Next steps
1. Replace the
M.2 SSD
2. Replace the
M.2 2230 solid-state drive
3. Replace the
WLAN
card.
4. Replace the battery.
5. Replace the
base
cover.
6. Replace the
microSD
7. Follow the procedure in
SmartCard reader
Removing the SmartCard reader
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
WLAN
card.
6. Remove the
inner
frame.
Steps
1. Disconnect the SmartCard reader flexible flat cable (FFC) from the connector on the USH board [1].
2. Peel the SmartCard FFC from the palmrest [2].
56
Disassembly and reassembly
holder.
or the
M.2 2280 solid-state
card.
after working inside your
before working inside your
card.
drive, whichever applicable.
computer.
computer.