Roaming To Another Network; Using Hp Mobile Broadband (Select Models Only); Inserting A Sim - HP Mini 1103 Reference Manual
Hide thumbs
Also See for Mini 1103:
- User manual (83 pages) ,
- Brochure (4 pages) ,
- Maintenance and service manual (102 pages)
Table of Contents
Advertisement
Roaming to another network
When you move your computer within range of another WLAN, Windows attempts to connect to that
network. If the attempt is successful, your computer is automatically connected to the new network. If
Windows does not recognize the new network, follow the same procedure you used initially to connect
to your WLAN.
Using HP Mobile Broadband (select models only)
HP Mobile Broadband enables your computer to use wireless wide area networks (WWANs) to access
the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile
Broadband requires a network service provider, which in most cases is a mobile phone network provider.
When used with mobile network provider service, HP Mobile Broadband gives you the freedom to stay
connected to the Internet, send e-mail, or connect to your corporate network whether you are on the
road or outside the range of Wi-Fi hotspots.
NOTE:
You may need the HP Mobile Broadband Module serial number to activate mobile broadband
service. Refer to the Getting Started guide for the location of the serial number.
Some mobile network service providers require the use of a subscriber identity module (SIM). A SIM
contains basic information about you, such as a personal identification number (PIN), as well as network
information. Some computers include a preinstalled SIM. If the SIM is not preinstalled, it may be included
with the HP Mobile Broadband information provided with your computer, or it may be provided separately
by the mobile network service provider.
For information on inserting and removing the SIM, refer to
a SIM on page
For information on HP Mobile Broadband and how to activate service with a preferred mobile network
service provider, refer to the HP Mobile Broadband information included with your computer. For
additional information, see the HP Web site at
Inserting a SIM
NOTE:
To identify the SIM slot location, refer to the Getting Started guide.
1.
Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the
computer on by pressing the power button. Then shut down the computer through the operating
system.
2.
Close the display.
3.
Disconnect all external devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Remove the battery.
6.
Insert the SIM into the SIM slot, and gently press the SIM into the slot until it is firmly seated.
CAUTION:
computer. If a SIM is inserted incorrectly, it could damage the SIM and the SIM connector.
To reduce the risk of damage to the connector, use minimal force when inserting a SIM.
7.
Replace the battery.
NOTE:
8.
When inserting a SIM, position the card to match the icon next to the SIM slot on the
HP Mobile Broadband is disabled if the battery is not replaced.
Inserting a SIM on page 7
http://www.hp.com/go/mobilebroadband
Using HP Mobile Broadband (select models only)
and
Removing
(U.S. only).
7
Advertisement
Chapters
Table of Contents
