Page 1 VPL-CWZ10/CXZ10 This manual is for those who encounter issues or have questions when using the Data Projector. Not all models are available in all countries and areas. Please check with your local Sony Authorized Dealer. Before Use Checking the Supplied Accessories...
Page 2 Connecting to a Computer with an HDMI Output Terminal Connecting to a Computer via a Hub or Router Connecting to Video Equipment Connecting to a Video Device with a Video Output Terminal Connecting to a Video Device with a Y PB PR Output Terminal Connecting to a Video Device with an HDMI Output Terminal Connecting to Audio Equipment Fixing the HDMI Cable to the Projector...
Page 3 Projection Setting Menu Menu Operation: Intelligent Setting Menu Operation: Picture Mode Menu Operation: Reset Menu Operation: Contrast Menu Operation: Brightness Menu Operation: Color Menu Operation: Hue Menu Operation: Color Temp. Menu Operation: Sharpness Menu Operation: Light Settings Menu Operation: Expert Setting Screen Menu Menu Operation: Aspect Aspect Ratio...
Page 4: Using Network Features
Menu Operation: Set Password Connection/Power Menu Menu Operation: Network Setting Menu Operation: Communication Mode Menu Operation: Dynamic Range Menu Operation: Input-A Signal Sel. Menu Operation: ECO Menu Operation: Remote Start Menu Operation: Standby Mode Menu Operation: Direct Power On Installation Menu Menu Operation: Screen Fitting Menu Operation: V Keystone Menu Operation: H Keystone...
Page 5 Setting ADCP Setting AMX DDDP/Crestron Room View Resetting the Network Settings Setting the Date and Time Using the Software Update Function Using https Communication Configuring https Communication Connecting with https for the First Time Installing a CA Certificate to Your Computer Deleting a CA Certificate Installed to Your Computer Precautions Precautions...
Page 6: Error Handling
Pin Assignment (USB Terminal) List of Compatible Signals Compatible Signal List (Computer Signal) Compatible Signal List (Video Signal) Projection Distance Projection Distance Projection Distance/Projection Distance Formula (VPL-CWZ10) Projection Distance/Projection Distance Formula (VPL-CXZ10) Error Handling Reading the Indicator Message List Troubleshooting...
Page 7 Others Notice on the Software Notifications Related to GNU GPL/LGPL -applicable Software Other Software Trademarks 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 8: Checking The Supplied Accessories
The battery is already installed. Before using the Remote Commander, remove the insulation film. AC power cord (1) Mini D-sub 15-pin cable (1.8 m) (1) (1-970-584-11/Sony) Extension studs (4) Air filter cover (1) Dust cover assembly (1) Setup Guide (1) For the customers in India only 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 9 Pull out the lithium battery compartment. Pull the battery compartment toward you while releasing the lock. Insert a lithium battery. The lithium battery should be placed in the compartment with the plus side facing up. Close the lithium battery compartment. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 10 Help Guide Data Projector VPL-CWZ10/CXZ10 Attaching the Air Filter (For the Customers in India only) The supplied accessories required vary depending on the installation method. For installing to the floor Remove the air filter (B) from the dust cover assembly (A), and then attach the air filter to the air filter cover (C).
Page 11 When installing to the ceiling, securely attach the dust cover assembly to the unit. Incorrect attachment of the dust cover assembly may cause a malfunction. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 12 Help Guide Data Projector VPL-CWZ10/CXZ10 Parts and Controls (Main Unit) Top/Front /Right ON/STANDBY indicator WARNING indicator Control panel Zoom lever Focus lever Projection lens Ventilation holes (intake) Remote control receiver Ventilation holes (exhaust) Speaker Top cover Rear/Bottom...
Page 13 Doing so may result in the burning or deformation of these objects. Related Topic Parts and Controls (Connection Terminals) Parts and Controls (Remote Commander and Control Panel) Cleaning the Air Filter Reading the Indicator 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 14 Connecting to a Video Device with a Video Output Terminal Connecting to a Video Device with a Y PB PR Output Terminal Connecting to a Video Device with an HDMI Output Terminal Connecting to Audio Equipment 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 15: Remote Commander
Help Guide Data Projector VPL-CWZ10/CXZ10 Parts and Controls (Remote Commander and Control Panel) Remote Commander Control panel (On/Standby) key Turn on/Standby. INPUT (Input selection) key Select the input. MENU (Menu) key RESET (Reset) key ENTER (Enter)/ (Arrow) keys RETURN (Return) key Perform menu operations, etc.
Page 16 If there is any obstruction between the Remote Commander and the remote control receiver on the projector, the projector may not be able to receive signals from the Remote Commander. Related Topic Turning Power On/Off Projecting Images Using the Digital Zoom Function Using Eco Mode Navigating Menus 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 17: Precautions When Connecting
When unplugging a cable, be sure to grip the plug, not the cable itself. For more information, refer also to the instruction manual of the device to be connected. Use a no-resistance audio cable. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 18 B: Mini D-sub 15-pin cable (supplied) Hint For the screen settings of your computer, it is recommended that you set the resolution of an external monitor as below; VPL-CWZ10: 1,280 × 800 pixels VPL-CXZ10: 1,024 × 768 pixels Related Topic...
Page 19 Use an HDMI-compatible device with the HDMI Logo. Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) signals and CEC (Consumer Electronics Control) signals.
Page 20 When you monitor and control the projector via the network, display the control window of the projector with a web browser and enable the desired control protocol. Related Topic Parts and Controls (Connection Terminals) Precautions When Connecting Setting Advertisement Setting PJ Link Setting PJ Talk Setting ADCP 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 21 Connect the VIDEO IN terminal to a video device’s video output terminal, and the AUDIO IN terminal to a video device’s audio output terminal. A : Audio cable (Pin plug x 2 - Stereo mini plug) (not supplied) B : Video cable (not supplied) Related Topic Parts and Controls (Connection Terminals) Precautions When Connecting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 22 A: Audio cable (Pin plug x 2 - Stereo mini plug) (not supplied) B: Component - Mini D-sub 15-pin cable (not supplied) Related Topic Parts and Controls (Connection Terminals) Precautions When Connecting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 23 Use an HDMI-compatible device with the HDMI Logo. Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.) The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) signals and CEC (Consumer Electronics Control) signals.
Page 24: Connecting To Audio Equipment
When [Speaker Setting] is set to [Always On] and the light is off, Input A becomes active. A: Audio cable (Stereo mini plug) (not supplied) Related Topic Parts and Controls (Connection Terminals) Precautions When Connecting Menu Operation: Speaker Setting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 25 If you wish to fix the HDMI cable to the projector, attach a commercially available cable tie or similar item (B) to the antitheft bar (A) on the bottom surface, and secure it as shown in the image. Related Topic Parts and Controls (Main Unit) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 26: Turning Power On/Off
For long-term use, turn off the projector when not in use. Unplug the AC power cord from the wall outlet. Related Topic Parts and Controls (Main Unit) Parts and Controls (Remote Commander and Control Panel) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 27: Selecting The Menu Language
[Language] (Language), then press the ENTER key. Press the (Up/Down/Left/Right) key to select a language, then press the ENTER key. Press the MENU key to turn off the menu screen. Related Topic Menu Operation: Language 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 28: Projecting Images
How the output destination is changed varies depending on the computer. Ex.) Adjust the focus, size and position of the projected image. Related Topic Projection Distance Adjusting the Screen Focus Adjusting the Screen Size Adjusting the Screen Position 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 29 Help Guide Data Projector VPL-CWZ10/CXZ10 Adjusting the Screen Focus Turn the focus lever to adjust the focus. Related Topic Parts and Controls (Main Unit) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 30: Adjusting The Screen Size
Help Guide Data Projector VPL-CWZ10/CXZ10 Adjusting the Screen Size Turn the zoom lever to adjust the size. Related Topic Parts and Controls (Main Unit) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 31: Adjusting The Screen Position
When adjusting the front feet (adjustable), be careful not to get your fingers caught. Do not forcefully press down on the projector with the front feet (adjustable) extended. This may result in malfunction. Related Topic Parts and Controls (Main Unit) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 32: Changing The Screen Aspect Ratio
Pressing the ASPECT key on the Remote Commander switches the aspect ratio of the projected screen. Hint The screen aspect ratio can also be set from [Aspect] in the [Screen] menu. Related Topic Parts and Controls (Remote Commander and Control Panel) Menu Operation: Aspect 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 33 Help Guide Data Projector VPL-CWZ10/CXZ10 Correcting a Vertical Trapezoid If the screen is trapezoidal, perform a keystone correction. Press the KEYSTONE key on the Remote Commander once. The adjustment menu will be displayed. You can also display the adjustment menu from [V Keystone] in the [Installation] menu.
Page 35 If you press the KEYSTONE key on the Remote Commander and switched between keystone correction and corner keystone correction, the adjustment menu value and the screen state may not match until the adjustment begins. Related Topic Parts and Controls (Remote Commander and Control Panel) Menu Operation: H Keystone 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 36 Help Guide Data Projector VPL-CWZ10/CXZ10 Correcting Screen Distortion You can correct image distortion using the corner keystone function. Press the KEYSTONE key on the Remote Commander three times. The guide will be displayed. You can also display the guide menu from [Corner Keystone] - [Adjust] in the [Installation] menu.
Page 37 When a distortion adjustment reaches the limit, the cursor will disappear. Press the RESET key to return to the non-corrected state. Related Topic Parts and Controls (Remote Commander and Control Panel) Menu Operation: Corner Keystone 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 38: Displaying Patterns
There are 2 types of color for the lines of the ruled line pattern and lattice pattern so you can select a line that is easier to see according to the color of the projected screen. Related Topic Parts and Controls (Remote Commander and Control Panel) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 39: Using The Auto-Adjustment Function
[Function] menu will automatically perform APA when a computer signal is fed from the RGB input terminal (Input A). Related Topic Parts and Controls (Remote Commander and Control Panel) Menu Operation: Adjust Signal Menu Operation: Smart APA 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 40 Optimizes the image quality to achieve balance. This is suitable for use at theme parks, public entertainment facilities, conference rooms in the exhibition hall, and so on. Select [Apply] and press the ENTER key. Related Topic Menu Operation: Intelligent Setting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 41: Using The Digital Zoom Function
The magnification ratio can be changed from 1x to 4x. When you select 1x, you cannot adjust the image position. To return to the original image, press the RESET key. Related Topic Parts and Controls (Remote Commander and Control Panel) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 42: Using Eco Mode
With Static Signal: [Light Dimming] [User]: Configure the Eco Mode settings manually. Press the RETURN key to return to the previous screen. Related Topic Parts and Controls (Remote Commander and Control Panel) Menu Operation: ECO 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 43: Navigating Pop-Up Menus
Help Guide Data Projector VPL-CWZ10/CXZ10 Navigating Menus Various projector adjustments and settings can be performed from the menu screen. Selecting an item with an arrow ( ) after the item name will display the items to be set in the next tier.
Page 44: Navigating Settings Menus
Press the MENU key to exit the menu screen. If an operation has not been performed for some time, the menu screen will automatically disappear. Related Topic Parts and Controls (Remote Commander and Control Panel) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 45 If there is no usage environment that corresponds to the choices for [Location], then choose the location with the characteristics closest to your environment. [Location] cannot be configured for each input terminal. Related Topic Menu Operation: Picture Mode 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 46 Sets the image quality to achieve smooth and natural tones. [Presentation] Bright image quality suitable for presentations. Note If [Intelligent Setting] in the [Projection Setting] menu is [On], [Picture Mode] cannot be configured. Related Topic Menu Operation: Intelligent Setting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 47 Press the MENU key. Select [Projection Setting] - [Reset]. Note The [Intelligent Setting] and [Picture Mode] values in the [Projection Setting] menu will not return to default. Related Topic Menu Operation: Intelligent Setting Menu Operation: Picture Mode 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 48 Menu Operation: Contrast Adjust the image contrast. Press the MENU key. Select [Projection Setting] - [Contrast] - Adjust the values. The higher the setting, the greater the contrast. The lower the setting, the lower the contrast. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 49 Menu Operation: Brightness Adjust the image brightness (luminance). Press the MENU key. Select [Projection Setting] - [Brightness] - Adjust the values. The higher the setting, the brighter the image. The lower the setting, the darker the image. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 50 Menu Operation: Color Adjust the image color intensity. Press the MENU key. Select [Projection Setting] - [Color] - Adjust the values. The higher the setting, the greater the intensity. The lower the setting, the lower the intensity. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 51 Adjust the image color tone. Press the MENU key. Select [Projection Setting] - [Hue] - Adjust the values. The higher the setting, the more greenish the image becomes. The lower the setting, the more reddish the image becomes. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 52 [Projection Setting] - [Color Temp.] - The desired setting. Settings [9300K]/[7500K]/[6500K] The higher the temperature, the bluer the image tones become, and the lower the temperature, the redder the tones become. [Brightness Priority] Allows for the brightest projection image. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 53 Adjust the outlines of the image. Press the MENU key. Select [Projection Setting] - [Sharpness] - Adjust the values. The higher the setting, the sharper the image. The lower the setting, the softer the image. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 54 Adjust the light source brightness. [Standard]: The image becomes bright and energy consumption increases. [Middle]: Energy consumption decreases, but the image becomes dark. [Extended]: The image becomes dark, but projection becomes possible for long periods of time. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 55 [2.4]: This is gamma correction for reproducing halftone more faithfully. This will project photos and other vibrant images with natural tones. [Gamma 3]: This is gamma correction for emphasizing bright portions of the image. Creates a balanced image. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 56 Help Guide Data Projector VPL-CWZ10/CXZ10 Menu Operation: Aspect Set what aspect ratio images will be projected for each input signal. Press the MENU key. Select [Screen] - [Aspect] - Item you wish to configure. Settings VPL-CWZ10 For Computer Signal Input [4:3]: Fix the aspect ratio to 4:3 and project onto the entire screen.
Page 57 Related Topic Aspect Ratio 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 58: Aspect Ratio
Help Guide Data Projector VPL-CWZ10/CXZ10 Aspect Ratio VPL-CWZ10 Computer Signal Input signal Image projected using recommended setting values *1 *2 *3 [Full 1] *1 *2 *3 [Full 1] 16:9 16:10 [Full 1] Selecting [Normal] will project the image with the image signal resolution as-is without enlargement processing.
Page 59: Video Signal
Video Signal Input signal Image projected using recommended setting values *1 *2 [4:3] [16:9] 16:9 Depending on the input signal, images may be displayed as follows. In this case, select [16:9]. Depending on the input signal, images may be displayed as follows. In this case, select [Zoom]. VPL-CXZ10 Computer Signal Input signal...
Page 60 Input signal Image projected using recommended setting values *1 *2 [Full 1] 16:9 16:10 *1 *2 [Full 1] Selecting [Normal] will project the image with the image signal resolution as-is without enlargement processing. Selecting [4:3] will project the image onto the entire screen with the aspect ratio ignored. Video Signal Input signal Image projected using recommended setting values...
Page 61 Depending on the input signal, images may be displayed as follows. In this case, select [Zoom]. Related Topic Menu Operation: Aspect 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 62 The value adjusted for [Pitch] will return to its factory setting if [APA] or [Smart APA] in the [Function] menu is performed. If you wish to continue using the adjusted value, set [Smart APA] in the [Function] menu to [Off]. Related Topic Menu Operation: Smart APA 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 63 3 seconds by the minute. This is convenient for alerting the presenter to how much time has elapsed. [Position] [Bottom Right]/[Bottom Left]/[Top Right]: Select the timer display position. [Count UP/Down] [Up]/[Down]: Select whether to count up toward the set time or count down. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 64 Data Projector VPL-CWZ10/CXZ10 Menu Operation: Volume Adjust the volume. Press the MENU key. Select [Function] - [Volume] - Adjust the values. Increasing the value will increase the volume, and decreasing it will decrease the volume. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 65 Press the MENU key. Select [Function] - [Speaker] - [On] or [Off]. Selecting [On] causes sound to be output from the projector speakers. If you do not wish for sound to be output from the speakers, select [Off]. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 66 Selecting [Always On] allows the projector speakers to be used even when the light is off. Note Selecting [Always On] for the [Speaker Setting] will also set [Standby Mode] to [Standard]. Related Topic Using Eco Mode 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 67 Press the MENU key. Select [Function] - [Smart APA] - [On] or [Off]. Selecting [On] allows APA to be activated automatically when a computer signal is supplied. Related Topic Menu Operation: Adjust Signal 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 68 Press the MENU key. Select [Function] - [CC Display] - The desired setting. Settings [CC1]/[CC2]/[CC3]/[CC4]/[Text1]/[Text2]/[Text3]/[Text4] Select the CC (Closed Captioning) service (subtitles or textual information) that is displayed. [Off] CC (Closed Captioning) is not displayed. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 69 Set whether the startup image is displayed during startup. Press the MENU key. Select [Function] - [Start Up Image] - [On] or [Off]. Selecting [On] will enable the startup image to be displayed during startup. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 70 Data Projector VPL-CWZ10/CXZ10 Menu Operation: Language Set the language used in the menu, messages, and so on. Press the MENU key. Select [Operation] - [Language] - The desired language. Related Topic Selecting the Menu Language 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 71 Press the MENU key. Select [Operation] - [Status] - [On] or [Off]. Settings [On] All screen displays become active. [Off] All screens except for the menu display, warning messages, notifications, and so on will not be displayed. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 72 (On/Standby) key to put the projector on Standby, then turn the device on again. If you forget the password, you will be unable to use the projector, so exercise due caution. If you forget the password, contact qualified Sony personnel. (The confirmation method differs by country/region.) Related Topic...
Page 73 With the power on, press and hold the MENU key for approximately 10 seconds. [Control Key Lock] will turn [Off], and the control panel will become operational. Related Topic Parts and Controls (Remote Commander and Control Panel) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 74 Selecting [Update] when [Startup] has been selected saves the changed settings and keeps them the same. Note When performing [Menu Settings Lock] operations, the password must be entered. Set the password in [Set Password] in the [Operation] menu. Related Topic Menu Operation: Set Password 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 75 The default factory setting password is “ENTER, ENTER, ENTER, ENTER.” Use the MENU, (Up/Down/Left/Right), and ENTER keys to enter your new password. Enter the new password again for confirmation. Related Topic Menu Operation: Security Lock Menu Operation: Menu Settings Lock 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 76 Network settings are automatically assigned via the router or another device’s DHCP server function. [Manual] Configure the network manually. Note When setting the IP address manually, enter the IP address after changing to [Manual] once and selecting [Apply]. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 77 Press the MENU key. Select [Connection/Power] - [Communication Mode] - The desired setting. Settings [http] Communicate with http only. [http and https] Communicate with both http and https. [https] Communicate with https only. Related Topic Configuring https Communication 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 78 Set when the image input level is between 0 and 255. Note If the image output settings for the HDMI connection device are not correct, the bright sections and dark sections of the image may become too bright or dark, respectively. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 79 The selected image signal type will be applied. Note Even if [Auto] is set, the image may not be optimized depending on the input. If this occurs, configure manually in accordance with the connected device. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 80 The light output reduction amount differs depending on the [Light Output Mode] setting in the [Projection Setting] menu. Related Topic Menu Operation: Light Settings 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 81 When supplying power to the projector using the Remote Start function, it is necessary to send special commands from the computer. Consult with qualified Sony personnel for details. Setting [Remote Start] to [On] will increase standby power consumption during Standby Mode.
Page 82 If Standby Mode is [Low], you will no longer be able to use networks and network control functions while in Standby Mode. Hint Setting [Remote Start] to [On] will turn the projector on by sending special commands even when [Standby Mode] is set to [Low]. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 83 Hint When the power is turned off, you can disconnect the AC power cord without going into Standby Mode regardless of the [Direct Power On] settings. Related Topic Turning Power On/Off 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 84 [Installation] - [Screen Fitting] - [HV Keystone] or [Corner Keystone]. When you wish to use trapezoidal correction, select [HV Keystone], and when you wish to correct distortion, select [Corner Keystone]. Related Topic Menu Operation: V Keystone Menu Operation: H Keystone Menu Operation: Corner Keystone 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 85 Note Because keystone correction is an electronic form of correction, the image quality may be reduced. Related Topic Correcting a Vertical Trapezoid Menu Operation: Screen Fitting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 86 Note Because keystone correction is an electronic form of correction, the image quality may be reduced. Related Topic Correcting a Horizontal Trapezoid Menu Operation: Screen Fitting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 87 Selecting [Reset] resets the adjusted value and returns the image to an unadjusted state. Note Because keystone correction is an electronic form of correction, the image quality may be reduced. Related Topic Correcting Screen Distortion Menu Operation: Screen Fitting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 88 Adjust the projection position. The adjustable range changes depending on the shrinkage rate. Note Because digital shrinkage is an electronic form of correction, the image quality may be reduced. While adjusting the digital shrinkage, pressing the ENTER key will take you to a shift adjustment menu. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 89 Press the MENU key. Select [Installation] - [Image Flip] - The desired setting. Settings [HV] Flip the image horizontally and vertically. Flip the image horizontally. Flip the image vertically. [Off] Project the image without flipping it. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 90 [Installation] - [High Altitude Mode] - [On] or [Off]. If using the projector in a high-altitude location (1,500 m or more above sea level), set to [On]. Note Using the projector with improper settings may affect the reliability of the components. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 91 Displays the horizontal/vertical frequency and signal type (resolution) of the current input signal. [Light Timer] Displays the light usage time thus far. Note The horizontal/vertical frequency may not be displayed properly due to the input signal. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 92 Related Topic Operating the Control Panel Using the E-mail Report Function Configuring the Network Settings of the Projector Resetting the Network Settings Setting the Date and Time Using the Software Update Function Configuring https Communication 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 93: Displaying The Control Window Of The Projector With A Web Browser
Once the network settings have been configured, the control panel can be displayed thereafter via the operation in Step 3 alone. For https communication, connect with http first, then configure https communication. Related Topic Connecting to a Computer via a Hub or Router Menu Operation: Network Setting Configuring https Communication 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 94: Operating The Control Panel
Help Guide Data Projector VPL-CWZ10/CXZ10 Operating the Control Panel From the control panel displayed in your browser, you can configure access privileges and confirm the projector state. Switching Pages Click the page toggle tab (A) to display the page you wish to configure.
Page 95: Operating The Projector
To enable the new password, enter the new password, then click [Apply]. Note If you forget your password, contact qualified Sony personnel. Your password will be reconfigured once your approval has been obtained. Confirming the Projector State Clicking the [Information] page toggle tab and opening the [Information] page allows you to confirm the projector’s current state.
Page 96: Using The E-Mail Report Function
Help Guide Data Projector VPL-CWZ10/CXZ10 Using the E-mail Report Function Configure the e-mail report function from the [E-mail Report] page. Note The entered value will not be applied until [Apply] is clicked. Click the [E-mail Report] tab and display the [E-mail Report] page.
Page 97 For networks performing Outbound Port25 Blocking, the e-mail report function cannot be used because the SMTP server cannot be connected to. You cannot enter the following characters in the text box: ‘ “ \ & < > 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 98 Help Guide Data Projector VPL-CWZ10/CXZ10 Configuring the Network Settings of the Projector Configure the network functions from the [Setting] page. Note The entered value will not be applied until [Apply] is clicked. Click the [Setting] tab and display the [Setting] page.
Page 99 Related Topic Configuring https Communication 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 100 Only entries consisting of four alphanumeric characters are allowed. The default factory setting community name is “SONY.” To avoid unauthorized access to the projector from another computer, we recommend changing the community name from the one in the factory setting.
Page 101 Turn the PJ Link function on or off. The settings related to PJ Link are applied only if it is on. The function in the default factory setting is off. [Requires Authentication]: Turn the PJ Link authentication function on or off. [Password]: Enter the PJ Link authentication password. Refer to the PJ Link specifications for the default password. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 102 Only entries consisting of four alphanumeric characters are allowed. The community name in the default factory setting is “SONY.” To avoid unauthorized access to the projector from another computer, we recommend changing the community name from the one used in the factory setting.
Page 103 IP address. Once an IP address has been entered, access will only be allowed from the entered IP address. For security purposes, we recommend entering an IP address and restricting access. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 104 [Start Crestron Service]: Turn the Crestron Control function on or off. For details, refer to the Crestron Corporation product catalog and so on. [IP Address]: Enter the Crestron system server. [IP ID]: Enter the CIP protocol IP ID. [Port No.]: Enter the CIP protocol server port number. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 105: Resetting The Network Settings
Help Guide Data Projector VPL-CWZ10/CXZ10 Resetting the Network Settings Return all items that can be configured via a web browser to their factory settings. Click the [Reset] tab and display the [Reset] page. Click [Reset]. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 106: Setting The Date And Time
[Status]: Displays the status of the connection to the NTP server. [latest server data]: Displays the information most recently obtained from the NTP server. [Manual(Local)]: Select this if you will set the date and time manually. [Date(yyyy-mm-dd)]: Enter the date. [Time(hh:mm:ss)]: Enter the time. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 107: Using The Software Update Function
Using the Software Update Function The projector software can be updated via a network. The update file can be downloaded from the Sony website. Note The projector software can be updated via a network only when the projector is in Standby Mode.
Page 108 Related Topic Updating Software 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 109 Help Guide Data Projector VPL-CWZ10/CXZ10 Configuring https Communication Configure https communication on the [Certificate] page. Click the [Certificate] tab and display the [Certificate] page. Select [Communication Mode]. [Http]: http connection only. [Http and Https]: https and http connection can be used at the same time.
Page 110 Related Topic Menu Operation: Communication Mode Configuring the Network Settings of the Projector Connecting with https for the First Time Installing a CA Certificate to Your Computer 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 111 In this case, press the MENU button on the projector or Remote Commander to display the menu screen, and then select [Connection/Power] - [Communication Mode] - [http] to change the communication mode. Related Topic Configuring https Communication 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 112 Help Guide Data Projector VPL-CWZ10/CXZ10 Installing a CA Certificate to Your Computer Depending on the type of certificate installed to the projector, it may not be possible to connect to a network because the browser (Internet Explorer) does not display a dialog where you can decide whether or not to accept the certificate. In this case, follow the procedure below and install a CA certificate to your computer.
Page 113 Click [Next]. Select [Automatically select the certificate store based on the type of certificate] and click [Next]. [Completing the Certificate Import Wizard] will be displayed.
Page 114 Confirm the content and click [Finish]. The CA certificate will be installed. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 115 Help Guide Data Projector VPL-CWZ10/CXZ10 Deleting a CA Certificate Installed to Your Computer Follow the procedure below to delete the CA certificate installed to your computer. On Internet Explorer, select [Internet Options] from the [Tools] menu, select the [Contents] tab and [Certificate], then display the [Certificate] dialog.
Page 116 Select [Local Computer] as the computer being managed for this snap-in and click [Finish]. The item managing the [Certificate] will be displayed in the console root window. Confirm the certificate in question and delete it. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 117 Help Guide Data Projector VPL-CWZ10/CXZ10 On Installation When installing the projector, leave space between any walls, etc. and the unit as illustrated. Top view A: More than 50 cm (19 11/16 inches) B: More than 50 cm (19 11/16 inches) C: More than 50 cm (19 11/16 inches) Avoid using if the projector is tilted more than 15 degrees horizontally.
Page 118 [Installation] menu to [On]. Failing to set this mode when using the projector at high altitudes could have adverse effects, such as reducing the reliability of certain components. Related Topic Menu Operation: High Altitude Mode 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 119: On Cleaning The Lens And The Cabinet
Clean the cabinet gently with a soft cloth. Stubborn stains may be removed with a soft cloth lightly dampened with mild detergent solution and wrung, followed by wiping with a soft dry cloth. Never use solvent such as alcohol, benzene or thinner, or acid, alkaline or abrasive detergent, or a chemical cleaning cloth. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 120 Help Guide Data Projector VPL-CWZ10/CXZ10 On Illumination To obtain the best picture, the front of the screen should not be exposed to direct lighting or sunlight. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 121: On Heat Dissipation
Help Guide Data Projector VPL-CWZ10/CXZ10 On Heat Dissipation The temperature of the projector cabinet may increase during or immediately after use; however, this is not a malfunction. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 122 When using a screen with an uneven surface, stripes pattern may rarely appear on the screen depending on the distance between the screen and the projector or the zooming magnifications. This is not a malfunction of the projector. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 123 Since the projector is equipped with a fan inside to prevent internal temperature from rising, there may be some noise. This is a normal result of the manufacturing process and does not indicate a malfunction. If, however, in a case of abnormal noise, consult with qualified Sony personnel. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 124 On Inspection of Light Source Related Parts Since the projector uses a laser, when performing maintenance or inspection of light source related parts, particular attention and a safe environment are necessary. Be sure to consult with qualified Sony personnel. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 125 On Disposing Used Products Do not dispose the used products and general garbage together. Correctly dispose of used products to avoid harming the environment or the health of yourself and others. Follow the disposal regulations of your area. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 126: On Lcd Projector
Also, when you use multiple LCD projectors to project onto a screen, even if they are of the same model, the color reproduction among projectors may vary, since color balance may be set differently from one projector to the next. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 127 As the condensation may cause malfunction, be careful in adjusting temperature settings of the air conditioner. If condensation occurs, leave the projector turned on for about two hours before use. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 128: Notes On Security
Data Projector VPL-CWZ10/CXZ10 Notes on Security SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION DEVICES, UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND.
Page 129 This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 130 WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES. SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.
Page 131: Cleaning The Air Filter
When the message that prompts cleaning the air filter appears, clean the air filter. If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on a new air filter, consult with qualified Sony personnel.
Page 132 Securely attach the air filter to the air filter cover, taking care not to hit the hook of the air filter cover. If the air filter is attached to the air filter cover incorrectly, malfunction may occur. Related Topic Message List 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 133 When the message that prompts cleaning the air filter appears, clean the air filter. If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on a new air filter, consult with qualified Sony personnel.
Page 134 Securely attach the dust cover to the filter frame, then attach the dust cover assembly to the unit. Incorrect attachment of the dust cover assembly may cause a malfunction. Do not use the unit on the floor when the dust cover is removed from the dust cover assembly. Malfunction may occur. Related Topic Message List 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 135: Updating Software
This method requires that you prepare your own USB drive, have a computer with internet connection, and be in an environment that allows the update file to be written to the USB drive. The update file can be downloaded from the Sony website. https://pro.sony.com Copy the update file to the root folder of the USB drive.
Page 136 Some USB drives may be incompatible. For details, please check the aforementioned website. Do not disconnect the AC power cord during the software update process. Related Topic Using the Software Update Function 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 137: Specifications
Projection System 3 LCD system Display Device Effective Display Size VPL-CWZ10: 0.64 in (16.3 mm) × 3, 16:10 Aspect Ratio VPL-CXZ10: 0.63 in (16.0 mm) × 3, 4:3 Aspect Ratio Effective Pixels VPL-CWZ10: 3,072,000 pixels (1,280 × 800 pixels × 3) VPL-CXZ10: 2,359,296 pixels (1,024 ×...
Page 138 −10 °C to +60 °C (14 °F to 140 °F) (20% - 80% (No condensation)) Power Requirements VPL-CWZ10: 100 V to 240 V AC, 3.4 A – 1.5 A, 50/60 Hz VPL-CXZ10: 100 V to 240 V AC, 3.4 A – 1.5 A, 50/60 Hz...
Page 139: Heat Dissipation
Approx. 5.7 kg (13 lb) Supplied Accessories Remote Commander (RM-PJ8) (1) Lithium battery (CR2025) (1) AC power cord (1) Mini D-sub 15-pin cable (1.8 m) (1) (1-970-584-11/Sony) Extension studs (4) Air filter cover (1) Dust cover assembly (1) Setup Guide (1) For the customers in India only Design and specifications of the unit, including the optional accessories, are subject to change without notice.
Page 140 T.M.D.S. Data1 + T.M.D.S. Data1 Shield T.M.D.S. Data1 - T.M.D.S. Data0 + T.M.D.S. Data0 Shield T.M.D.S. Data0 - T.M.D.S. Clock + T.M.D.S. Clock Shield T.M.D.S. Clock - N.C. RESERVED (N.C.) DDC GND +5V Power Hot Plug Detect 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 141 Image Input (Red) R Image Input (Green) G Image Input (Blue) B Ground RESERVE Ground (For red) Ground (For green) Ground (For blue) Power input for DDC Ground Ground DDC/SDA Horizontal synchronization signal Vertical synchronization signal DDC/SCL 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 142 Help Guide Data Projector VPL-CWZ10/CXZ10 Pin Assignment (RS-232C Terminal) RS-232C Terminal (D-Sub 9 pin, Male) Pin Number Function RXDA TXDA 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 143 Help Guide Data Projector VPL-CWZ10/CXZ10 Pin Assignment (USB Terminal) USB Terminal (Type A, Female) Pin Number Function V BUS (4.4 - 5.25 V) Data － Data + Ground 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 144 Help Guide Data Projector VPL-CWZ10/CXZ10 Compatible Signal List (Computer Signal) Note The projector may not be able to display the image properly if an input signal not listed in the table is used. With input signals that differ from the panel display resolution, the input signal may not be displayed at the same resolution, and the text, ruled line thickness, and so on may become unbalanced.
Page 145 Compatible 1280 x 800 49.7/60 Compatible Compatible 1920 x 1200 74.0/60 Compatible Compatible Identified as a 720/60p video transmission signal. Identified as a 1080/60p video transmission signal. Only 720/60p VESA Reduced Blanking signals are compatible. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 146 720p Not compatible Compatible Compatible 720p Not compatible Compatible Compatible 1080p Not compatible Not compatible Compatible 1080p Not compatible Not compatible Compatible 1080p Not compatible Not compatible Compatible Only compatible with G/Y signal with sync. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 147: Projection Distance
Help Guide Data Projector VPL-CWZ10/CXZ10 Projection Distance The projection distance is the distance from the front surface of the lens to the projection surface. The projection screen height is the distance from the point of intersection (A in the image) of the line drawn perpendicular to the surface projected from the lens center and the projection surface, to the lower edge (upper edge when installed to the ceiling) of the projection screen.
Page 148 Related Topic Projection Distance/Projection Distance Formula (VPL-CWZ10) Projection Distance/Projection Distance Formula (VPL-CXZ10) 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 149: Projection Distance Formula
Help Guide Data Projector VPL-CWZ10/CXZ10 Projection Distance/Projection Distance Formula (VPL-CWZ10) Projection Distance 80-inch screen size (2.03 m) (Horizontal: 1.72 m × Vertical: 1.08 m) (Width 68 in × Height 42 in) Projection Distance L: 2.22 m - 3.56 m (87 in - 140 in) Projection Screen Height Position H: −0.14 m (–5 in)
Page 150 Projection Distance L (Maximum): L = 0.046568 × D - 0.049864 (L = 1.827273 × D – 1.345455) Formula 2 (Unit: m (in)) Projection Screen Height Position H: H = −0.00253 × D (H = –0.10000 × D) Related Topic Projection Distance 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 151: Status Indication
Help Guide Data Projector VPL-CWZ10/CXZ10 Reading the Indicator You can check the projector status or abnormality by checking the lighting/flashing status of the ON/STANDBY indicator and WARNING indicator. If the indicators flash in red, follow the instructions under “Warning Indication and Remedies” to resolve the issue.
Page 152 If the indicators flash in a manner other than described above, unplug the AC power cord and make sure the ON/STANDBY indicator turns off, then plug the AC power cord into the wall outlet and turn on the projector. If the problem still persists, consult with qualified Sony personnel. Related Topic...
Page 154: Message List
The password is entered incorrectly. Enter the correct password. Invalid If you forget the password, contact qualified Sony personnel. (The confirmation method differs by Password! country/region.) This is displayed when the light output decreases due to the settings for when there is no change in Light Dimming the signal.
Page 155 Menu Operation: Input-A Signal Sel. Menu Operation: ECO Menu Operation: High Altitude Mode Menu Operation: Set Password Menu Operation: Menu Settings Lock Cleaning the Air Filter Compatible Signal List (Computer Signal) Compatible Signal List (Video Signal) On Installation 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 156 If [Control Key Lock] is [On], power cannot be supplied via the / (On/Standby) key on the main unit. Set [Control Key Lock] in the [Operation] menu to [Off]. Related Topic Menu Operation: Control Key Lock 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 157: No Image Is Displayed
Confirm that the input is selected correctly. Confirm that the BLANK key is not pressed and that the image is not being deleted. Related Topic Parts and Controls (Remote Commander and Control Panel) Precautions When Connecting Projecting Images 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 158 Help Guide Data Projector VPL-CWZ10/CXZ10 Cannot Connect to Computer Check the network settings. Related Topic Menu Operation: Network Setting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 159: No On-Screen Display
Help Guide Data Projector VPL-CWZ10/CXZ10 No On-screen Display Set [Status] in the [Operation] menu to [On]. Related Topic Menu Operation: Status 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 160 Screen Aspect Ratio is Strange/Screen Display is Small/Part of Image Not Displayed The screen may not be displayed properly sometimes if the input signal is not properly determined. If this occurs, manually configure [Aspect] in the [Screen] menu. Related Topic Menu Operation: Aspect 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 161 If the projection is diagonal relative to the projection surface, the screen will appear trapezoidal. If this occurs, you can use the keystone correction function to correct the issue. Related Topic Correcting a Vertical Trapezoid Correcting a Horizontal Trapezoid 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 162: Screen Distortion
Help Guide Data Projector VPL-CWZ10/CXZ10 Screen Distortion The corner keystone setting is active. Deactivate [Corner Keystone] in the [Installation] menu. Related Topic Correcting Screen Distortion 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 163 When using the projector in a location where the surrounding temperature is high, the luminance is sometimes reduced to protect the projector. Related Topic Menu Operation: Contrast Menu Operation: Brightness Menu Operation: Light Settings Menu Operation: ECO 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 164 The screen will blur if there is condensation on the lens. If there is condensation, keep the projector plugged in and let it sit for approximately two hours. Related Topic Adjusting the Screen Focus On condensation 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 165 Help Guide Data Projector VPL-CWZ10/CXZ10 Screen Noise Confirm that the cable connected to the playback device is firmly inserted. Related Topic Precautions When Connecting 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 166 If the MUTING key was pressed and the sound is muted, there will be no sound output. Press the MUTING key one more time. Confirm that the volume is not set to the minimum. Related Topic Connecting to Audio Equipment Menu Operation: Speaker 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 167 Help Guide Data Projector VPL-CWZ10/CXZ10 Remote Commander Does Not Function Confirm that the batteries are inserted correctly. Confirm that the batteries are not depleted. Related Topic Inserting the Battery into the Remote Commander 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 168 Confirm that the air filter is not blocked and either clean the filter or replace it. Confirm that the ventilation holes are not blocked by a wall or other object, and a secure sufficient gap. Related Topic Cleaning the Air Filter On Installation 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 169: Gnu General Public License
Help Guide Data Projector VPL-CWZ10/CXZ10 Notifications Related to GNU GPL/LGPL-applicable Software This product contains the following software that has received a GNU General Public License (“GPL” below) or GNU Lesser General Public License (“LGPL” below). We hereby inform you that you have the right to obtain, alter, and redistribute the software source code in accordance with the attached GPL/LGPL conditions.
Page 170 another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).
Page 171 acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
Page 172: Gnu Lesser General Public License
<one line to give the program’s name and a brief idea of what it does.> Copyright © <year> <name of author> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation;...
Page 173 Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License.
Page 174 application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
Page 175 for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system.
Page 176: How To Apply These Terms To Your New Libraries
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice That's all there is to it! 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 177: Other Software
Help Guide Data Projector VPL-CWZ10/CXZ10 Other Software This product includes the following software. Please refrain from contacting us regarding the contents of the source code. Boost Boost Software License - Version 1.0 - August 17th, 2003 Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute,...
Page 178 The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
Page 179 ==================================================================== Copyright (c) 1998-2018 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 180 by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code;...
Page 181 The GNU LGPL + unRAR restriction means that you must follow both GNU LGPL rules and unRAR restriction rules. GNU LGPL information -------------------- This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation;...
Page 182 the top of Makefile.in. In short "./configure; make test", and if that goes well, "make install" should work for most flavors of Unix. For Windows, use one of the special makefiles in win32/ or contrib/vstudio/ . For VMS, use make_vms.com. Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant <info@winimage.com>...
Page 183 Gailly and Mark Adler; it does not include third-party code. If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes. Please read the FAQ for more information on the distribution of modified source versions. 5-014-280-13(1) Copyright 2020 Sony Corporation...
Page 184 AMX is a trademark of AMX Corporation. Crestron RoomView is a trademark of Crestron Corporation. All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, ™ and ® marks are not specified. 5-014-280-13(1) Copyright 2020 Sony Corporation...

This manual is also suitable for:

Vpl-cxz10

Sony VPL-CWZ10 Help Manual

Quick Links

Related Manuals for Sony VPL-CWZ10

Summary of Contents for Sony VPL-CWZ10

This manual is also suitable for:

Table of Contents