Table of Contents
Advertisement
Unknown user password
If the computer you are servicing has an unknown user password, follow these steps to clear the
password.
NOTE:
These steps also clear CMOS.
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the RTC battery (see
6.
Wait approximately 5 minutes.
7.
Replace the RTC battery and reassemble the computer.
8.
Connect AC power to the computer. Do not reinsert any batteries at this time.
9.
Turn on the computer.
All passwords and all CMOS settings have been cleared.
52
Chapter 4 Removal and replacement procedures
Battery on page
55).
RTC battery on page
69).
Hide quick links:
Advertisement
Table of Contents
