Page 1
Samsung Electronics owns the copyright for this manual. For more information on safe disposal and recycling visit our Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. website www.samsung.com/in or contact our Helpline numbers - Trademarks other than that of Samsung Electronics are owned by their respective owners.
Electricity and Safety Sharpness S27F352FH*/S27F354FH*/S27F359FH*/ Installation S32F351FU*) Color Operation Attaching the Stand (S24F356FH*/S27F358FW*) 21 SAMSUNG MAGIC Angle (S22F350FH*/ Removing the Stand (S24F356FH*/S27F358FW*) 22 S22F352FH*/S22F354FH*) Preparations SAMSUNG MAGIC Upscale Connecting and Using a Source Device HDMI Black Level Parts Control Panel...
Page 3
Table of contents Troubleshooting Guide Language Display Time Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Setup and Reset Check the following. FreeSync (S24F350FH*/S24F352FH*/ Q & A S24F354FH*/S24F356FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/ S27F358FW*/S27F359FH*) Specifications Eco Saving Plus...
Be sure to allow the amount of space as shown below or greater when installing ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service the product.
• Do not disconnect the power cord while the product is being used. • Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • Keep the power socket where the power cord is connected unobstructed.
‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a • Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
‒ Be sure to power off the product and disconnect the power cord when water or other foreign ‒ Contact Samsung Customer Service Center for repairs. substances have entered the product. Then contact Samsung Customer Service Center. • To move the product, first disconnect all the cables from it, including the power cable.
Page 8
Caution • • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage Do not touch the screen when the product has been turned on for an extended period of time as it burn-in or defective pixels.
Chapter 02 Preparations Parts Icons Description Multi directional button that helps navigate. JOG Button ― The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter. Control Panel This LED is power status indicator and works as ―...
Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ― The function buttons page shows if is enabled. Eye Saver Mode S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/S24F354FH*/S24F356FH*/ S32F351FU*/S27F358FW*...
JOG button in the function key guide screen. Press to enable or disable Eye Saver Mode The items below are not available if the function is enable. Eye Saver Mode • SAMSUNG Picture Bright, Brightness, Color, Game Mode MAGIC • System...
― The default brightness can vary depending on the region. JOG Button Action Brightness Move the option UP/DOWN ― This menu is not available when SAMSUNG is set to mode. Bright Dynamic Contrast MAGIC Exit the Main menu. ― This menu is not available when is enabled.
Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/ S24F356FH* S27F358FW* S32F351FU* S24F352FH*/S24F354FH*/S24F359FH*/S27F350FH*/ S27F352FH*/S27F354FH*/S27F359FH* Port Description Port Description Connects to a source device using an HDMI cable or Connects to a PC using a DP cable.
Adjusting the Product Tilt Anti-theft Lock ― The color and shape of parts may differ from what is shown. Specifications are subject to change without ― An anti-theft lock allows you to use the product securely even in public places. ―...
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
Page 16
S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/S24F354FH*/S24F356FH*/S24F359FH*/S27F350FH*/S27F352FH*/S27F354FH*/S27F358FW*/S27F359FH* If either side of the bracket to purchase P0 or P1 is longer than 94.0 mm, the bracket will interfere with the Stand Hinge Part. If this is the case, the wall mount should not be used. P1=94.0 mm 75.0 mm Stand Hinge Part Refer to the area...
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
Page 18
S32F351FU* If either side of the bracket to purchase P0 or P1 is longer than 115.0 mm, the bracket will interfere with the Stand Hinge Part. If this is the case, the wall mount should not be used. P1=115.0 mm 75.0 mm Stand Hinge Part Refer to the area...
Installation Attaching the Stand (S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/S24F354FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/S27F359FH*/S32F351FU*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Insert the stand neck into the stand base in the - Caution direction shown in the figure.
Page 20
Removing the Stand (S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/S24F354FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/S27F359FH*/S32F351FU*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Place a soft cloth over the table to protect the product - Caution and place the product onto the cloth so that the front Do not hold the product upside down only by the stand.
Attaching the Stand (S24F356FH*/S27F358FW*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Insert the stand neck into the stand base in the - Caution direction shown in the figure.
Removing the Stand (S24F356FH*/S27F358FW*) ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Place a soft cloth over the table to protect the product - Caution and place the product onto the cloth so that the front Do not hold the product upside down only by the stand.
Chapter 03 Connecting and Using a Source Device Pre-connection Checkpoints Connecting and Using a PC ― Before connecting a source device, read the user manual provided with it. Select a connection method suitable for your PC. ― Connecting parts may differ in different products. The number and locations of ports on source devices may differ from device to device.
Connection Using the HDMI or HDMI-DVI Cable Connection Using an DP Cable S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/ S27F358FW* S24F354FH*/S24F359FH*/S27F350FH*/S27F352FH*/S27F354FH*/S27F359FH* DP IN ― A DP cable shorter under 1.5m in length is recommended. Using a cable longer than 1.5m can affect the S24F356FH* picture quality. HDMI IN S27F358FW* S32F351FU*...
Connecting the Power Optional Optional S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/ S22F350FH*/S22F352FH*/S22F354FH*/ S24F354FH*/S24F359FH*/S27F350FH*/S27F352FH*/S27F354FH*/S27F359FH* S24F350FH*/S24F352FH*/S24F354FH*/ S24F359FH*/S27F350FH*/S27F352FH*/ S27F354FH*/S27F359FH* S24F356FH* S27F358FW* S32F351FU* S24F356FH* S27F358FW* Connect the power plug to the AC/DC adapter. (Optional) Connect the AC/DC adapter cable to the DC 14V port on the back of the monitor. Plug the AC/DC adapter into the power outlet.
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. The functions available on the monitor may vary depending on the model. Refer to the actual product. SAMSUNG MAGIC Bright mode •...
You can adjust the general brightness of the picture. (Range: 0~100) Adjust the tint of the screen. ― This menu is not available when A higher value will make the picture appear brighter. SAMSUNG is set to mode. Bright Cinema...
SAMSUNG MAGIC Angle (S22F350FH*/ SAMSUNG MAGIC Upscale S22F352FH*/S22F354FH*) function can enhance the layers of the picture details and the vividness of the picture. SAMSUNG Upscale MAGIC The function has more obvious effects on low-resolution pictures. allows you to configure the settings to obtain the optimum picture quality according to your...
Eye Saver Mode Picture Size Set to an optimum picture quality suitable for eye relaxation. Change the picture size. ― This option is not available when TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for FreeSync is enabled.
Screen Adjustment ― This menu is available in Analog mode only. ― This menu is only available when is set to Mode. Picture Size Screen Fit When a 480P or 576P or 720P or 1080P signal is input in mode and the monitor can display normally, select to adjust horizontal position in 0-6 levels.
Chapter 05 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. The functions available on the monitor may vary depending on the model. Refer to the actual product. Transparency Position Set the transparency for the menu windows.
How can I change the frequency? ― When using the generally decreases the response rate. function, use the HDMI/DP cable provided by the monitor manufacturer. FreeSync ― If you encounter any issues when using the function, contact the Samsung Service Center.
Page 34
The models in the Graphic Cards list supports FreeSync can only be used with specific AMD graphics card models. Refer to the following list for FreeSync supported graphics cards: Make sure to install the latest official graphics drivers from AMD that support FreeSync. ―...
Reduce energy consumption compared to consumption at the maximum brightness level. to AV. The picture size will be enlarged. PC/AV Mode ― This option is not available when SAMSUNG is in mode. This option is useful when you view a movie.
Power LED On Information Configure the settings to enable or disable the power LED located at the lower part of the product. View the current input source, frequency and resolution. • Working: The power LED is on when the product is turned on. Information •...
Windows 7 32Bit/64Bit Easy Setting Box enables users to use the monitor by partitioning multiple sections. • Windows 8 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at • Windows 8.1 32Bit/64Bit http://www.samsung.com.
Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
Page 39
Not Optimum Mode is displayed. Video playback is choppy. This message appears when the signal from the graphics card exceeds the maximum resolution or Playback of high-definition large video files can be choppy. This may be because the video player is not frequency for the product.
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel Monitor, and adjust Refresh rate under Monitor settings.
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. ― The above specifications are subject to change without notice to improve quality. ― This device is a Class B digital apparatus. ― For detailed device specifications, visit the Samsung Electronics website.
Standard Signal Mode Table Model Name S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/ S32F351FU* S24F352FH*/S24F354FH*/S24F356FH*/S24F359FH*/ S27F350FH*/S27F352FH*/S27F354FH*/S27F358FW*/ S27F359FH* 30 – 81 kHz 30 – 81 kHz Synchronization Horizontal Frequency 56 – 75 Hz 56 – 61 Hz Vertical Frequency 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz Resolution Optimum Resolution 1920 x 1080 @ 60 Hz...
Page 43
S22F350FH*/S22F352FH*/S22F354FH*/S24F350FH*/S24F352FH*/S24F354FH*/S24F356FH*/S24F359FH*/S27F350FH*/S27F352FH*/S27F354FH*/S27F358FW*/S27F359FH* Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) 49.702 59.810 83.500 VESA DMT, 1280 x 800 63.981 60.020 108.000 VESA DMT, 1280 x 1024 79.976 75.025 135.000 VESA DMT, 1280 x 1024 55.935 59.887 106.500 VESA DMT, 1440 x 900 60.000...
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. • Remodeling or repairing the product by customer.