confirmation box For more information about Standby mode, please see “Using and configuring Standby mode”...
Page 206: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Some modes are only available with the NOTE appropriate device attached and turned on. LCD—Internal display only LCD + CRT—Internal display and external monitor simultaneously CRT—External monitor only LCD + TV Multi Monitor—Internal display and...
Page 207: Disabling Or Enabling Wireless Devices
For more information on using the TouchPad, see “Using the TouchPad™” on page (Sample Image) Disable and enable TouchPad windows Zooming applications in/out This hot key turns on the TOSHIBA Zooming Utility to zoom-out. For more information, see “TOSHIBA Zooming Utility” on page 152.
Page 208: Keyboard Hot Keys
Hot Keys Keyboard hot keys Keyboard hot keys This hot key turns the cursor control overlay on and off. This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off. This hot key switches screen resolution.
Page 209: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved...
Page 210: Appendix C: Using Configfree ® With Your
Appendix C ® Using ConfigFree with your Toshiba Computer ® NOTE All references to Bluetooth in this appendix are applicable only if Bluetooth ® is available on your system. ® ConfigFree is a set of utilities that makes it easy to control communication devices and network connections.
Page 211: Getting Started
ConfigFree. Double-click the ConfigFree icon on the Taskbar. Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. Click the ConfigFree icon on the Taskbar, and then click the desired utility.
Page 212 ® Using ConfigFree with your Toshiba Computer Getting Started When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 213: Configfree ® Utilities
® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities (Sample Image) ConfigFree Launcher coming back into view ® ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 214 ® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities Status of wireless communication switch (on or off) (Sample Image) Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 215: Search For Wireless Devices
® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities A triangle containing an exclamation point also appears on the Connectivity Doctor screen, and an orange frame describes the relevant location. You can also view the possible cause and solution for the problem by clicking the exclamation point.
Page 216 ® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities Click Search for Wireless Devices. A virtual map appears with a graphical representation of the wireless devices that have been detected. NOTE Search for Wireless Devices can also be started from the ConfigFree Launcher.
Page 217 ® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities Creating a new wireless connection ® NOTE This feature is only supported on systems running Windows SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 218 ® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities Enter the SSID/WEP information and connect to the device. NOTE After the Access Point is set up and added to the connection list, the system displays the Connection screen rather than the Wireless settings screen.
Page 219 ® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities ® Drag and drop the file directly onto the icon for that Bluetooth device. ® (Sample Image) Dragging the file to the Bluetooth device icon To be prompted for the device: ®...
Page 220: Profile Settings
® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities Click Send. NOTE During a file transfer, connecting and disconnecting to the selected device will occur automatically. ® Disconnecting from a Bluetooth device ® To disconnect from a Bluetooth device: Place the cursor on top of the connected line.
Page 221 ® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities To create a profile: Click the icon in the system tray. Move the pointer to Profile. Click Add. The Add Profile screen appears. Select Capture and click OK. The Add Profile screen appears.
Page 222: Configfree ® Summit
® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities (Sample Image) Expanded Add Profile screen NOTE The online Help provides real-world examples of setting up profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary.
Page 223 ® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities ® Bluetooth PAN/LAP Cross cable (Ethernet or Gbit Ethernet) To host a ConfigFree SUMMIT, click the SUMMIT icon on the ConfigFree Launcher, select the users that you want to attend the SUMMIT meeting, and send them an invitation.
Page 224 ® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities NOTE Only the SUMMIT Host (the initiator) can share files with multiple users by this method. SUMMIT users can share a file with only one other user. (Sample Image) Sharing a file with one user To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired.
Page 225 ® Using ConfigFree with your Toshiba Computer ® ConfigFree Utilities NOTE Participating users must be connected by LAN, wireless LAN, or ® Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. ® Using ConfigFree SUMMIT ® To host a ConfigFree...
Page 226: Quick Connect
SUMMIT Toshiba Wireless Projector The Quick Connect feature switches the Wireless LAN connection to connect to a Toshiba Wireless Projector. Once the projector utility is installed, launching the Quick Connect utility automatically opens the Wireless Data Projector Application. There you can configure how you would like to use the projector.
Page 227 NOTE Because the wireless LAN’s default connection setting is for Ad Hoc mode, the Toshiba Wireless Projector will not connect if the projector is set to Infrastructure mode. If this occurs, you can change the wireless LAN’s connection setting to Infrastructure mode to match the settings on the projector.
Page 228: Using The Automatic Switch
Toshiba Device submenu. This action switches the computer’s wireless network setting to Ad Hoc mode, and launches the SUMMIT feature. (Sample Image) Using the Direct Link Toshiba Device feature Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on.
Page 229: Semi-Automatic Switch Feature
® Using ConfigFree with your Toshiba Computer Semi-Automatic Switch Feature NOTE If your computer is connected to multiple wireless LAN devices, the Auto Switch (SSID) feature is disabled. To enable this feature, only one wireless LAN device can be used.
Page 230: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. alternating current BIOS basic input/output system bits per second compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS...
Page 231 Glossary disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte hard disk drive HTML Hypertext Markup Language IEEE...
Page 232 Glossary SDRAM synchronous dynamic random access memory SRAM static random access memory SVGA super video graphics adapter thin film transistor universal serial bus uniform resource locator wide area network World Wide Web Terms The following terms may appear in this user’s guide. active-matrix display —...
Page 233 Glossary baud rate — The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second). See also bits per second. BIOS (basic input/output system) —...
Page 234 Glossary central processing unit (CPU) — The chip that functions as the “brain” of the computer. It takes information from outside sources, such as memory or keyboard input, processes the information, and sends the results to another device that uses the information. character —...
Page 235 Glossary default — The setting selected by a program when the user does not specify an alternative setting. device — A component attached to the computer. Devices may be external (outside the computer’s case) or internal (inside the computer’s case). Printers, disk drives, and modems are examples of devices.
Page 236 Glossary double-click — To press and release the pointing device’s primary button rapidly twice without moving the pointing device. In the ® Windows operating system, this refers to the pointing device’s left button, unless otherwise stated. double-density diskette — A 3.5-inch diskette that can hold up to 720 KB of information (half the capacity of a high-density diskette).
Page 237 Glossary file — A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. file allocation table (FAT) — The section of a disk that keeps track of the location of files stored on the disk.
Page 238 Glossary Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 239 Glossary liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 240 Glossary network — A collection of computers and associated devices that are connected by communications facilities. A network allows you to share data and peripheral devices, such as printers, with other users and to exchange electronic mail. non-interlaced — A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen.
Page 241 Glossary pointing device — Any device, such as the TouchPad or a mouse, that enables you to move the cursor on the screen. port — A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor —...
Page 242 Glossary ROM (read-only memory) — Non-volatile memory that can be read but not written to. Non-volatile here means that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up.
Page 243 Glossary upload — To send a file to another computer through a modem or network. See also download. — See universal serial bus (USB). utility — A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management.
Page 244: Index
AC power real-time clock (RTC) 100 connecting adaptor 44 removing 109 accessories BIOS Setup memory 48 see TOSHIBA Hardware Setup adding memory 48 Bridge Media Adapter adjusting recording quality 126 inserting memory media 129 Alt keys 83 removing memory media 129...
Page 245 Index communications missing files/trouble accessing a network connection 119 disk 182 set up 119 running slow 182 system resources 174 diskette drive compact disc positioning 94 cannot insert a diskette 183 compact discs cannot read a diskette 183 handling 94 connecting 69 removing 97 external, connecting 69...
Page 246 Index monitor Standby mode 205 not working 181 volume mute 202 mouse 67 zooming 207 external diskette drive hot key power profile 108 connecting 69 http 122 external display, adjusting 66 i.LINK port 130 FAT (File Allocation Table) 182 icon 117 file extensions 89 desktop 117 file, backing up 81...
Page 247 Index keyboard network character keys 82 accessing 119 function keys 83 Dial-Up Networking Wizard 119 hot keys 208 networking not working 169 wireless 119 overlay keys 84 troubleshooting 179 opening the display panel 46 using 82 optical discs Windows® special keys 83 inserting 93 keyboard, external 67 optical drive...
Page 248 PC Card warning resume failure 169 inserted 186 Windows® operating system not computer will not power up 169 working 171 contacting Toshiba 199 program, starting 85 corrupted/damaged data files 183 programs Device Manager 175 not running correctly 183...
Page 249 114 registering computer 42 icons 36 worldwide offices 200 precautions 39 TOSHIBA Assist 132 saving files 87 TOSHIBA Button Controls 153 screen TOSHIBA Hardware Setup 150 blank 180 Toshiba online resources 98 does not look normal/flickers 180 traveling tips 115...
Page 250 Index utilities Power Saver 147 video projector adjusting display 66 warranty limited warranty 37 Web 122 Web sites 199 Wi-Fi® wireless networking 119 Windows Media® Player 95 Windows Media® Player icon 117 Windows® Explorer 85 Windows® operating system Help and Support 173 problem solving 171 Windows®...

This manual is also suitable for:

Satellite pro m200 series

Toshiba M200 - Portege - Pentium M 1.5 GHz User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree ® with Your

Quick Links

Related Manuals for Toshiba M200 - Portege - Pentium M 1.5 GHz

Summary of Contents for Toshiba M200 - Portege - Pentium M 1.5 GHz