Table of Contents
Advertisement
M.2 solid-state drive
Two M.2 solid-state drive connectors are available on the system board. The connector labeled SSD2 (near
the processor) fits only 22mm x 80mm M.2 solid-state drives. The connector labeled SSD1 (on the right side
of the board) fits both 22mm x 80mm and 22mm x 30mm M.2 solid-state drives.
For a list of available solid-state drives, see
To remove the M.2 solid-state drive:
1.
Prepare the computer for disassembly (see
2.
Remove the rear port cover (see
3.
Remove the stand (see
4.
Remove the access panel (see
5.
Remove the Phillips screw (1) that secures the drive to the computer.
6.
Pull the drive away to remove it from the socket (2).
To install the solid-state drive, reverse the removal procedures.
Mass storage devices on page
Preparing to disassemble the computer on page
Removing the rear port cover on page
Stands on page
19).
Access panel on page
9.
18).
20).
18).
M.2 solid-state drive
25
Hide quick links:
Advertisement
Table of Contents
