Spinning - Miele WWD 164 Operating Instructions Manual
Hide thumbs
Also See for WWD 164:
- Operating instructions manual (92 pages) ,
- Operating instructions manual (92 pages)
Table of Contents
Advertisement
Final spin speed in wash
programmes
When a programme is selected, the
sensor for the optimum spin speed for
that programme will be brightly lit up in
the control panel.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is
indicated in the table.
Programme
ECO 40-60
Cottons
Minimum iron
Delicates
Woollens
Shirts
Express 20
Dark garments/Denim
Outerwear
Proofing
Drain/Spin
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for the
Cottons programme, an additional rinse
is introduced.
Deselecting final spin (Rinse
hold)
Touch the sensor (Rinse hold).
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
Ending a programme with a spin cycle
rpm
The sensor for the optimum spin speed
1400
lights up in the control panel. You can
change the spin speed.
1400
Touch the Start/Add laundry sensor.
1200
900
Ending a programme without a spin
1200
cycle
900
Reduce the spin speed to .
1200
Touch the Start/Add laundry sensor.
1200
Deselecting the interim spin
900
and the final spin
1200
Touch the sensor.
1400
After the last rinse, the water will be
pumped away and the Anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.
Spinning
27
Advertisement
Table of Contents
