Contents Before Using the Product Precautions and Notes Safety Precautions Read After Installing the product Electricity and Safety Picture sizes and input signals Supported Resolutions for UHD Input Signals Installation Operation If Input Signal Plus is set to Off Cleaning If Input Signal Plus is set to On Correct posture to use the product Read Before Connecting a Computer (Supported Resolutions)
Do not disconnect the power cord while the product is being used. ● Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. ● Keep the power socket where the power cord is connected unobstructed.
Page 4
Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place. –...
Page 5
Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered – the product. Then contact Samsung Customer Service Centre. ● Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
Page 6
Cleaning High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product (Service fee will be "...
Preparations Installation Attaching the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing " downwards. Disassembly is the reverse order of assembly. " S27CM50* / S32CM50* Put the stand base onto the stand neck Tightly fasten the connecting screw at As shown in the figure, remove the as the direction shown in the figure.
Page 8
S27CM70* / S32CM70* Put the stand base onto the stand neck Tightly fasten the connecting screw at As shown in the figure, remove the as the direction shown in the figure. the bottom of the stand base. Fasten product and foam cushion, and then Check that the stand neck is firmly the large screw in the middle for place the product on the table with its...
Page 9
S27CM80* / S32CM80* / S27C90* Put the stand base onto the stand neck Tightly fasten the connecting screw at As shown in the figure, remove the as the direction shown in the figure. the bottom of the stand base. product and foam cushion, and then Check that the stand neck is firmly place the product on the table with its connected.
Connecting the camera to the product Camera Specifications M7/M8 series S9 series 1920 x 1080, 30 fps (FHD) 3840 x 2160, 30 fps (UHD) Resolution Automatic light compensation Privacy Cover 85° 90° Viewing angle USB Type-C (USB 2.0) USB Type-C (USB 3.0) Connection Before using the product, use a soft dry cloth to wipe the camera connector, to prevent malfunction due to foreign matter.
Precautions for moving the product The colour and shape of parts may differ from what is shown. " S27CM50* / S32CM50* Hold the lower corners or edges of the Do not directly apply pressure on the Do not hold the product upside down product when moving it.
Page 12
S27CM80* / S32CM80* / S27C90* Hold the lower corners or edges of the Do not directly apply pressure on the Do not hold the product upside down product when moving it. screen. only by the stand. Do not hold the screen when moving the product.
Checking the space around the product Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product. The exterior may differ depending on the product.
Adjusting the Product Tilt and Height The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to " improve quality. S27CM50* / S32CM50* ● The product tilt and height can be adjusted.
Page 15
Caution The Product shape may differ depending on the model. " S27CM70* / S32CM70* / S27CM80* / S32CM80* / S27C90* model only. " ● Grasp the centre of the monitor and adjust the height. ● Do NOT hold the stand moving part with your hand when leveling the screen. Your hand may get hurt. ●...
Rotating the Product The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to " improve quality. S27CM70* / S32CM70* / S27CM80* / S32CM80* / S27C90* model only. " S27CM70* / S32CM70* -92°...
Page 17
S27CM80* / S32CM80* / S27C90* -92° (±2.0°) ~ +92.0° (±2.0°) You can rotate your product as shown below. ● Be sure to fully extend the stand before rotating the product. ● If you rotate the product without fully extending the stand, the corner of the product may hit the floor and get damaged. ●...
Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. " The locking device shape and locking method depend on the manufacturer. Refer to the manuals provided with your anti- " theft locking device for details. S27CM50* / S32CM50* model only.
Samsung is not liable for these kinds of accidents. ● Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. ●...
Control Panel You can turn on the product with the Power button, and then use the Control menu. The Control menu appears when the " Power button is pressed while the product is On. S27CM50* / S32CM50* S27CM70* / S32CM70* S27CM80* / S32CM80* <Rear>...
Page 21
The colour and shape of parts may differ from what is shown. ● The screen may dim if the protective film on the SAMSUNG logo or the bottom of the product is not detached. Please remove the protective film. ●...
Connections Using various connectors, you can also connect external devices. Ports The functions available may vary depending on the product model. The colour and shape of parts may differ from what is " shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. S27CM50* / S32CM50* Port Description...
Page 23
S27CM70* / S32CM70* S27CM80* / S32CM80* Camera Port HDMI DC 20V Port Description ● Connects to a source device using a USB Type-C cable. When connecting a USB Type-C source device, make sure to use the USB Type-C 3.1 Gen2 10G cable so that the screen is displayed properly.
Page 24
S27C90* Camera Port Port Description Connect to a source device using a Thunderbolt™ 4 cable or USB Type-C cable. ● is Thunderbolt™ 4 upstream port. With max 90 W PD output. " To connect to a PC via Thunderbolt, connect the cable to the port, one of the four USB "...
When connecting an external device that exceeds the charging capacity of the Thunderbolt™ 4/USB-C port, be sure to use " the adapter dedicated to the device. (For charging capacities for each port, see the product specifications in the Samsung website (http://www.samsung.com).
Connecting the Product to a PC as a USB HUB This function is supported on the S9 series only. " Using the product as a hub, connect and use various source devices with the product at a time. To detect and start a USB device (USB memory, Keyboard, Mouse, etc.) faster, connect the USB device to the port on "...
Tidying Up the Connected Cables S27CM50* S32CM50* S27CM70* S32CM70* Connect the corresponding cables. Pull the right side of the HOLDER-STAND CABLE to remove from the stand. The left side of the cable can be damaged when pulled forcibly. Put both cables in the cable holder on the stand (HOLDER-STAND CABLE) to organise the cables, as shown in the figure. Assembly is complete.
Precautions and Notes You can get instructions and information that you must read after installation. Read After Installing the product Read this information after installing the product. Picture sizes and input signals Picture Size is applied to the current source. The applied Picture Size will remain in effect whenever you select that source unless you change them.
Series Input signal Picture size M7/M8 DisplayPort (1080p @ 60Hz) 16:9 DisplayPort (3840 x 1600p @ 60Hz) 21:9 DisplayPort (3840 x 2160p @ 60Hz) 16:9 DisplayPort (5120 x 2880p @ 60Hz) 16:9 DisplayPort (3840 x 1080p @ 60Hz ) 32:9 The input ports for external devices may differ depending on the model and geographical area.
Read Before Connecting a Computer (Supported Resolutions) Check the resolutions supported for PC input signals. When you connect your product to a computer, set the computer's video card to one of the standard resolutions listed in the tables below or on the next pages. The product will automatically adjust to the resolution you choose. Note that the optimal and recommended resolutions are 1920 x 1080 at 60 Hz (M5 series), 3840 x 2160 at 60 Hz (M7/M8 series), 5120 x 2880 at 60 Hz (S9 series).
Page 31
VESA CVT Port Horizontal Vertical Polarity Resolution Clock frequency Display frequency frequency (horizontal / USB Type-C/ format (Dots x lines) (MHz) HDMI (KHz) (Hz) vertical) Thunderbolt 4 1920 x 800 60 Hz 49.279 59.877 102.500 + / - **1920 x 800 50 Hz 27.885 49.883...
Supported Resolutions for Video Signals Check the resolutions supported for video signals. CTA-861 Port Horizontal Vertical Clock Polarity Resolution Display frequency frequency frequency (horizontal / USB Type-C/ format (Dots x lines) HDMI (KHz) (Hz) (MHz) vertical) Thunderbolt 4 720 x 576 50 Hz 31.250 50.000...
Specifications General Model Name S27CM50* S32CM50* 27 Class 32 Class Size (27.0 Inches / 68.6 cm) (31.5 Inches / 80.1 cm) 597.888 mm (H) x 336.312 mm (V) 698.4 mm (H) x 392.85 mm (V) Display area 0.1038 mm (H) x 0.3114 mm (V) 0.12125 mm (H) x 0.36375 mm (V) Pixel Pitch 148.5 MHz...
Page 34
● The specifications are subject to change without notice to improve quality. ● For detailed device specifications, visit the Samsung website. ● (Europe only) To access energy labelling information about this product on the European Product Registry for Energy Labelling (EPREL), go to https://eprel.ec.europa.eu/qr/******...
External impact or drop. ● Use of supplies or separately sold product unspecified by Samsung. ● Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. ● Remodeling or repairing the product by customer. ●...