If the Hard Disk Activity
Light Does Not Work
Check that the Flexible Disks item and the Write on Flexible Disks
•
item are not set to locked in the Setup program (Security > Hard-
ware Protection).
Clean the flexible disk drive using a diskette cleaning kit.
•
Check that the disk power and data cables are correctly connected.
•
If the Hard Disk Drive Does not Work
Check that the disk power and data cables are correctly connected
•
(Refer to "Connecting Devices" on page 33).
For an IDE drive, check the IDE Device's configuration settings in
•
the Setup program (Advanced > IDE Devices).
For an IDE drive, check the Hardware Protection settings in the
•
Setup program (Security > Hardware Protection).
For an IDE drive, check the Boot Device Security settings in the
•
Setup program (Security > Boot Devices Security).
For a SCSI drive, check the SCSI Interface settings in the Setup
•
program (Advanced > Integrated SCSI Interface) and in SCSI Select.
If the hard disk activity light does not flicker when the PC Workstation
is accessing the hard disk drive:
Check that the control panel connector is firmly attached to the
•
system board.
Check that the disk power and data cables are correctly connected.
•
3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
English
63