Related Manuals for Sony LMD-X2710MD
Summary of Contents for Sony LMD-X2710MD
- Page 1 5-032-196-12(1) 2022-11 LCD Monitor Instructions for Use Before operating the unit, please read this manual thoroughly and retain it for future reference. LMD-X2710MD © 2021 Sony Corporation...
- Page 2 Indications for Use/Intended Use This symbol indicates the manufacturer, The LCD Monitor is intended to provide 4K 2D color and appears next to the manufacturer’s video displays of surgical and other medical name and address. images. This symbol indicates the Importer, and Notes appears next to the Importer’s name and registered office address.
- Page 3 IEC 60601-1 standards. If equipment. in doubt, consult qualified Sony service All interface cables used to connect peripherals personnel. must be shielded in order to comply with the limits for a digital device pursuant to Subpart B of 3.
- Page 4 • Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of the LMD-X2710MD. Otherwise, degradation of the performance of this equipment could result. • If the LMD-X2710MD will be used adjacent to or stacked with other equipment, normal operation of the LMD-X2710MD under such configurations should be verified via observation.
- Page 5 Guidance and manufacturer’s declaration – electromagnetic immunity The LMD-X2710MD is intended for use in the electromagnetic environment specified below. The customer or the user of the LMD-X2710MD should assure that it is used in such an environment. Compliance level IEC 60601 Electromagnetic environment –...
- Page 6 Guidance and manufacturer’s declaration – electromagnetic immunity The LMD-X2710MD is intended for use in the electromagnetic environment specified below. The customer or the user of the LMD-X2710MD should assure that it is used in such an environment. IEC 60601 Compliance Immunity test Electromagnetic environment –...
- Page 7 If the measured field strength in the location in which the LMD-X2710MD is used exceeds the applicable RF compliance level above, the LMD-X2710MD should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the LMD- X2710MD.
- Page 8 The LMD-X2710MD is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of the LMD-X2710MD. Otherwise, degradation of the performance of this equipment could result.
- Page 9 – Top side: 30 cm (11 in.) or more Warning on power connections for medical use Consult with Sony qualified personnel for the Customers in the U.S.A. and Canada should use following types of installation location. the following type of power cord.
- Page 10 Disposal of Old Electrical & Electronic information and complete terms and conditions Equipment (Applicable in Republic of India) of Sony’s limited warranty applicable to this product. For the customers in Canada SONY LIMITED WARRANTY - Please visit www.sony.com/psa/warranty for important...
-
Page 11: Table Of Contents
Specifications ...........31 Table of Contents Dimensions ............37 Licenses ............38 Precaution ............12 On Safety ...........12 On Installation ...........12 Safety precautions for using this unit ..12 Precautions when connecting this unit to medical equipment .........12 To prolong the life of the unit ....12 Cautions for RESPONSIBLE ORGANIZATION when connecting this equipment to IT- NETWORK ..........12... -
Page 12: Precaution
When connecting the unit to medical Precaution equipment, refer to “Precautions when connecting this unit to medical equipment”. On Safety Precautions when connecting this unit to medical equipment Operate the unit only with a power source as specified in the “Specifications” section. Before using this unit for medical purposes, be ... -
Page 13: Use With Electrosurgical Knives And Similar Devices
update of equipment connected to the IT- Do not leave the LCD screen facing the sun as it NETWORK; and can damage the LCD screen. Take care when upgrade of equipment connected to the IT- you place the unit by a window. ... -
Page 14: On Fan Error
AC outlet. fan error indication appears on the screen, turn On cleaning the monitor off the power and contact an authorized Sony A material that withstands disinfection is used dealer. for the front protection plate of the medical use LCD monitor. -
Page 15: On Repacking
If you have any questions about this unit, contact LCD (liquid crystal display) panel. your authorized Sony dealer. Liquid crystal and color filters are laid on the front of flat light source (backlight) on the LCD panel. -
Page 16: Location And Function Of Parts And Controls
Location and Function of Parts and Controls Front Panel (On)/ (Standby) switch /// buttons Press the side to turn the monitor on. Press the Press to select the items and setting values. side to switch the unit to standby state. ... -
Page 17: Input Signals And Adjustable/Setting Items
Input select buttons connector assigned to the PORT A/B is PORT A/PORT B: Each input connector can displayed. be assigned for PORT A/B. When you press PORT A or PORT B when In the default setting, Display Port 1 is assigned it is lit in white, an image from the input for PORT A and Display Port 2 is assigned for connector assigned to the PORT A/B is... -
Page 18: Rear/Bottom Panel
Rear/Bottom Panel HDMI cable holder Note Secures the HDMI cable (Ø7 mm or less). Consult with Sony qualified personnel at using this connector. Close Caution For safety, do not connect the connector to peripheral device wiring that might have excessive voltage. - Page 19 Canare Electric Co., Ltd. or an equivalent cable Use the Premium High Speed cable that is shorter than 3 m (meters) with the cable-type logo. (Cables manufactured by Sony are An SDI signal is output from the output recommended.) connector only when the monitor is turned on.
-
Page 20: Preparation
Preparation Warning Using this unit for medical purposes The connectors on this unit are not isolated. Connecting Do not connect any device other than one which conforms to IEC 60601-1 standards. Make sure that the (On)/ (Standby) switch When an information technology device or AV is set to (Standby). -
Page 21: Turning On The Monitor/Switching Input Settings
Attach the connector cover. Shutter AC input connector While pushing the lock levers upward in the direction, push the corners of the connector cover to slide it towards the monitor to attach. AC power cord AC plug holder corner When using the AC adaptor (optional) Slide the shutter to show the DC input connector and insert the DC connector to the... -
Page 22: Initial Setting
Initial Setting For details on switching the input settings, refer to “Location and Function of Parts and Controls” on page 16 or “Input/Output Configuration When you turn on the unit for the first time after menu” on page 26. purchasing it, select the area and language where you intend to use this unit from among the options. -
Page 23: Using The Menu
To set the using language Using the Menu You can select one of eight languages (English, Chinese, Japanese, Italian, Spanish, German, French, and Russian) for display on the menu and The unit is equipped with an on-screen menu for other on-screen displays. The default menu making various adjustments and settings such language is set to “English.”... -
Page 24: Adjustment Using The Menus
Press the / button to select the tab. Adjustment Using the Menus The selected tab is shown in blue, and setting items of the selected tab appear. Select an item. Items Press the / button to select the item. The screen menu of this monitor consists of the The item to be changed is displayed in blue. -
Page 25: Adjusting And Changing The Settings
OSD Setting Submenu Setting Power On Setting Color Temperature Select the color temperature from Power Save among “D56,” “D65,” “D93.” Serial Remote Remote Note Ethernet Setting If the setting is changed, Gain R/G/B Custom Button Offset and Bias R/G/B Offset are Panel Display restored to 0 respectively. -
Page 26: Pip / Pop Menu
“Enhanced Format,” use a Microscope Vital Device Premium High-Speed HDMI cable within a length of 3 meters (Sony Power Supply 5V Output (DVI-D): product recommended). Select “On” when the 5 V output power of the DVI-D input connector is output. -
Page 27: System Configuration Menu
Submenu Setting Submenu Setting Auto Input Select Select the auto detection setting of the Off: input signal from “Mode1,” “Mode2,” The Auto Input Select function does “Off.” not operate. Mode1: Inputting signals to the input System Configuration menu connector automatically changes connectors. - Page 28 Submenu Setting Submenu Setting Auto: Power Save The format and scan mode are Energy Saving You can select the energy saving mode displayed temporarily when the Mode from the following options. content of Status Display is Off: changed. Turns the energy saving mode off.
-
Page 29: Initial Setup Menu
Initial Setup menu Submenu Setting The Initial Setup menu is used to make the basic Custom Button Assigns the function to the CUSTOM 1, CUSTOM 2 or CUSTOM 3 button on the settings to use the unit. front panel, and can set the following functions to on or off. -
Page 30: Preset Menu
Submenu Setting Troubleshooting Auto Input Select Mode1: Inputting signals to the input connector automatically changes connectors. This section may help you isolate the cause of a Mode2: problem and as a result, eliminate the need to Gives priority to PORT A and switches the PORT automatically. -
Page 31: Error Messages
Error Messages Specifications Picture performance When the following messages appear on the screen, turn off the power and contact an LCD panel a-Si TFT Active Matrix authorized Sony dealer. Pixel efficiency 99.99% Messages Description Viewing angle (panel specification) Fan Error A malfunction occurs in the fan. - Page 32 Instructions for Use) (1) WARRANTY, OR FOR ANY OTHER REASON Service Contact List (1) WHATSOEVER. Information for Customers in SONY WILL NOT BE LIABLE FOR CLAIMS OF Europe (1) ANY KIND MADE BY USERS OF THIS UNIT OR Optional accessories MADE BY THIRD PARTIES.
- Page 33 Pin number Signal REMOTE (stereo mini jack) connector Pin number Signal On (short to sleeve) Off (open) Insert detection 5V 2.0A (DC output) connector Pin number Signal 12V 2.5A (DC output) connector Pin number Signal 12 V...
- Page 34 Available signal formats The unit is compatible with the signal systems shown below: Signal format SD-SDI 720×487/59.94i 4:2:2 YCbCr 10bit 720×576/50i 4:2:2 YCbCr 10bit HD-SDI 1920×1080/24p 4:2:2 YCbCr 10bit 1920×1080/25p 4:2:2 YCbCr 10bit 1920×1080/30p 4:2:2 YCbCr 10bit ...
- Page 35 Signal format Display Port 1, 2 HDMI DVI-D 4:4:4 RGB 10bit/8bit × 4:4:4 YCbCr 10bit/8bit 1920×1080/50p × × 4:2:2 YCbCr 12bit × × 4:2:2 YCbCr 10bit/8bit 4:4:4 RGB 10bit/8bit ...
- Page 36 3) The signal 720 × 487/60i is described as “480/60i” with the signal format of OSD menu in this manual. 4) This signal is described as “4K equivalent signal” in this manual. 5) When using Display Port 1, Display Port 2 and HDMI input, jittering, flickering, or ghosting may occur in the images.
-
Page 37: Dimensions
Dimensions * Length of M4 screws (4) ) to 9 ( Front When an optional stand SU-600MD is attached M4 screw Monitor cabinet Attached object Unit: mm (inches) Warning Be sure to set the tightening torque value to the following value. Torque value: 1.2±0.1 N·m Make sure the tightening torque value is at this ... -
Page 38: Licenses
Side Licenses When an optional stand SU-600MD is attached For details on the license, refer to “Software License Information” on the CD-ROM. Unit: mm (inches) Mass: Approx. 9.2 kg (20 lb 4.5 oz) (when the optional stand is not installed)