hit counter script
Download Print this page

Advertisement

All cleaning and maintenance must be carried out when the unit is cold and unplugged from the mains supply.
1)
The outer case of this unit can be cleaned with a slightly damp cloth using a small amount of liquid
detergent. Under no circumstances allow the unit to be immersed in liquid or allow liquid to enter the product.
2)
Do not use strong detergents or cleaning agents.
3)
Dust should be removed using with a soft haired brush (paint brush)
Maintenance
The only user serviceable part is the tip and this should only be replaced using a genuine Eagle part. Contact
your dealers for help. Make sure the unit is cold and unplugged from the mains supply first.
If the mains lead is damaged, it must be replaced by the manufacturer or and
authorised service centre.
If the mains plug needs to be replaced, proceed as follows:
Connect the brown wire to the terminal labelled "L".
Connect the blue wire to the terminal labelled "N".
Connect the green/yellow to the terminal labelled "E"
Make sure that the cord-grip is positioned correctly (over the outer sheath
of the cable) and it fully tightened
At time of going to press, the average cost of electricity is £0.12 per unit (kilowatt-hour). The amount you are
being charged will be shown on your electricity bill. At this cost, the Y061G will cost £0.15 per day to run on the
"High Speed" setting.
When used in an office environment, we recommend that this product should be safety-tested yearly by a
qualified electrician (PAT Tested).
We recommend that it is PAT tested regularly when used in a domestic environment.
Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years or at every
change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must be inspected at least once
every 5 years.
It is recommended that all building be fitted with smoke alarms (it is mandatory for new buildings).
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal is free of charge to the end-
user. When replacing an existing appliance with a similar new appliance your retailer may take the old appliance
for disposal.
CLEANING & MAINTENANCE
OPERATING COSTS
PAT TESTING
GENERAL SAFETY REQUIREMENTS
DISPOSAL AND RECYCLING
5A

Advertisement

loading