Configuring The Switch; Configuring The Switch Using The Web User Interface; Configuring The Switch Using The Cli; Accessing The Cli Through The Console Port - Cisco Catalyst 9300 Series Hardware Installation Manual
Hide thumbs
Also See for Catalyst 9300 Series:
- Hardware installation manual (132 pages) ,
- Installing (22 pages) ,
- Manual (15 pages)
Table of Contents
Advertisement
Configuring the Switch
•
•
Configuring the Switch Using the Web User Interface
For instructions on setting up the switch using the WebUI, refer to the required version of the
configuration
Configuring the Switch Using the CLI
Accessing the CLI Through the Console Port
You can access the CLI on a configured or unconfigured switch by connecting the RJ-45 console port or USB
console port of the switch to your PC or workstation and accessing the switch through a terminal emulation
program.
Note
Connecting the RJ45 Console Port
Procedure
Step 1
Connect the RJ45 port to the serial port on the terminal server or your PC using the optional RJ45-to-DB9
adapter cable. Connect the other end of the cable to the switch console port.
Step 2
Start the terminal-emulation program on the PC or the terminal. The program, frequently a PC application
such as Putty or TeraTerm, makes communication between the switch and your PC or terminal possible.
Step 3
Configure the baud rate and character format of the PC or terminal to match the console port default
characteristics:
Configuring the Switch Using the Web User Interface, on page 107
Configuring the Switch Using the CLI, on page 107
guide. In the guide, go to Configuring the Switch Using the Web User Interface.
If you have stacked your switches, connect to the console port of one of the switches in the stack. You can
initially configure the entire stack from any member switch.
C H A P T E R
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
8
software
107
Hide quick links:
Advertisement
Table of Contents
