Listening To Tapes - Panasonic SC-AK44 Operating Instructions Manual
Hide thumbs
Also See for SC-AK44:
- Operating instructions manual (32 pages) ,
- Operating instructions manual (32 pages) ,
- Operating instructions manual (33 pages)
Table of Contents
Advertisement
Listening fo tapes
|
You can use either deck 1 or deck 2 for tape playback.
The unit can play normal, high and metal position tapes.
It identifies the type automatically.
Use normal position tapes.
High position and metal position tapes can be played, but the unit will
not be able to do full justice to the characteristics of these tapes.
Rome
SA
DIW
Press [TAPE, DECK 1/2].
The unit will come on automatically.
If the unit was off and a cassette was loaded, play will start
automatically (One touch play function).
2) Press [A DECK 1 OPEN] or [4 DECK 2 OPEN] and
insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
3
only
Press [REV MODE] to select the reverse mode.
Every time you press the button:
z
re? Bed OR
eS
>
Z
: One side is played.
=>
: Both sides are played.
CZD : Both sides are played 8 times each.
To listen to 2 tapes consecutively
Load a tape into each deck and select "C<*>". Both tapes will
be played 8 times each.
4
Press [«4/ II] or P] to start playback.
[>]
: The forward side (front side) will play.
[4/11] : The reverse side will play.
SHKA
Press P>] to start playback.
One side is played, then playback stops automatically.
To play on the other side of the tape, tum the tape over and
press [B].
E
Casse
deck
opera
i=,
H
Adjust the volume.
To stop tape playback
Press [W].
EJ To change the deck to be used
Press [TAPE, DECK 1/2] to select the deck you want to use when
you load cassettes into both decks.
e Playback is momentarily interrupted while playing back tapes, if you
open the other deck.
è Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
è Tape slack can get caught up in the mechanism and should be
al
Bsa
|
taken up before the tape is played.
ba SC-AK44
Deck in use
Endless tapes can get caught up in the deck's moving parts if used
incorrectly. Use tapes appropriate to this units auto-reverse mecha-
SHEA
nism.
S i
FA
i
;
'
:
ee
a
around the revolving parts. Always read the instructions provided
with your tapes.
| neche
o ae
s
TTI
mt
Failure to operate these tapes correctly may cause the tape to wind
RQT5621
Advertisement
Table of Contents
