PC connection
Follow these steps: On your PC monitor choose a resolution of 1920 × 1080 (LT-32A2 : 1360 × 768) at
60Hz and save this configuration. Shut down your PC and connect the shut off LCD TV.
Use a screensaver to avoid burning-in of static picture content.
Use a PC-VGA cable (not supplied) to connect the LCD-Monitor to your PC. Make the connections carefully
so as not to break or bend the contacts inside the plug.
TV (Rear view)
Select PC input
Switch on the LCD-TV.
Select the PC mode (see page 9).
Note:
•
If no signal or a signal with a non-
supported resolution is connected, No
Signal is displayed.
•
As this LCD-TV is not a PC monitor
correct display cannot be guaranteed for
every PC / graphics card.
•
When the signal described below is input,
the black bar or line will appear on the
screen. This is to display the image to dot
by dot.
LT-32A2 : 1280x768/1360x768 on 16:9
LT-32Z20/LT-40Z20 : 1280x1024 on 4:3
Supported PC resolutions
resolution
640x480
800x600
1024x768
1280x720
1280x768
1360x768
1280x1024
1440x900
1920x1080
Selected Items
PC Setup
Auto Adjust
H Position
V Position
Phase
Clock
To AUDIO PC/DVI input
To PC input
Example: Adjust the "H Position".
1
During PC mode press MENU.
2
Select "PC Setup" > "H Position", then press ENTER. Press
or
3
Press RETURN several times to return to the normal
fps (Hz)
screen.
60
60
60
60
60
60
60
60
60
"H Position", "V Position", "Phase" and "Clock" are adjusted automatically as per the
input PC video signal.
•
When PC-input mode was selected and a PC-signal was input, Auto Adjust will be
performed automatically.
To adjust the horizontal placing of the image.
To adjust the vertical placing of the image.
Eliminates the horizontal (Phase) interfering lines.
Eliminates the vertical (Clock) interfering lines.
Audio cable (not supplied)
VGA Cable (not supplied)
PC Setup
Auto Adjust
H Position
Picture
V Position
Phase
Sound
Clock
Channel
PC Setup
Feature
to adjust "H Position".
Setup hint
PC
0
0
0
0
19