Table of Contents
Advertisement
QUICK START INSTRUCTIONS
1. Insert the power cord into the receptacle.
2. Plug the ozone generator into a grounded 120 Volt outlet.
3. Turn the timer dial to the desired treatment time. If using
the "Hold" function to run continuously, when re-entering
the area turn the timer to the "Off" position and leave the
area. Set for up to 120 minutes and the unit will shut off
automatically after the time has run out.
4. Before re-entering the treated space, be sure ozone is at
a safe level. If excessive amounts of ozone are detected,
ventilate the space before allowing people or pets back
into the area.
5. If odors or contaminants are still detected, re-treat the
area until it is completely deodorized and sanitized.
Hold Position: For more severe odor problems, turn the timer
dial to the "Hold" position. In the "Hold" position, the unit will
stay on continuously.
Warning: For use in unoccupied spaces only! Excess ozone
concentrations can cause mucous membrane and respiratory
irritation. If you detect the ozone smell when you enter the
room, ventilate the area and do not re-occupy the area until
the ozone is at a safe level.
Advertisement
Table of Contents
