Playing Back Tapes; Playing Back A Tape - JVC MX-K50 Instruction Manual
Compact component system
Hide thumbs
Also See for MX-K50:
- Service manual (44 pages) ,
- Schematic diagrams (14 pages) ,
- Instructions manual (64 pages)
Table of Contents
Advertisement
Playing Back Tapes
Playing Back a Tape
1
Press 0 EJECT for deck A or EJECT 0 for
deck B.
For Deck A
2
Put a cassette in, with the exposed part of the
tape down and the side you want to play
facing front.
• You can play back only type I tapes.
3
Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck
which you have put a cassette into is selected.
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control).
4
Press TAPE 3 3 3 3 3 .
The tape play starts and the tape
running indicator (3) starts flashing
slowly.
When the tape plays to the end, the deck
automatically stops.
To stop during play, press 7.
To operate the other deck, press TAPE A or TAPE B (or
TAPE A/B on the remote control), then TAPE 3.
To fast-forward the tape, press ¡ (or ¢/¡ on the
remote control). The tape running indicator (3) starts
flashing quickly.
To rewind the tape, press 1 (or 4/1 on the remote
control). The tape running indicator (2) starts flashing
quickly.
To remove the cassette, press 0 EJECT for deck A or
EJECT 0 for deck B.
For Deck B
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
TAPE
– 16 –
Hide quick links:
Advertisement
Table of Contents
