Memory Fan Duct; Front Card Guide And Fan - HP Z Series Maintenance And Service Manual
Hide thumbs
Also See for Z Series:
- User manual (40 pages) ,
- Installation manual (14 pages) ,
- Faq (1 page)
Table of Contents
Advertisement
Memory fan duct
To remove the memory fan duct, use these procedures.
Before removing the memory fan duct, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
Remove the memory fan duct:
1.
Release the memory fan duct by lifting the tabs (1).
2.
Remove the memory fan duct (2).
To install the memory fan duct, reverse the removal procedure.
Front card guide and fan
To remove the front card guide and fan, use these procedures.
Before removing the front card guide and fan, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
Remove the front card guide and fan:
1.
If installed, disconnect the cables from the placeholder sockets (1) on the front card guide and fan
housing.
2.
Release the two retention clips (2) that secure the front card guide and fan to the computer.
3.
Tilt the front card guide and fan (3) away from the computer.
26
Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page
20).
Preparation for disassembly on page
Access panel on page
20).
18).
18).
Advertisement
Table of Contents
