Table of Contents
Advertisement
Selecting the Source
To select the source, press CD 6, TAPE 2 3, FM/AM, or
AUX.
• When you select CD as the source, playback starts
automatically.
To operate the CD player, see pages 10 to 13.
To operate the tape deck, see page 14.
To operate the tuner (FM or AM), see pages 15 and 16.
To record on a tape, see pages 17 and 18.
To use an external equipment, see page 16.
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between "VOL MIN,"
"VOL 1" – "VOL 29," and "VOL MAX."
• The volume level has no effect on recording.
To increase the volume, press VOLUME + (or
turn VOLUME control clockwise on the unit).
To decrease the volume, press VOLUME – (or
turn VOLUME control counterclockwise on the
unit).
• When you press and hold either button, you can change the
volume level continuously.
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
DO NOT turn off (standby) the unit with the volume
set to an extremely high level; Otherwise, the
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source.
REMEMBER you cannot adjust the volume level
while the unit is in standby mode.
Fade-Out Muting (FADE MUTING)
On the remote control ONLY:
Press FADE MUTING.
The volume level decreases to "VOL MIN," and
"MUTING" appears on the display.
To release muting, press FADE MUTING again. The
volume level resumes to the previous level.
9
Selecting the Sound Modes
You can select one of the 4 sound modes.
• This function also affects the sound from headphones.
• This function only affects the playback sound, and does not
affect your recording.
On the remote control ONLY:
To select the sound modes, press SOUND/HBS
repeatedly.
• Each time you press the button, the sound mode
changes as follows:
ROCK:
POP:
CLASSIC: Enriched sound with fine treble and ample bass.
JAZZ:
FLAT:
VOLUME
When the sound mode is activated, the
up on the display.
Reinforcing the Bass Sound
You can boost the bass sound.
• This function only affects the playback sound, and does not
affect your recording.
On the remote control ONLY:
Press and hold SOUND/HBS.
• Each time you press and hold the SOUND/
HBS, HBS turns on and off.
When the HBS is activated, the
the display.
Checking the Clock Time During Play
On the remote control ONLY:
FADE MUTING
Press DISPLAY.
• Each time you press the button, the display
changes the clock indication and the normal
indication alternately. After changing the
display to the clock indication, operating any button or
control also changes the display to the normal indication.
ROCK
POP
CLASSIC
FLAT
JAZZ
(Canceled)
Powerful sound emphasizing treble and bass.
More presence in the vocals and midrange.
Accented lower frequencies for jazz-type music.
Equalizer effect is canceled.
SOUND
SOUND
BASS
indicator lights up on
BASS
SOUND/HBS
indicator lights
SOUND/HBS
DISPLAY
Advertisement
Table of Contents
