Page 1 Qosmio F20 TOSHIBA Qosmio F20 Portable Personal Computer User’s Manual...
Page 2 Copyright © 2005 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
Page 3 Trademarks IBM is a registered trademark and IBM PC is a trademark of International Business Machines Corporation. Intel, Intel SpeedStep, Pentium, Celeron and Centrino are trademarks or registered trademarks of Intel Corporation. Windows and Microsoft are registered trademarks of Microsoft Corporation. Photo CD is a trademark of Eastman Kodak.
Page 4 This product and the supplied accessories are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if accessories or cables not manufactured / distributed by TOSHIBA are connected or implemented. To avoid EMC problems in general, the following advice should be observed: Only CE marked accessories should be connected / implemented.
Page 5: Working Environment
Any consequences resulting from the use of this product in working environments that are not approved or the use is restricted are not the responsibility of TOSHIBA Corporation. The consequences of the use of this product in those working environments may be:...
Page 6 Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
Page 7: Optical Disc Drive Safety Instructions
Optical disc drive safety instructions Be sure to check the international precautions at the end of this section. Panasonic DVD-ROM&CD-R/RW UJDA770 The DVD-ROM&CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference.
Page 8 DVD Super Multi with Double Layer Recording UJ-840 The DVD Super Multi drive with Double Layer Recording model employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 9 TEAC DVD-ROM&CD-R/RW DW-224-EC The DVD-ROM&CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
Page 10 DVD Super Multi with Double Layer Recording DV-W28EA The DVD Super Multi drive with Double Layer Recording model employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 11 TSST (TOSHIBA SAMSUNG STORAGE TECHNOLOGY) DVD-ROM&CD-R/RW TS-L462A The DVD-ROM&CD-R/RW drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 12 DVD Super Multi with Double Layer Recording TS-L632B The DVD Super Multi drive with Double Layer Recording model employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 13 International precautions CLASS 1 LASER PRODUCT LASERSCHUTZKLASSE 1 PRODUKT TOEN60825 ADVERSEL:USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAF-BRYDER ER UDE AF FUNKTION. UNDGÅ UDSÆTTSLSE FOR STRÅLING User’s Manual CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference.
Page 14 OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Page 15: Table Of Contents
Qosmio F20 Table of Contents General Precautions The cautions on use of a Qosmio F20 series computer ..... . xx Preface Manual contents .
Page 16 TOSHIBA Password Utility ........
Page 17 Installing/Removing batteries ......... 8-50 Using Toshiba Picture Enhancement Utility ......8-53...
Page 18 Disclaimers Chapter 11 : CPU ............. . .11-1 Specific Main Memory Disclaimer/Statement .
Page 19: General Precautions
Qosmio F20 General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
Page 20: The Cautions On Use Of A Qosmio F20 Series Computer
Mobile phone Use of mobile phones can interfere with the audio system. Computer operation is not impaired but is recommended that a distance of 30 cm be maintained between the computer and a mobile phone in use. The cautions on use of a Qosmio F20 series computer 1.
Page 21 General Precautions To prevent possible overheating of the CPU, make sure the cooling fan’s air intake is not blocked. The fan draws in air by creating a vacuum. If the fan is blocked, it could cause the CPU to run at a lower performance level or cause the computer to shut down.
Page 22 General Precautions xxii User’s Manual...
Page 23: Preface
Qosmio F20 Preface Congratulations on your purchase of the Qosmio F20 computer. This powerful notebook computer provides excellent expansion capability, including multimedia devices, and it is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Qosmio F20 computer.
Page 24: Conventions
Chapter 5, keypad overlay and hot keys. Chapter 6, Power, gives details on the computer’s power resources and battery save modes. Chapter 7, Setup program. Chapter 8, Using the Remote Controller, Front operation button and QosmioPlayer, explains how to use the Remote Controller on Windows XP Media Center Edition and Windows XP Home Edition models as well as provides information about QosmioPlayer.
Page 25 Key operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign (+). For example, Ctrl + C means you must hold down Ctrl and at the same time press C.
Page 26 Preface xxvi User’s Manual...
Page 27: Introduction
Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Page 28 TOSHIBA Picture Enhancement Utility InterVideo WinDVR TOSHIBA SD Memory Card Format TOSHIBA Acoustic Silencer TOSHIBA Virtual Sound TOSHIBA Hotkey Utility for Display Devices TOSHIBA Display Device Change Utility TOSHIBA Password Utility Online manual Product Recovery Media Windows XP Home Edition ®...
Page 29 TOSHIBA TouchPad On/Off Utility TOSHIBA Zooming Utility TOSHIBA Picture Enhancement Utility TOSHIBA SD Memory Card Format TOSHIBA Acoustic Silencer TOSHIBA Virtual Sound TOSHIBA Hotkey Utility for Display Devices TOSHIBA Display Device Change Utility TOSHIBA Password Utility Online manual Product Recovery Media Documentation Qosmio F20 Portable Personal Computer User’s Manual...
Page 30: Features
Features The computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and benefits: Processor Built-in Some models of the computers carry Intel is based on three separate technologies of Intel ®...
Page 31 Video RAM Power Battery pack Disclaimer (Battery Life) For more information on the Disclaimer regarding Battery Life, please refer to the Disclaimers section in Chapter 11. RTC battery AC adaptor User’s Manual There are three different types of graphics controllers. The Video RAM specifications will differ depending on the type of graphics controller used in the computer.
Page 32: Optical Media Drive
Disks Hard disk drive Disclaimer (HDD Drive Capacity) For more information on the Disclaimer regarding HDD Drive Capacity, please refer to the Disclaimers section in Chapter 11. Optical media drive Computers in this series can be configured with an optical media drive. The available optical media drives are described below.
Page 33 DVD Super Multi drive Double Layer Display The computer’s LCD panel supports high-resolution video graphics. The screen can be set at a wide range of viewing angles for maximum comfort and readability. Built-in Disclaimer (LCD) For more information on the Disclaimer regarding LCD, please refer to the Disclaimers section in Chapter 11.
Page 34: Pointing Device
Pointing Device Built-in Touch Pad Ports External monitor Universal Serial Bus (USB 2.0) i.LINK™ (IEEE1394) Slots PC card Bridge media Multimedia Sound system TV antenna port S-Video out port A Touch Pad and control buttons in the palm rest enable control of the on-screen pointer and scrolling of windows.
Page 35 VIDEO-IN port Headphone (S/PDIF) jack Microphone jack Built-in TV Tuner Infrared receiver window Remote Controller Remote control receiver User’s Manual The port is used differently depending on the type of OS used in the computer. Windows XP Home Edition model: With the bundled VIDEO-IN cable, external devices such as TV, video recorders, etc., can be connected to the computer and WinDVR and WinDVD Creator...
Page 36 Communications Modem Wireless LAN 1-10 An internal modem provides capability for data and fax communication. It supports V.90 (V.92). The speed of data transfer and fax depends on analog telephone line conditions. It has a modem jack for connecting to a telephone line. Both of V.90 and V.92 are supported only in USA, Canada, UK, France, Germany and Australia.
Page 37: Special Features
Security Security lock slot Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hot keys The Hot key functions are supported only under Windows, they are not supported under QosmioPlayer.
Page 38 Power is restored when the hard disk is accessed. You can specify the time in the HDD power off item of the Basic Setup tab in TOSHIBA Power Saver. This feature automatically shuts down the system...
Page 39: Utilities
Use the Cooling Method item of the Basic Setup tab in TOSHIBA Power Saver. Maximum Turns on fan first, then if...
Page 40 TOSHIBA Controls Fn-esse DVD Video Player TOSHIBA Picture Enhancement Utility TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities to TOSHIBA Assist TOSHIBA Zooming Utility RecordNow! Basic for TOSHIBA 1-14 This utility has three sections to let you do the...
Page 41 Diagnostic Tool, click start, point to All Programs, point to TOSHIBA, point to Utility and click PC Diagnostic Tool. TOSHIBA Touch and Launch is a tool that allows you to perform various tasks easily using the Touch Pad. TOSHIBA Touch and Launch is useful in the following conditions.
Page 42: Options
(DDR2 533) can easily be installed in the computer. An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare or replacement. An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare or replacement.
Page 43: Chapter 2 : The Grand Tour
Qosmio F20 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Disclaimer (Non-applicable Icons) For more information on the Disclaimer regarding Non-applicable Icons, please refer to the Disclaimers section in Chapter 11. Front with the display closed The following figure shows the computer’s front with its display panel in the closed position.
Page 44 Wireless communication switch Wireless communication indicator Turn WiFi and Bluetooth functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device. Radio waves may affect pacemaker or medical device operation, possibly resulting in serious injury. Follow the instruction of your medical device when using any WiFi or Bluetooth functionality.
Page 45: Left Side
Microphone jack Headphone (S/PDIF) jack Infrared receiver window Left side The following figure shows the computer’s left side. External monitor port External monitor port S-Video out port Cooling vents Do not block the cooling vents. Never allow metal objects, such as screws, staples and paper clips, to enter the PC or keyboard.
Page 46: Right Side
PC card slot PC card eject button Right side The following figure shows the computer’s right side. AV-IN port VIDEO-IN port Universal Serial Bus (USB 2.0) ports This slot accommodates a 5 mm Type II card. The slot supports 16-bit PC cards and CardBus PC cards.
Page 47 Keep foreign objects out of the USB connectors. Never allow metal objects, such as screws, staples and paper clips, to enter the PC or keyboard. Foreign metal objects can create a short circuit, which can cause PC damage and fire, possibly resulting in serious injury. Operation of all functions of all USB devices has not been confirmed.
Page 48: Back Side
Back side The following figure shows the computer’s back side. DC IN 15V jack TV antenna port Security lock slot Security lock slot Universal Serial Bus (USB 2.0) ports LAN jack Do not connect any cable other than a LAN cable to the LAN jack. It could cause damage or malfunction.
Page 49: Underside
DC IN 15V jack TV antenna port Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Battery lock Hard disk drive Memory module cover Battery lock Battery release latch Hard disk drive User’s Manual...
Page 50: Front With The Display Open
Front with the display open This section shows the front of the computer with the display open. Refer to the appropriate illustration for details. To open the display, slide the display latch on the front of the display and lift up. Position the display at a comfortable viewing angle.
Page 51 Hibernation mode. Use the TOSHIBA Power Saver Utility to enable or disable this feature. The default is “enabled”. Refer to the TOSHIBA Power Saver Utility and Panel Power Off/On items in Chapter 1, Introduction, for details on settings.
Page 52: System Indicators
System indicators LEDs beneath icons, light when various computer operations are in progress. Power DC IN DC IN Power Battery Bridge media slot 2-10 Battery Bridge media slot System indicators The DC IN indicator glows green when DC power is supplied from the AC power adaptor. If the adaptor’s output voltage is abnormal or if the power supply malfunctions, this indicator flashes orange.
Page 53: Keyboard Indicators
Keyboard indicators The figures below show the positions of the keypad overlay indicators and the Caps Lock indicator. The following indicator shows the state of an alphabet key (pressed or released). Caps Lock The following indicators show the status of the display overlay. Arrow mode Numeric mode User’s Manual...
Page 54: Optical Media Drive
Optical media drive A DVD-ROM&CD-R/RW or a DVD Super Multi drive is installed in your computer. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows. Region codes for DVD drives and media DVD Super Multi drives and media are manufactured according to the specifications of six marketing regions.
Page 55: Dvd Super Multi Drive Double Layer
Formats The drives support the following formats: DVD-ROM CD-DA Photo CD CD-ROM XA Mode 2 (Form1, Form2) DVD -Video DVD-ROM&CD-R/RW drive The full-size DVD-ROM&CD-R/RW drive module lets you record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor.
Page 56: Ac Adaptor
For use in other regions, please buy power cords that conform to safety rules and regulations in the particular region. Always use the Toshiba AC adaptor that was provided with your PC and the Toshiba Battery Charger (that may have been provided with your PC), or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the PC.
Page 57: Getting Started
Qosmio F20 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Setting up your work space - for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.
Page 58: General Conditions
PC, it could cause a system failure, malfunction or loss of data. If dust contaminates the PC, do not turn on the power. Take it to an authorized Toshiba service provider before you use it. Never place your PC near an object that generates a magnetic field, such as a speaker or TV.
Page 59: Placement Of The Computer
Leave ample ventilation room for the fan. Do not block the vents. If the PC interferes with radio equipment, turn the PC power off immediately. Such interference could cause equipment malfunction. Never place your PC on a shaky table, uneven, tilted surface or other unstable location.
Page 60: Seating And Posture
Seating and posture The height of your chair in relation to the computer and keyboard as well as the support it gives your body are primary factors in reducing work strain. Refer to the following tips: Below eye level Foot rest Keep hands, wrists, and forearms straight, in-line and roughly parallel to the floor.
Page 61: Work Habits
Lighting Select the right level of illumination and place your PC appropriately to minimize glare from overhead lights, desk lamps and windows. Glare on the LCD or monitor may cause eye strain, eye fatigue or headaches. Consider the following suggestions regarding lighting your work environment: Position the PC so that the light source does not shine or reflect directly onto the display or shine or reflect directly into the eyes of the user.
Page 62: Connecting The Ac Adaptor
Other Things to Note Never turn off the power while an application is running. Doing so could cause loss of data. Use a virus-check program and make sure it is updated regularly. Never turn off the power, disconnect an external storage device or remove storage media during data read/write.
Page 63 Getting Started Always use the Toshiba AC adaptor that was provided with your PC and the Toshiba Battery Charger (that may have been provided with your PC), or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the PC. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the PC possibly resulting in serious injury.
Page 64 1. Connect the power cord to the AC adaptor. The Universal AC Adaptor and power cord bundled with this product may differ depending on the product model. Depending on the model, a 2-pin plug or 3-pin plug set of the above may be bundled. 2.
Page 65: Opening The Display
Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer to unlatch the display panel. 2. While holding down the palm rest with one hand so that the main body is not raised, lift the panel slowly.
Page 66: Turning On The Power
Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Refer to the section the first If the USB floppy disk drive is connected, make sure it is empty.
Page 67: Turning Off The Power
When the AC adaptor is connected, the computer will go into Standby mode according to the settings in the TOSHIBA Power Saver utility. To restore operation from Standby Mode, press the power button or press any key. The latter action only works on the internal keyboard if the Wake-up on Keyboard option is enabled in HW Setup.
Page 68 1. Click start, click Turn Off Computer and click Standby. 2. Close the display panel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel. Open Performance and Maintenance and open TOSHIBA Power Saver.
Page 69: Hibernation Mode
For the computer to shut down in Hibernation Mode, this feature must be enabled in two places: the Hibernate tab in Power Options and Setup Action tab in TOSHIBA Power Saver. If you do not configure this feature, the computer will shut down in Standby Mode - if battery power becomes depleted, data saved in Standby Mode will be lost.
Page 70: Starting Hibernation Mode
3. Select the Hibernate window in the Power Options Properties, select the Enable hibernation check box and click the Apply button. 4. Open TOSHIBA Power Saver. 5. Select the Setup Action window. 6. Enable the desired Hibernation settings for When I press the power button and When I close the lid.
Page 71: Restarting The Computer
Restarting the computer Certain conditions require that you reset the system. For example, if: You change certain computer settings. An error occurs and the computer does not respond to your keyboard commands. There are three ways to reset the computer system: 1.
Page 72: Restoring Toshiba Utilities And Drivers
Restoring TOSHIBA utilities and drivers If Windows is working properly, individual drivers or applications can be separately restored. The TOSHIBA Tools & Utilities folder (C:\TOOLSCD) contains drivers and applications, which are included with your computer system. If your system drivers or applications have become damaged in some way, you can reinstall most of the components from this folder.
Page 73: Operating Basics
Qosmio F20 Operating Basics This chapter describes the basic operations of your computer and precautions when using it, as well as the handling of CD/DVD. Using the Touch Pad To use the Touch Pad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
Page 74: Using Optical Media Drives
Using optical media drives The text and illustrations in this section refer primarily to the optional media drive. However, operation is the same for all other optical media drives. The full-size drive provides high-performance execution of CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an adaptor.
Page 75 2. Lay the CD/DVD, label side up, in the disc tray. When the disc tray is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the disc tray. After seating the CD/DVD, however, make sure it lies flat.
Page 76: Removing Discs
4. Push the center of the disc tray to close it. Press gently until it locks into place. If the CD/DVD is not seated properly when the disc tray is closed, the CD/DVD might be damaged. Also, the disc tray might not open fully when you press the eject button.
Page 77: Writing Cds On Dvd-Rom&Cd-R/Rw Drive
How to remove CD/DVD when the disk tray will not open Pressing the eject button will not open the disc tray when the computer power is off. If the power is off, you can open the disc tray by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
Page 78: Before Writing Or Rewriting
Ultra-Speed CD-RW: MITSUBISHI CHEMICAL CORPORATION TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. The actual number of rewrites to CD-RW is affected by the quality of the disc and the way it is used.
Page 79: Writing Cds/Dvds On Dvd Super Multi Drive
When writing or rewriting Note the following when you write or rewrite a CD-R or CD-RW. Always copy data from the HDD to the CD. Do not use cut-and-paste. The original data will be lost if there is a write error. Do not perform any of the following actions: Change users in the Windows XP operating system.
Page 80 Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
Page 81 DVD+R DL: (Double Layer Recordable drive only) MITSUBISHI CHEMICAL CORPORATION DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version VICTOR COMPANY OF JAPAN.LIMITED MITSUBISHI CHEMICAL CORPORATION DVD+RW: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. DVD-RAM: (DVD Super Multi drive only) DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co., Ltd.
Page 82: When Writing Or Rewriting
DVD-RAM formatted by FAT32 cannot be read in Windows 2000 without DVD-RAM Driver Software. When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive. Be sure to connect the AC adaptor before you write or rewrite. Before you enter standby/hibernation mode, be sure to finish DVD-RAM writing.
Page 83 Always copy data from the hard disk drive to the optical media. Do not use cut-and-paste. The original data will be lost if there is a write error. RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: DVD-Video cannot be created using RecordNow!.
Page 84: Data Verification
3. Mark the Verify data written to the disc after burning check box in the Data Options. 4. Click the OK button. DLA for TOSHIBA Note the following limitations when you use DLA: This software supports only rewritable discs (DVD+RW, DVD-RW, and CD-RW).
Page 85: When Using Windvd Creator Platinum
When using WinDVD Creator Platinum You can record video back to your digital camcorder via i.LINK (IEEE1394) using WinDVD Creator Platinum. However, there is a case where you may find that playback sound is choppy -if this is the case follow the below instructions: 1.
Page 86: Important Information For Use
2. Before recording the video to DVD When you record to DVD discs, please use only media recommended by TOSHIBA. Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fail to write DVD.
Page 87: Media Care
Please verify your disc after recording important data. DVD-R/+R/-RW disc cannot be written in VR format. WinDVD Creator cannot export to DVD-Audio, VideoCD, miniDVD format. WinDVD Creator can write DVD-RAM/+RW in VR format, but the disc may only play on your computer. When writing to DVD disc, WinDVD Creator requires 2GB or more over disk space every one hour of video.
Page 88: Tv Tuner
6. If your CD/DVDs become dusty or dirty, wipe them with a clean dry cloth. Wipe from the center out, do not wipe in a circular direction around the CD/DVD. If necessary, use a cloth dampened in water or a neutral cleaner.
Page 89: Using The Tv Tuner
Using the TV Tuner Antenna The quality of sounds and pictures greatly depends on the radio propagation conditions. When you use your computer in areas where the radio waves are weak, which results in poor radio receiving conditions, contact the dealer you purchased it from, or use a commercially available antenna booster.
Page 90: Precautions When Using Windvr
3. Connect the antenna cable to the other end of the antenna adaptor. Do not connect the Antenna adaptor to the DC 15V IN jack. When you have been using a descrambler to receive the programs on cable TV or satellite broadcasting, connect the descrambler to the antenna cable.
Page 91 Operating Basics When the CPU load increases during recording or playing sessions, a time lag between video and audio may occur. In these cases, exit WinDVR and all other application and then restart WinDVR. The video may skip or stop when a shock or vibration is applied to your computer during recording or playing sessions.
Page 92: Sound System
Sound System Using the microphone Your computer has a built-in microphone that can be used to record monaural sounds into your applications. It can also be used to issue voice commands to applications that support such functions. Since your computer has a built-in microphone and speakers, “howling” may be heard under certain conditions.
Page 93: Modem
CD by the analog CD audio. Virtual Sound TOSHIBA Virtual Sound works as an audio filter using SRS WOW XT and SRS TruSurround XT functions provided by SRS Labs, Inc. in the United States.
Page 94: Region Selection
Check the specified areas carefully before using it. To select a region, follow the steps below. 1. Click start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Page 95: Modem Selection
Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region.
Page 96 Connection to any communication line other than an analog phone line could cause a PC system failure. Connect the built-in modem only to ordinary analog phone lines. Never connect the built-in modem to a digital line (ISDN). Never connect the built-in modem to the digital connector on a public telephone or to a digital private branch exchange (PBX).
Page 97: Wireless Communications
If this occurs, the outsider may illegally access your system, eavesdrop, or cause the loss or destruction of stored data. TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. User’s Manual...
Page 98: Wireless Communication Switch
Wireless communication switch You can enable or disable Wireless LAN function, with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch to the right to turn it on and to the left to turn it off. Do not use the WiFi or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields.
Page 99: Lan
The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation.
Page 100: Cleaning The Computer
3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub. When the computer is exchanging data with the LAN, the LAN Active indicator glows orange. When the computer is connected to a LAN hub but is not exchanging data, the Link indicator glows green.
Page 101: Heat Dispersal
CPU temperature by turning on the fan first, then if necessary, lowering the CPU speed. Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the Cooling Method item of the Basic Setup tab in TOSHIBA Power Saver. Maximum Performance...
Page 102 Operating Basics 4-30 User’s Manual...
Page 103: Chapter 5 : The Keyboard
Qosmio F20 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.
Page 104: Function Keys: F1
Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
Page 105: Hot Keys
Press Fn + F10 or Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys (Fn + F11) or cursor control keys (Fn + F10). Refer to the how to operate these keys.
Page 106 Continue holding down Fn and press F2 again to change the setting. You can also change this setting through the profile item in TOSHIBA Power Saver. Standby: When you press Fn + F3, the computer enters Standby. To avoid entering Standby unexpectedly, a dialog box appears for verification.
Page 107 The brightness level is always set at the maximum value for about 18 seconds, when the LCD turns on. After 18 seconds, the brightness level will return to the level set within the TOSHIBA Power Saver utility or you can change it manually.
Page 108: Windows Special Keys
Fn key. Fn Sticky key You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an “F number” key. To start the TOSHIBA Accessibility Utility, click start, point to All Programs, point to TOSHIBA, point to Utilities and click Accessibility.
Page 109: Keypad Overlay
Keypad overlay Your computer’s keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the center of the keyboard with gray letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad on the 101/102-key enhanced keyboard.
Page 110: Generating Ascii Characters
Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off. 2.
Page 111: Power
Qosmio F20 Power The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a...
Page 112: Power Indicators
Battery charge adaptor is above low battery trigger connected point Battery charge is below low battery trigger point Battery charge is exhausted No battery installed Power indicators As shown in the above table, the Battery, DC IN and Power indicators on the system indicator alert you to the computer’s operating capability and battery charge status.
Page 113: Battery Types
DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected: Green Flashing orange No light Power indicator Check the Power indicator to determine the power status: Green Blinking orange No light Battery types The computer has three types of batteries: Battery pack High Capacity Battery Pack (optional)
Page 114 Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. Do not remove the battery pack while the computer is in Standby Mode. Data is stored in RAM, so if the computer loses power it will be lost.
Page 115: Care And Use Of The Battery Pack
Refer to Chapter 10 The computer’s RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.
Page 116 3. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or a fire, and could also damage the battery pack. Always wrap the battery pack in plastic (or place it in a plastic bag) whenever transporting it, to avoid exposing the terminals to another conductive object which could result in serious injury.
Page 117 Do not turn on the PC’s power again until an authorized Toshiba service provider has checked it for safety. Continued use could cause a fire or rupture possibly resulting in serious injury or PC failure including but not limited to the loss of data.
Page 118: Charging The Batteries
The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger.
Page 119: Battery Charging Notice
Time The following table shows the approximate time required to fully charge a discharged battery. Battery type Battery pack (4400mAh) High Capacity Battery Pack (8800mAh) about 4.5 RTC battery The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer.
Page 120: Monitoring Battery Capacity
Therefore, an often used, older battery will not operate for as long as a new battery even when both are fully charged. In this case, TOSHIBA Power Saver will indicate a 100% charge for both the old and new battery, but the displayed estimated time remaining will be shorter for the older battery.
Page 121: Retaining Data With Power Off
Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Battery type Battery pack (4400mAh) High Capacity Battery Pack (8800mAh) RTC battery Extending battery life To maximize the life of your battery pack: At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.
Page 122: Replacing The Battery Pack
Replacing the battery pack The battery pack is classed as a consumable item as its operating life will gradually decrease as it is continually charged and discharged. When the battery pack reaches the end of its operating life you will need to install a new one - this status is usually indicated if the Battery indicator flashes orange shortly after fully recharging the battery.
Page 123: Toshiba Password Utility
User password To start the utility, point to or click the following items: start -> All Programs -> TOSHIBA -> Utilities -> Password Utility Set (button) Click this button to register a password of up to 50 characters. After a password is set, you will be prompted to enter it when you start the computer.
Page 124: Starting The Computer By Password
To set a supervisor password, follow the steps below. 1. Click start. 2. Click Run. 3. Enter the following: C:\Program Files\Toshiba\Windows Utilities\SVPWTool\TOSPU.EXE If you set a supervisor password, some functions might be restricted when a user logs on with the user password.
Page 125: Power-Up Modes
Chapter 3, Windows utilities You can configure various settings associated with both Standby Mode and Hibernation Mode within TOSHIBA Power Saver. Hot keys You can use hot keys Fn + F3 to enter Standby mode and Fn + F4 to enter Hibernation.
Page 126 Power 6-16 User’s Manual...
Page 127: Chapter 7 : Hw Setup
Qosmio F20 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer and how to setup the Execute-Disable Bit Capability. Accessing HW Setup To run HW Setup, click start, click Control Panel, click Printers and Other Hardware and select TOSHIBA HW Setup.
Page 128: Power On Display
General This window displays the BIOS version and contains two buttons: Default and About. Default About Setup This field displays BIOS Version and date. Display This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor. Power On Display Lets you select the display to be used when the computer is booted - this setting is only available with standard VGA modes and cannot be...
Page 129: Boot Priority
Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select from the following settings: HDD −> FDD −> CD-ROM −> LAN FDD −> HDD −> CD-ROM −> LAN HDD −> CD-ROM −> LAN −> FDD FDD −>...
Page 130 To change the boot device, follow the steps below. 1. Hold down F12 and boot the computer. 2. The following menu will be displayed with the following icons: Built-in HDD, CD-ROM, floppy disk drive, Network (LAN) boot. A bar will appear only under the selected device. 3.
Page 131: Device Config
This function lets you set the CPU operating mode. This option is only displayed on those models that use a Pentium-M processor. Dynamic CPU Frequency Mode This option lets you choose from the following settings: Dynamically Switchable Always High Always Low Built-in LAN This feature enables or disables the Built-in LAN.
Page 132 PCI Express Link ASPM This feature lets you set the PCI Express power-saving configuration. Enabled Disabled Auto USB KB/Mouse Legacy Emulation Use this option to enable or disable USB keyboard/mouse legacy emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the USB KB/Mouse Legacy Emulation item to Enabled.
Page 133: Configuring The Execute-Disable Bit Capability
Notes before using the BIOS Setup In most cases, changes to the system’s configuration should be made within Windows by using applications such as TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Windows Device Manager and so forth. If you make changes to the configuration through the BIOS setup program, please be aware that the configuration set through the Windows applications will take priority.
Page 134 Available Not Available System configuration changes, other than changes to this setting, should be made within Windows by using applications such as TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Windows Device Manager and so forth. Makes the Execute-Disable Bit Capability useable (Available).
Page 135: Windows Xp Home Edition
Qosmio F20 Using the Remote Controller, Front operation button and QosmioPlayer This chapter explains how to use the Remote Controller on Windows XP Media Center Edition and Windows XP Home Edition models as well as provides information about QosmioPlayer. The state where Windows XP is active is referred to as Windows mode, whereas the state where QosmioPlayer is active is referred to as QosmioPlayer mode.
Page 136: Front Operation Button Function
Front operation button function This section describes the functions of the front operation button for both Windows mode and QosmioPlayer mode. Please do not press the button too strenuously. Windows mode Eleven buttons are available for use: TV, CD/DVD, Play/Pause, Stop, Previous, Next, Record, Brightness down, Brightness up, Display, TV-out.
Page 137 TOSHIBA Controls properties. To access the TOSHIBA Controls properties, click start, click the Control Panel, click Printers and the Software and select the TOSHIBA Controls icon. Pressing this button to decrease the brightness of the built-in LCD. The button setting can be changed in TOSHIBA Controls properties.
Page 138: Remote Controller
Function comparison list for TV/DVD/CD software Icon Front operation button CD/DVD Play/Pause Stop Previous Next Brightness (-) Brightness (+) Display TV-out Remote Controller This computer includes a TV Remote Controller which enables you to perform some functions of your computer from a distant location. Part Names of Remote Controller The following figure shows the buttons on the Remote Controller.
Page 139 Refer to the use the Remote Controller as well as how to install and remove its batteries. Input switching Time shift Replay Numbers Option selection Arrows Set up Record Channel Fast rewind Play/Pause Previous Display User’s Manual Using the Remote Controller Power Angle Remote Controller...
Page 140 Power CD/DVD Input switching Full screen Time shift Replay Brightness Brightness Skip Numbers Option selection DVD Menu Arrows Starts or terminates the operating system, and Terminates QosmioPlayer Play. Starts or terminates Software for TV. Starts QosmioPlayer (TV). Starts Qosmio UI, Windows Media Player, WinDVD, QosmioPlayer (CD), and/or QosmioPlayer (DVD).
Page 141 Set up Back Channel Channel Record Volume + Volume - Mute Play/Pause Fast rewind Fast forward Stop Previous Next Display Angle Subtitle Audio User’s Manual Executes the selected option (works the same as the Enter key). Displays or hides the Settings Menu while watching TV or replaying DVD’s.
Page 142: Using The Remote Controller
Using the Remote Controller This computer includes a remote control unit, which allows you to control some of your computer’s functions from a distant location. The Remote Controller is designed specifically for this computer. Some application programs may not support remote control functions. Operational range of the remote control Point the remote control at your computer and press a button.
Page 143 1. Open the Control Panel and click the Printer and Other Hardware icon. 2. Click the TOSHIBA Control option. The Property of the TOSHIBA Control screen appears. 3. In the Remote Control tab, uncheck the Use Remote Control check box.
Page 144: Installing/Removing Batteries
Installing/Removing batteries Be sure to install the dry batteries provided with this product before using the Remote Controller. The procedures for installing and removing the batteries vary depending on the type of the Remote Controller. Check the type and then install or remove the batteries as instructed.
Page 145: Installing The Batteries
Installing the batteries 1. Open the battery cover on the back side of the Remote Controller. Push the tab in the direction of the arrow ( ) to open the cover ( ). Battery cover 2. Insert the batteries in place. Be sure to place the batteries with their polarities (+ and -) in the correct position.
Page 146: Watching The Tv
Replacing the batteries When the batteries in the Remote Controller reach the end of their life, the Remote Controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.
Page 147 [Start] -> [All Programs ] -> [InterVideo WinDVD Creator] -> Click [InterVideo WinDVD Creator] to activate. 3. Select [TOSHIBA PCI TV Tuner Composite] at [Input Source]. 4. Specify the location to save the video to be recorded (imported). 5. The default saving location is at [My Videos] of [My Document]. To save to another location, specify the desired location.
Page 148 12. Select [Burn to Disc] check box on the output destination setting screen and click the [Right arrow] button. 13. The configured output device appears. Check the settings and click the [Right arrow] button. 14. Select [DVD (1 hour)] or [DVD (2 hours)] for the Format (Quality) selection.
Page 149 15. Select [DVD (1 hour)] or [DVD (2 hours)] for the Format (Quality) selection. 16. Click the [Start] button. Burning of video to the DVD begins. 17. The disc tray of the drive automatically opens once writing is complete. Click the [OK] button. 18.
Page 150 Chapter, Using the Remote Controller, Front operation button and QosmioPlayer for details. 1. Insert one end of the VIDEO-IN cable into the VIDEO-IN port of your computer. AV-IN port 8-16 Using Toshiba Picture Enhancement Utility Connecting the VIDEO-IN port in this User’s Manual...
Page 151: Windows Xp Media Center Edition
2. Insert the other end of the VIDEO-IN cable into the output port of the analog device you wish to connect. To hear sounds, use a video cable to connect the sound terminals of the audio device and your computer (red: sound, right channel, white: sound, left channel).
Page 152: Front Operation Button Function
Front operation button function This section describes the functions of the front operation button for both Windows mode and QosmioPlayer mode. Please do not press the button section too strenuously. Windows mode Eleven buttons are available for use: TV, CD/DVD, Play/Pause, Stop, Previous, Next, Record, Brightness down, Brightness up, Display, TV-out.
Page 153 Manual Recording while using Live TV in Media Center. When used within QosmioPlayer, the audio/video recording feature will not function. The button setting can be changed in TOSHIBA Controls properties. To access the TOSHIBA Controls properties, click start, click the Control Panel, click Printers and the Software and select the TOSHIBA Controls icon.
Page 154 Icon Front operation button CD/DVD Play/Pause Stop Previous Next Brightness (-) Brightness (+) Display TV-out 8-20 Windows Media Center Edition Media Center - Media Center - My TV (TV) Play DVD (DVD) Run Media Center and My TV is displayed. Run Media Center and play Run CD/DVD...
Page 155: Remote Controller
Remote Controller This computer includes a TV Remote Controller which enables you to perform some functions of your computer from a distant location. Part Names of Remote Controller The following figure shows the buttons on the Remote Controller. Refer to the descriptions on the next page for the functions of each button.
Page 156 Access indicator My TV Record Rewind Replay Arrows Volume + Volume - Recorded TV Guide Clear 8-22 My music Stop Back Figure 8-10 Remote Controller My pictures Power My videos Pause Play Fast Forward Skip More info Start Channel/Page Mute DVD Menu Live TV Numbers...
Page 157 Power Off state of your computer. To change the setting, click start, select Control panel -> Performance and Maintenance -> TOSHIBA Power Saver -> Setup Action -> Manual Setup. The following five options are available: No action, Ask me what to do, Standby, Hibernate and Shut down.
Page 158 Replay Skip Back More Info Arrows Volume + Volume - Start Channel/Page up(+) and down(-) Mute Recorded TV Guide Live TV DVD Menu 8-24 Moves media backward (seven seconds for videos and live TV, one music track or one DVD chapter at a time).
Page 159: Using The Remote Controller
Numbers Clear Enter Using the Remote Controller This computer includes a remote control unit, which allows you to control some of your computer’s functions from a distant location. The Remote Controller is designed specifically for this computer. Some application programs may not support remote control functions. Connecting the Remote control receiver An infrared receiver, which connects to one of the computer’s USB ports, allows you to Microsoft...
Page 160 1. Connect a provided USB cable to the USB port of the Remote control receiver. 2. Connect the external infrared Remote control receiver to one of the computer’s USB ports. Proceed to Step 3 if you are a subscriber of satellite or CATV. 3.
Page 161: Operational Range Of The Remote Control
Operational range of the remote control Point the remote control at your computer and press a button. The operational angle and distance are described below. Distance Angle Infrared receiver window 30 degrees 15 degrees (vertically) * The appearance of the provided Remote Controller may vary from model to model, and it is not provided with some models.
Page 162: Installing/Removing Batteries
Installing/Removing batteries Be sure to install the dry batteries provided with this product before using the Remote Controller. The procedures for installing and removing the batteries vary depending on the type of the Remote Controller. Check the type and then install or remove the batteries as instructed.
Page 163 Installing the batteries 1. Open the battery cover on the back side of the Remote Controller. Push the tab in the direction of the arrow ( ) to open the cover ( ). Battery cover 2. Insert the batteries in place. Be sure to place the batteries with their polarities (+ and -) in the correct position.
Page 164: Watching The Tv
Replacing the batteries When the batteries in the Remote Controller reach the end of their life, the Remote Controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.
Page 165: Changing Settings
Follow the screen instructions and configure settings according to the environment used. Changing settings Refer to the following procedures to change settings that are already configured. 1. Activate Media Center. 2. Click in the following order: [Settings] -> [TV] -> [Set Up TV Signal]. 3.
Page 166: Starting For Watch The Tv
Chapter, Using the Remote Controller, Front operation button and QosmioPlayer for details. 8-32 Use the bundled AV-IN cable and connect to AV-IN port on the right side of the comuter. Coaxial cable Using Toshiba Picture Enhancement Utility AV cable (sold separately) in this User’s Manual...
Page 167: Qosmioplayer
1. Insert one end of the VIDEO-IN cable into the VIDEO-IN port of your computer. 2. Insert the other end of the VIDEO-IN cable into the output port of the analog device you wish to connect. To hear sounds, use a video cable to connect the sound terminals of the audio device and your computer (red: sound, right channel, white: sound, left channel).
Page 168 Function comparison list for TV/DVD/CD software Icon Front operation button CD/DVD Play/Pause Stop Previous Next Brightness (-) Brightness(+) Display TV-out *1 Every time it is pressed, the mode changes from Show current status in seconds -> Constantly display information -> No display -> Show current status in seconds.
Page 169 R e m o te C o n tro lle r This computer includes a TV Remote Controller which enables you to perform some functions of your computer from a distant location. Part Names of Remote Controller The following figure shows the buttons on the Remote Controller. Refer to the descriptions on the next page for the functions of each button.
Page 170: Remote Controller
Input switching Time shift Numbers Option selection Channel Fast rewind Play/Pause Previous 8-36 Power Replay Arrows Set up Record Display Angle Remote Controller CD/DVD Full screen Skip Brightness DVD Menu Back Volume Mute Fast forward Stop Next Audio Subtitle User’s Manual...
Page 171 Power CD/DVD Input switching Full screen Time shift Replay Brightness Brightness Skip Numbers Option selection DVD Menu User’s Manual Starts or terminates the operating system, and Terminates QosmioPlayer Play. Starts or terminates Software for TV. Starts QosmioPlayer (TV). Starts Qosmio UI, Windows Media Player, WinDVD, QosmioPlayer (CD), and/or QosmioPlayer (DVD).
Page 172 Arrows Set up Back Channel Channel Record Volume + Volume - Mute Play/Pause Fast rewind Fast forward Stop Previous Next Display Angle Subtitle Audio 8-38 Moves the cursor between options. Executes the selected option (works the same as the Enter key). Displays or hides the Settings Menu while watching TV or replaying DVD’s.
Page 173 Functions via the Remote Controller and the keyboard in the QosmioPlayer mode The list shows how the functions available from the keyboard correspond to those available from the Remote Controller in the QosmioPlayer mode. Note that some functions via the Remote Controller in the list may not be supported by the Remote Controller you are using.
Page 174 1 and 0 DVD MENU F8 or F9 Enter 8-40 Select a Select a track 1 channel 1 Select a Select a track 2 channel 2 Select a Select a track 3 channel 3 Select a Select a track 4 channel 4 Select a Select a track 5...
Page 175 SET UP BACK PgUp (Channel) PgDn (Channel) VOL + Ctrl + (Volume) VOL - Ctrl + (Volume) Ctrl + R (Record) MUTE Space Ctrl + Space Ctrl + R Ctrl + S DISPLAY User’s Manual Displays or hides the Settings Menu Menu cancel or hides...
Page 176 ANGLE SUBTITLE AUDIO SELECT F9 or Tab (Option selection) FULL SCREEN Pressing this button once will switch the mode in the order of Non-linear scaling -> Zoom -> Full -> Normal -> Non-linear scaling. Changing the SRS mode of the built-in speaker -> external speaker -> open type headphone ->...
Page 177 Access indicator My TV Stop Record Rewind Replay Back Arrows Volume + Volume - Recorded TV Guide Clear User’s Manual My music My pictures Remote Controller Power My videos Pause Play Fast Forward Skip More info Start Channel/Page Mute DVD Menu Live TV Numbers Enter...
Page 178 Power Off state of your computer. To change the setting, click start, select Control panel -> Performance and Maintenance -> TOSHIBA Power Saver -> Setup Action -> Manual Setup. The following five options are available: No action, Ask me what to do, Standby, Hibernate and Shut down.
Page 179 Back More Info Arrows Volume + Volume - Start Channel/Page up(+) and down(-) Mute Recorded TV Guide Live TV DVD Menu Numbers Clear Enter User’s Manual Displays the previous window. The button provides more details on a TV program than is listed in the Guide. Moves the cursor to navigate within Media Center windows.
Page 180 Functions via the Remote Controller and the keyboard in the QosmioPlayer mode The list shows how the functions available from the keyboard correspond to those available from the Remote Controller in the QosmioPlayer mode. Note that some functions via the Remote Controller in the list may not be supported by the Remote Controller you are using.
Page 181 BACK MORE DOWN RIGHT LEFT Enter VOL + Ctrl + (Volume) VOL - (Volume) Ctrl + START PgUp CH + (Channel) CH - (Channel) PgDn MUTE RECORD TV GUIDE User’s Manual Menu cancel or hides Changes the Changes the screen screen Move the cursor Move the cursor...
Page 182 LIVE TV DVD MENU F8 or F9 1 and 0 CLEAR ENTER 8-48 Starts Terminates QosmioPlayer QosmioPlayer (TV) (CD) -> Starts QosmioPlayer (TV) Terminates Play QosmioPlayer QosmioPlayer (TV) -> Play (CD) QosmioPlayer (CD)/ QosmioPlayer (DVD) Select a channel 1 Select a track 1 Select a channel 2 Select a track 2 Select a channel 3 Select a track 3 Select a channel 4 Select a track 4...
Page 183: Using The Remote Controller
Using the Remote Controller This computer includes a remote control unit, which allows you to control some of your computer’s functions from a distant location. The Remote Controller is designed specifically for this computer. Some application programs may not support remote control functions. Operational range of the remote control Point the remote control at your computer and press a button.
Page 184: Installing/Removing Batteries
Even if within the effective scope as described above, the remote control may malfunction or not work correctly in the following cases. When an obstacle stands between the infrared receiver window of your computer and the Remote Controller. When direct sunlight or strong fluorescent light strikes the infrared receiver window.
Page 185: Type Of Battery That Can Be Used For The Remote Controller
Type of battery that can be used for the Remote Controller When the batteries shipped with the Remote Controller are discharged, replace them with commercially available AA manganese batteries or AA alkaline batteries. Other types or battery should not be used. Installing the batteries 1.
Page 186: Replacing The Batteries
WinDVD and the QosmioEngine feature of QosmioPlayer. Users can select from three video quality modes depending on their preferences for watching videos. A dedicated utility (TOSHIBA Picture Enhancement Utility) running on Windows is developed to allow users to select a mode and a sharpness level.
Page 187: Using Toshiba Picture Enhancement Utility
Selection takes effect when you play a DVD movie or watch TV. Selection will take effect the next time Microsoft Center Edition, InterVideo WinDVD or InterVideo WinDVR is restarted. 1. Select start -> All Programs -> TOSHIBA -> Utilities-> Picture Enhancement Utility. The TOSHIBA Picture Enhancement Utility window appears.
Page 188 Intel GMS TOSHIBA Picture Enhancement Utility on Intel internal graphics system model When using WinDVR to change the setting, please close WinDVR first and then change the setting. Available image quality modes Three image quality modes are available Dynamic: To enjoy a vivid picture...
Page 189 GeForce Go 6600 TOSHIBA Picture Enhancement Utility on nVIDIA GeForce Go 6600 model When using WinDVR to change the setting, please close WinDVR first and then change the setting. Available image quality modes Three image quality modes are available...
Page 190 This function is available InterVideo WinDVD. nVIDIA GeForce Go 6200 TurboCache When using WinDVR to change the setting, please close WinDVR first and then change the setting. 8-56 TOSHIBA Picture Enhancement Utility on nVIDIA GeForce Go 6200 TurboCache™ model User’s Manual...
Page 191 Available image quality modes Three image quality modes are available Dynamic: To enjoy a vivid picture Standard: To enjoy a calm atmosphere in a room Theater: To enjoy a theater like picture in a darkened room Available sharpness levels Three sharpness levels are available: Low, Medium, High Image sharpness is emphasized if a higher level is chosen.
Page 192 Using the Remote Controller, Front operation button and QosmioPlayer 8-58 User’s Manual...
Page 193: Optional Devices
Qosmio F20 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory PC card Bridge media slot SD card Memory Stick/Memory Stick Pro...
Page 194: Pc Card
The computer is equipped with a PC card slot that can accommodate one 5 mm Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC cards.
Page 195: Bridge Media Slot
Removing a PC card To remove the PC card, follow the steps below. 1. Open the Safely Remove Hardware icon on the Task Bar. 2. Point to PC card and click. 3. Press the PC card eject button to extend it. If the PC card is not inserted all the way, the eject button may not pop out.
Page 196: Formatting An Sd Card
TOSHIBA SD memory card format utility, not with the format commands provided within Windows. In order to run TOSHIBA SD memory card format, click start, point to All Programs, point to TOSHIBA, point to Utilities and click SD memory card Format.
Page 197: Removing An Sd Card
Make sure the SD card is oriented properly before you insert it. Do not turn the computer off or switch to Standby Mode or Hibernate Mode while files are being copied - doing so may cause data to be lost. Removing an SD card To remove an SD card, follow the steps below.
Page 198: Sd Card Care
SD card care Set the write-protect switch to the lock position, if you do not want to record data. Do not write to an SD card if the battery power is low. Low power could affect writing accuracy. Do not remove an SD card while read/write is in progress. The SD card is designed so that it can be inserted only one way.
Page 199: Inserting A Memory Stick
Inserting a Memory Stick To insert a Memory Stick, follow the steps below. 1. Insert the Memory Stick into the Bridge media slot. 2. Press gently to ensure a firm connection. Bridge media slot indicator Removing a Memory Stick To remove a Memory Stick, follow the steps below. 1.
Page 200: Xd Picture Card
xD picture card The computer is equipped with a Bridge media slot that can accommodate xD picture cards with various memory capacities. The xD picture card let you easily transfer data from devices, such as digital cameras that use xD picture card flash-memory.
Page 201: Memory Card Care
Memory card care Memory cards are consumable items, so make sure you back up important data. Do not twist or bend memory cards. Do not expose memory cards to liquids or store in humid areas or lay media close to containers of liquid. Do not touch the metal part of a memory card or expose it to liquids or let it get dirty.
Page 202 Make sure the MultiMediaCard is oriented properly before you insert it. Removing a MultiMediaCard To remove a MultiMediaCard, follow the steps below. 1. Open the Safely Remove Hardware icon on the Task Bar. 2. Point to MultiMediaCard and click. 3. Push in the card and release it to pop the card out slightly. 4.
Page 203: Memory Expansion
When you install or remove a memory module, ensure that you do not touch any other internal areas of the computer. Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following...
Page 204: Installing Memory Module
If you install a memory module that is not compatible with the computer, a beep will sound when you turn on the power. If the incompatible module is installed in slot A, there will be a long beep (1 second) followed by one short beep (0.5 seconds), while if the incompatible module is in slot B, there will be a long beep followed by two short beeps.
Page 205 6. Fit the memory module’s connectors into the socket at about a 45 degree angle and push the module down until latches on either side snap into place. Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 45 degree angle before pressing it down until the latches on either side snap into place.
Page 206: Removing Memory Module
Removing memory module To remove the memory module, make sure the computer is in boot mode then: 1. Set the computer to boot mode and turn the computer’s power off. Make sure the Power indicator is off. 2. Remove AC adaptor and all cables connected to the computer. 3.
Page 207: Battery Packs
Battery Packs You can increase the portability of the computer with additional standard or high-capacity battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. Refer to Chapter 6, Power. Universal AC Adaptor If you frequently transport the computer between different sites such as your home and office, purchasing an AC adaptor for each location will...
Page 208: Installing The Hard Disk Drive Pack
5. Lift the cover up and out to remove it. 6. Slide the battery pack to the left and remove the connector from the battery. Lift the connector side of the battery pack and then remove the battery pack from its compartment. Installing the Hard disk drive pack To install the Hard disk drive pack, follow the steps below.
Page 209: Usb Floppy Disk Drive
3. Seat the cover. 4. Secure the cover with a screw. 5. Return your computer to the upright position. USB floppy disk drive USB floppy disk drive accommodates 1.44-megabyte or 720-kilobyte floppy disks. It connects to the USB port. USB connector USB connector Disk-In-Use Indicator...
Page 210: Using The Usb Floppy Disk Drive
Using the USB floppy disk drive USB floppy disk drive connects to the computer’s USB port. It accommodates 1.44-megabyte or 720-kilobyte floppy disks. Connecting USB floppy disk drive To connect the drive, plug the floppy disk drive’s USB connector into a computer’s USB port.
Page 211: External Monitor
External monitor An external analog monitor can be connected to the external monitor port on the computer. The computer supports WXGA video modes. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor cable to the external monitor port. Monitor cable 3.
Page 212: Settings For Display Video On Tv
Installation Connection via the S-Video out port 1. Plug one end of the S-Video out cable into the S-Video out port of your computer. 2. Insert the other end of the S-Video out cable into the S1-/S2 video input of the TV set. You can then either use the computer’s speakers or a set of headphones connected to the headphone jack to get sound.
Page 213: Displaying Movies On A Tv Or Crt
Settings for Intel internal graphics system model If a television is connected to the computer, set the TV type in Display Properties. Follow the steps below. 1. Click start and click Control Panel. 2. Double-click the Display icon to open the Display Properties window. 3.
Page 214: Video-In
There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.
Page 215 If you are transferring data through an IEEE1394 hub, do not connect or disconnect other devices from the hub during data transfer. There is a likelihood that data will be damaged. Connect all devices to the hub before you turn on the computer’s power. You may not use any copyrighted video or music data copied from a video camera except for your personal enjoyment.
Page 216: Bluetooth Sd Card3
Bluetooth SD Card3 Bluetooth SD card is an optional accessory compatible with the SD card slot of this computer. You can buy the card from TOSHIBA dealer. Bluetooth USB Adaptor A Bluetooth adaptor that has a USB connector. Wireless communications can be carried out with Bluetooth-compatible equipment by connecting to the USB port of the computer.
Page 217: Troubleshooting
Qosmio F20 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
Page 218: Preliminary Checklist
Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. Make sure you turn on all peripheral devices before you turn on the computer.
Page 219: Hardware And System Checklist
Hardware Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your PC. Use of incompatible devices may cause injury or may damage your PC.
Page 220: Self Test
This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: The computer stops and does not proceed to display information or messages except the Qosmio logo.
Page 221: Ac Power
AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, Problem AC adaptor doesn’t power the computer (DC IN indicator does not glow green) Battery If you suspect a problem with the battery, check the DC IN indicator as well as the Battery indicator.
Page 222: Real Time Clock
Fully discharge the battery, then try to charge it again. Check the power consumption settings in TOSHIBA Power Saver utility. Consider using a power saving mode. Procedure The RTC battery charge has expired. Set the...
Page 223: Internal Lcd Display Panel
Internal LCD display panel Apparent LCD problems may be related to the computer’s setup. Refer to Chapter 7, Problem No display Markings appear on the LCD screen. Problems above remain unresolved or other problems occur Hard disk drive Problem Computer does not boot from hard disk drive Slow performance...
Page 224 DVD-ROM&CD-R/RW drive For more information, refer to Chapter 4, Problem You cannot access a CD/DVD in the drive Some CD/DVDs run correctly, but others do 10-8 Operating Procedure Make sure the drive’s disc tray is securely closed. Press gently until it clicks into place. Open the disc tray and make sure the CD/DVD is properly seated.
Page 225: Dvd Super Multi Drive
User’s Manual Procedure If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA. Do not use the mouse or keyboard during writing. Use only the software supplied with the computer for recording.
Page 226 Some CD/DVDs run correctly, but others do USB floppy disk drive The USB floppy disk drive is available only as an option. For more information, refer to Chapter 4, Problem Drive does not operate There may be a faulty cable connection. Check You cannot access the external USB floppy disk drive...
Page 227 SD card Refer also to Chapter 9, Problem SD card error occurs You cannot write to an SD card You cannot read a file Memory Stick/Memory Stick Pro Refer also to Chapter 9, Problem Memory Stick/Memory Stick Pro error occurs You cannot write to an Memory Stick/Memory Stick Pro...
Page 228: Infrared Receiver Window
MultiMediaCard Refer also to Chapter 9, Problem MultiMediaCard error occurs You cannot write to an MultiMediaCard You cannot read a file Infrared receiver window Refer also to the documentation for your infrared compatible device and related software. Problem Infrared devices do not work as expected Pointing device If you are using a USB mouse, also refer to the USB section in this chapter...
Page 229: Usb Mouse
Problem The mouse pointer moves too fast or too slow The reaction of Touch pad is either too sensitive or not sensitive enough. USB mouse Problem On-screen pointer does not respond to mouse operation Double-clicking does not work User’s Manual Procedure Try changing the speed setting in the mouse control utility.
Page 230 Problem The mouse pointer moves too fast or too slow The mouse pointer moves erratically Refer also to your USB device’s documentation. Problem USB device does not work 10-14 Procedure Try changing the speed setting in the mouse control utility. 1.
Page 231 Memory expansion Refer also to Chapter 9, memory modules. Problem Beep sounds. (Two beeps, a dash and a dot, for a defective memory module in slot A. Three beeps, a dash and two dots for slot B. When both beeps sound, both memories in slot A and B are defective.)
Page 232 External monitor Refer also to Chapter 9, documentation. Problem Monitor does not turn No display Display error occurs Modem Problem Communication software can’t initialize modem You can hear a dial tone but can’t make a call You place a call, but a connection can’t be made After making a call you...
Page 233: Tv Output Signal
Problem Character display becomes garbled during a communication You cannot receive an incoming call Problem Cannot access LAN Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Problem...
Page 234: Video Playback
i.LINK (IEEE1394) Problem i.LINK device does not function Video Playback Problem DVD does not play smoothly when using the Windows Media Center Edition of the DVD playing software 10-18 Procedure Make sure the cable is securely connected to the computer and to the device. Make sure the device’s power is turned on.
Page 235: Disposing Of Pc And Pc Batteries
Disposing of PC and PC batteries Discard this PC in accordance with ordinances or rules of local regulations. For further information, contact your local government. This PC contains rechargeable batteries. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them.
Page 236: Toshiba Support
TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
Page 237: Cpu
Qosmio F20 Disclaimers This chapter states the Disclaimer(s) information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Disclaimer description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual.
Page 238: Specific Main Memory Disclaimer/Statement
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
Page 239: Hdd Drive Capacity
HDD Drive Capacity 1 Gigabyte (GB) means 1000 × 1000 × 1000 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 1024 × 1024 × 1024 = 1,073,741,824 bytes, and therefore may show less storage capacity.
Page 240: Non-Applicable Icons
Non-applicable Icons Certain notebook chassis are designed to accommodate all possible configurations for an entire product series. Therefore, please be aware that your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis.
Page 241: Specifications
Qosmio F20 Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Weight (typical) Size Environmental Requirements Conditions Operating Non-operating Thermal Gradient Wet-bulb temperature Conditions Operating Non-operating Power Requirements AC adaptor Computer User’s Manual Appendix A 4.45 kilograms, configured with: Pentium-M processor, 15.4"...
Page 242 Built-in Modem Network control unit (NCU) Type of NCU Type of line Type of dialing Control command Monitor function Communication specifications Communication system Communication protocol Communication speed Transmitting level Receiving level Input/output impedance Error correcting Data compression Power supply Telephone line (analog only) Pulse Tone AT commands...
Page 243: Display Controller And Modes
Qosmio F20 Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. The display controller supports VGA, SVGA and XGA modes on the internal LCD display panel. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at 16 M colors.
Page 244 Video Type mode 0, 1 Text 2, 3 Text 0*, 1* Text 2*, 3* Text 0+, 1+ Text 2+, 3+ Text 4, 5 Grph Grph Text Text Table1 Video modes (VGA) Resolution Character matrix (pels) 40 × 25 8 × 8 Characters 80 ×...
Page 245 Table1 Video Type mode Grph Grph Grph Grph Grph Grph Grph User’s Manual Video modes (VGA) continued Resolution Character matrix (pels) 320 × 200 8 × 8 Pels 640 × 200 8 × 8 Pels 640 × 350 8 × 14 Pels 640 ×...
Page 246 Table 2 Video modes Intel internal graphics system model (WXGA) Vertical Frequency can be set up when outputting to External Monitor. The screen may not be displayed properly in high resolution mode while running 3D applications, during DVD playback, etc. Reduce the resolution until the screen is displayed properly in such cases.
Page 247 Table 2 Video modes Intel internal graphics system model (WXGA) Vertical Frequency can be set up when outputting to External Monitor. The screen may not be displayed properly in high resolution mode while running 3D applications, during DVD playback, etc. Reduce the resolution until the screen is displayed properly in such cases.
Page 248: Video Modes
Table 2 Video modes Intel internal graphics system model (WXGA) Vertical Frequency can be set up when outputting to External Monitor. The screen may not be displayed properly in high resolution mode while running 3D applications, during DVD playback, etc. Reduce the resolution until the screen is displayed properly in such cases.
Page 249 Table 3 Video modes nVIDIA GeForce Go 6200 TurboCache™ model or GeForce Go 6600 model (WXGA) Vertical Frequency can be set up when outputting to External Monitor. The screen may not be displayed properly in high resolution mode while running 3D applications, during DVD playback, etc. Reduce the resolution until the screen is displayed properly in such cases.
Page 250 Table 3 Video modes nVIDIA GeForce Go 6200 TurboCache™ model or GeForce Go 6600 model (WXGA) continued Vertical Frequency can be set up when outputting to External Monitor. The screen may not be displayed properly in high resolution mode while running 3D applications, during DVD playback, etc. Reduce the resolution until the screen is displayed properly in such cases.
Page 251 Table 3 Video modes nVIDIA GeForce Go 6200 TurboCache™ model or GeForce Go 6600 model (WXGA) continued Vertical Frequency can be set up when outputting to External Monitor. The screen may not be displayed properly in high resolution mode while running 3D applications, during DVD playback, etc. Reduce the resolution until the screen is displayed properly in such cases.
Page 252: Powermizer
PowerMizer The PowerMizer function is only available in nVIDIA models. PowerMizer is a graphics processor installed on this computer. The performance of PowerMizer can be configured in three ways. To define the performance, select the menu options shown below: Display Properties -> Settings -> Advanced -> GeForce Go 6600 tab or GeForce Go 6200 TurboCache™...
Page 253: Wireless Lan
Qosmio F20 Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor Compatibility Network Operating System Media Access Protocol Data Rate * The Transmit Rate (at X Mbit/s) is the theoretical maximum speed under the IEEE802.11 (a/b/g) standard.
Page 254: Supported Frequency Sub-Bands
Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
Page 255 Wireless IEEE 802.11 Channels Sets (Revision B and G) Frequency Range Channel ID Wireless IEEE 802.11 Channels Sets (Turbo Mode* Frequency Range Channel ID When installing Wireless LAN cards, the channel configuration is managed as follows: For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point.
Page 256 Wireless IEEE 802.11 Channels Sets (Revision A) Frequency Range Channel ID* *1 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used. *3 These channels are available to Atheros 11g module type only. *4 Available Area: US (USA, CANADA) only.
Page 257: Ac Power Cord And Connectors
Qosmio F20 AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Wire size:...
Page 258 AC Power Cord and Connectors For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.
Page 259: Usage Restrictions
This configuration is designed to work with a signal from a conventional (standard or analog) TV antenna. TOSHIBA does not guarantee that signals received by satellite or cable TV receivers will work properly and does not provide technical support for them.
Page 260 Usage Restrictions User’s Manual...
Page 261: If Your Computer Is Stolen
What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: Fill in the TOSHIBA Theft Registration form (or a copy of it) below. Attach a copy of your receipt showing where your computer was purchased.
Page 262: Toshiba Theft Registration
TOSHIBA Theft Registration Send to: Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Qosmio F10) Model number: (e.g. PSA50 YXT) Serial number: (e.g. 12345678G) Date stolen: Owner’s details Last name, first name: Company: Street: Postal Code/City:...
Page 263 Qosmio F20 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc Read Only Memory CD-RW: Compact Disc ReWritable...
Page 264 I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock...
Page 265 ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements. antistatic: A material used to prevent the buildup of static electricity. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
Page 266 byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory.
Page 267 compatibility: 1) The ability of one computer to accept and process data in the same manner as another computer without modifying the data or the media upon which it is being transferred. 2) the ability of one device to connect to or communicate with another system or component.
Page 268 default: The parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value. delete: To remove data from a disk or other data storage device. Synonymous with erase. device driver: A program that controls communication between a specific peripheral device and the computer.
Page 269 (FDD): An electromechanical device that reads and writes to floppy disks. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
Page 270 Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
Page 271 IrDA 1.1: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps. jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K: Taken from the Greek word kilo, meaning 1000;...
Page 272 microprocessor: A hardware component contained in a single integrated circuit that carries out instructions. Also called the central processing unit (CPU), one of the main parts of the computer. mode: A method of operation, for example, the boot mode, standby mode or the hibernation mode.
Page 273 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that lets you set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
Page 274 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to.
Page 275 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
Page 276 window: A portion of the screen that can display its own application, document or dialog box. Often used to mean a Microsoft Windows window. Wireless LAN: Local Area Network (LAN) through wireless communication. write protection: A method for protecting a floppy disk from accidental erasure.
Page 277 Display, 1-7, 2-8 automatic power off, 1-11 brightness decrease, 5-5 brightness increase, 5-5 controller, B-1 hinges, 2-8 opening, 3-9 DLA for TOSHIBA, 1-15, 4-12 Documentation list, 1-3 DVD Super Multi drive, 1-7 location of slot, 2-4 problems, 10-9 using, 4-2 writing, 4-7 DVD-ROM&CD-R/RW drive, 1-6...
Page 278 Fn + Ctrl (enhanced keyboard’s simulation), 5-3 Fn + Enter, 5-3 Fn + Esc (sound mute), 5-3 Fn + F1 (instant security), 5-4 Fn + F10 (Arrow mode), 5-3 Fn + F11 (Numeric mode), 5-3 Fn + F12 (ScrLock), 5-3 Fn + F2 (power save mode), 5-4 Fn + F3 (standby), 5-4 Fn + F4 (hibernation), 5-4...
Page 279 Keyboard, 1-7, 5-1 emulating keys on enhanced, 5-2 F1 ... F12 function keys, 5-2 Fn Sticky key, 5-6 hot keys, 5-3 typewriter keys, 5-1 Windows special keys, 5-6 Keypad overlay, 1-12, 5-7 arrow mode, 5-7 numeric mode, 5-7 temporarily using normal keyboard (overlay on), 5-8 temporarily using overlay (overlay off), 5-8...
Page 280 5-3 Stereo speakers, 2-8 Volume control, 2-9 Standby, 1-13 setting, 3-11 System automatic, 1-12 TOSHIBA PC Diagnostic Tool, 1-15 TOSHIBA Power Saver, 1-13 TOSHIBA support, 10-20 TOSHIBA Theft Registration, F-2 TOSHIBA Zooming Utility, 1-14 Touch Pad, 1-8...
Page 281 TV Tuner, 1-9, 4-16 TV, 9-19 Universal AC Adaptor additional, 9-15 USB, 1-8 problems, 10-14 USB floppy disk drive, 9-17 using, 9-18 Video modes, B-1 Video RAM, 1-5 Volume control, 2-9 User’s Manual Wireless communication, 4-25 indicator, 2-2 switch, 2-2, 4-26 Wireless communication switch indicator, 4-26 Wireless LAN, 1-10, 4-25...
Page 282 Index Index-6 User’s Manual...

This manual is also suitable for:

Qosmio f20-111 Qosmio f20-159 Qosmio f20-gs1 Qosmio f20

Toshiba Qosmio F20-110 User Manual

Qosmio F20

Chapter 1 Introduction

Chapter 2 : the Grand Tour

Chapter 3 Getting Started

Chapter 4 Operating Basics

Chapter 5 : the Keyboard

Chapter 6 Power

Chapter 7 : HW Setup

Chapter 8 : Using the Remote Controller, Front Operation Button and

Chapter 9 Optional Devices

Chapter 10 Troubleshooting

Chapter 11 : Disclaimers

Appendix A : Specifications

Appendix B : Display Controller and Modes

Appendix C : Wireless LAN

Appendix D : AC Power Cord and Connectors

Appendix E : Usage Restrictions

Toshiba Theft Registration/Touch Pad

Quick Links

Chapters

Related Manuals for Toshiba Qosmio F20-110

Summary of Contents for Toshiba Qosmio F20-110