hit counter script

Sata Hard Drives; Smart Ata Drives; Sata Hard Drive Cables; Sata Data Cable - HP EliteDesk 405 G4 Desktop Mini Maintenance And Service Manual

Table of Contents

Advertisement

SATA hard drives

Table 3-3
SATA hard drive characteristics
Serial ATA hard drive characteristics
Number of pins/conductors in data cable
Number of pins in power cable
Maximum data cable length
Data interface voltage differential
Drive voltages
Jumpers for configuring drive
Data transfer rate

SMART ATA drives

The Self Monitoring Analysis and Recording Technology (SMART) ATA drives for the HP Personal Computers
have built-in drive failure prediction that warns the user or network administrator of an impending failure or
crash of the hard drive. The SMART drive tracks fault prediction and failure indication parameters such as
reallocated sector count, spin retry count, and calibration retry count. If the drive determines that a failure is
imminent, it generates a fault alert.

SATA hard drive cables

SATA data cable

Always use an HP approved SATA 6.0 Gbps cable as it is fully backwards compatible with the SATA 1.5 Gbps
drives.
Current HP desktop products ship with SATA 6.0 Gbps hard drives.
SATA data cables are susceptible to damage if overflexed. Never crease a SATA data cable and never bend it
tighter than a 30 mm (1.18 in) radius.
The SATA data cable is a thin, 7-pin cable designed to transmit data for only a single drive.

Cable management

Always follow good cable management practices when working inside the computer.
Keep cables away from major heat sources like the heat sink.
Keep cables clear of sliding or moveable parts to prevent them from being cut or crimped when the parts
are moved.
When folding a flat ribbon cable, never fold to a sharp crease. Sharp creases may damage the wires.
Do not bend any cable sharply. A sharp bend can break the internal wires.
Never bend a SATA data cable tighter than a 30 mm (1.18 in) radius.
Never crease a SATA data cable.
14
Chapter 3 Routine care, SATA drive guidelines, and disassembly preparation
7/7
15
100 cm (39.37 in)
400 mV-700 mV
3.3 V, 5 V, 12 V
N/A
6.0 Gbps

Advertisement

Table of Contents
loading

Table of Contents