Table of Contents
Advertisement
Note
Place the machine in a secure and raised position
In order to obtain easy and safe access to the underside of the machine, place it in a secure and
raised position.
Standing under suspended loads
If the lifting gear or load handling attachments were to fail, the machine could fall. This can
result in death, serious injury or material damage.
● Never remain under or in the immediate vicinity of the machine when it is raised.
5.3.8
Putting the machine down
Requirements
The following preconditions must be satisfied before setting down the machine at the
installation location:
● The mating faces must be clean.
● The anti-corrosion protection paint has been removed from the mating faces, such as the
●
Setting down the machine
● Set down the machine slowly and carefully at the installation location to avoid any impact.
See also
Draining condensation (Page 60)
SIMOTICS FD 1LM1
Operating Instructions 01/2019
DANGER
machine mounting feet, flange, ...
There is no condensation present within the machine.
5.3 Lift the machine to where it will be installed, and position it
Assembly
59
Advertisement
Table of Contents
