Related Manuals for Sony SNC-VB770/K2
Summary of Contents for Sony SNC-VB770/K2
- Page 1 C-357-100-11 (1) Network Camera Installation Manual Before operating the unit, please read this manual thoroughly and retain it for future reference. SNC-VB770 © 2016 Sony Corporation...
-
Page 2: Table Of Contents
About the Manuals Table of Contents Safety Regulations (supplied) About the Manuals ............ 2 Location and Functions of Part ....... 3 The Safety Regulations describes the secure usage of Installation ..............7 camera. Be sure to read it. Mounting the lens ..........7 Mounting the wire rope ......... -
Page 3: Location And Functions Of Part
Use the position of this line to measure the distance from Note the camera to objects correctly. Please contact the Sony inquiry counter for verified SD memory cards. f Mount Mount the E-mount lens. - Page 4 k SD MOUNT (SD mount) indicator Lights on while an SD memory card is mounted. l SD OFF switch You can remove the SD memory card safely by pressing the switch. Remove the card after the SD MOUNT indicator goes off. Notes •...
- Page 5 12 V (DC power input) terminal h WLAN (wireless LAN terminal) Connects to a DC 12 V power supply. Attach Sony USB wireless LAN module IFU-WLM3 c U Screws for ground wire (WLAN module, sold separately). Use this to adjust the view angle on installation.
- Page 6 i 5 (line output) terminal (mini-jack, monaural) Connection to I/O cable This is not used in this version. Mechanical switch/open collector output If the speaker is connected, noise may sometimes occur. equipment This is not a fault, but it is due to the electromagnetic block.
-
Page 7: Installation
• Check that the attachment is not loose at least once a year. Perform more frequent checks depending on the usage. • Full performance may not be achieved depending on the installed circumstance or lens. Please contact Sony for details. Notes Mounting the lens •... -
Page 8: Mounting The Wire Rope
To remove the lens Mounting screw (supplied) Rotate the lens in the direction of the arrow until it Wire rope (supplied) stops while pressing the Lens release button, then remove. Screw (not supplied) Mount the wire rope to the junction box on the ceiling. Lens release button Use screws which fit the screw holes on the junction box (not supplied). -
Page 9: Connection
• Supply either DC 12 V, AC 24 V, or PoE. • Do not connect AC 24 V to the DC power input terminal. Otherwise it will lead to failure. SNC toolbox stands for Sony Network Camera toolbox. Connection to DC 12 V or AC 24 V Connect the camera’s power input cable to the DC 12 V or... -
Page 10: Specifications
Specifications Camera ® Image sensor 35 mm full frame Exmor CMOS sensor Number of Effective Pixels Approx. 12.2 Megapixels Lens type E-mount lens (option) Sync System Internal synchronization Minimum Illumination (30 IRE) 0.004 lx (1/30s, F1.4) Video Image Compression Format H.264 (High/Main Profile), JPEG H.264 (B-picture) supports the resolution below. - Page 11 It may appear flawless, but the components may have deteriorated over time, which may cause a malfunction or accident. For details, please consult the store of purchase or an authorized Sony dealer. Note The Network Camera is to be connected only to PoE networks without routing to the outside plant.