Write the model and serial numbers here: Model # _________________ Serial # _________________ You can find them under the lid of the washer. GE is a trademark of the General Electric Company. Manufactured under trademark license. 49-3000255 Rev 0 10-20 GEA...
Page 2
THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME. Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family. We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you will too.
Page 3
IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE To reduce the risk of death, fire, explosion, electric shock, or injury to persons when using WARNING your appliance, follow basic precautions, including the following: Read all instructions before using the appliance. Follow all fabric care instructions and warnings to prevent melting of garments or damage to the appliance.
Page 4
Optional drain hose extension recommended for discharging heights from 60” - 96”. GE Appliances strongly recommends the use of factory specified parts. A list of factory hoses available for purchase are listed. These hoses are manufactured and tested to meet GE Appliances specifications.
Getting started To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY WARNING INFORMATION before operating this appliance. Throughout this manual, features and appearance may vary from your model. Controls DeepClean DeepClean 49-3000255 Rev 0...
Page 6
Getting started DeepClean Fill Soak Wash Rinse Spin Pause Lid Locked EXTRA RINSE START / PAUSE Select when adding Fabric Softener Hold 3 Sec to Stop Water Level Temperature COLORS HIGH COLD NORMAL COLD COOL WHITES DELICATES AUTO COLORS BULKY ITEMS SPEED WASH WARM BEDDING/TOWELS...
Page 7
Getting started Medium Precise Fill Large Medium Super Small Precise Fill Large Medium Super Small Precise Fill Regular Large Precise Fill Small 49-3000255 Rev 0...
Page 8
Getting started Step 1 Step 3 Step 2 Step 4 • Add fabric softener to the • Loosely add items around • Close lid. • Press fabric softener dispenser agitator or Infusor. Overloading Start. NOTE: Unit will not start (on some models); see may negatively impact wash with lid open if Precise Fill/ page 14.
Page 9
Getting started Wash Cycles-Cycle Selector Knob - For models GTW540, GTW525, GTW500, GTW490, GTW485, GTW480, GTW465, GTW460, GTW340, GTW335, GTW330, GTW220 & HTW240 only. The wash cycle controls the type of washing process. The cycle selector knob can be turned in either direction. Turning the knob after starting a cycle will stop the washer and change the cycle/options to the new selection.
Page 10
Getting started Wash Cycles-Cycle Selector Knob - Continued - For models GTW540, GTW525, GTW500, GTW490, GTW485, GTW480, GTW465, GTW460, GTW340, GTW335, GTW330, GTW220 & HTW240 only. Items to Wash Cycle Wash Temp Soil Spin Options Available Cycle Details Level Selection (Duration) Wet load of items.
Page 11
Getting started Wash Cycles-Cycle Selector Knob - Continued - For models GTW540, GTW525, GTW500, GTW490, GTW485, GTW480, GTW465, GTW460, GTW340, GTW335, GTW330, GTW220 & HTW240 only. CAUTION Failure to follow these instructions may result in injury or property damage. For Waterproof, Water-Resistant, or Bulky Items: •...
Page 12
Getting started Settings Select settings for agitation (Soil) and water temperature (Temp). NOTE: Longer Spin times typically reduce dryer time/energy usage (i.e. reduces total energy when using both a washer and a dryer). Cycle Options (on some models) Stain PreTreat The Stain PreTreat feature allows you to indicate what stains are on the garments in your load.
Page 13
Lid Locked light will flash if 3 cycles have been started without opening the lid. The washer will not start another cycle until the lid is opened. Try opening, then closing the lid and starting a new cycle. If the problem persists, call GE Appliances at 800.GE.CARES (800.432.2737) for service. 49-3000255 Rev 0...
Page 14
Getting started Automatic Load Sensing This determines the correct agitate profile, agitate duration and amount of water suited to the size and type of load placed in the washer. The washer will not start the wash cycle or fill with water if the lid is open. When the lid is closed the machine is able to begin filling with water in order to sense the load size.
Always follow fabric manufacturer’s care label when laundering. Proper Use of Detergent Using too little or too much detergent is a common cause GE Appliances recommends the use of High Efficiency of laundry problems. detergents such as in your energy efficient washer.
GE Appliances Connected Home Support at 800.220.6899. If compatible: To connect this appliance to the internet you will need to purchase a GE Appliances Please visit www.GEAppliances.com/connect to learn ConnectPlus and attach the module to your appliance more about connected appliance features, to learn through the communication port in the appliance.
Care and cleaning WARNING - Electrical Shock Hazard Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel – DO NOT contact the following parts while the appliance is energized: Drive Motor, Lid Lock, Water Valves, Drain Pump and Recirculation Pump.
Installation Washer Instructions If you have any questions, call GE Appliances at 800.GE.CARES (800.432.2737) GEAppliances.com or visit our Website at: In Canada, call 800.561.3344 www.GEAppliances.ca or visit TOOLS REQUIRED FOR BEFORE YOU BEGIN WASHER INSTALLATION Read these instructions completely and carefully.
Page 19
Installation Instructions IMPORTANT: Minimum Installation Clearances LOCATION OF YOUR WASHER - Alcove or Closet DO NOT Install the Washer: • If your washer is approved for installation in an alcove or 1. In an area exposed to dripping water or outside closet, there will be a label on the back of the machine weather conditions.
Page 20
Installation Instructions CONNECT DRAIN HOSE TO CONNECT WATER HOSES TO WASHER WASHER Remove the cap from the drain port, if present, before Unplug electrical cord before installing water hoses. If installing the drain hose. It is normal for a small amount not installed, install rubber washer in one end of hot of residual water from the factory quality test process to water hose.