MAKING
CONNECTIONS
* image shown may differ from your TV.
This section on MAKING CONNECTIONS mainly
uses diagrams for the
LP36
Connect various external devices to the TV
and switch input modes to select an external
device. For more information on external device's
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
NOTE
The external device connection may differ
y
y
from the model.
Connect external devices to the TV
y
y
regardless of the order of the TV port.
If you record a TV program on a DVD
y
y
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
on recording, refer to the manual provided
with the connected device.
Refer to the external equipment's manual for
y
y
operating instructions.
If you connect a gaming device to the TV,
y
y
use the cable supplied with the gaming
device.
In PC mode, there may be noise associated
y
y
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
In PC mode, some resolution settings may
y
y
not work properly depending on the graphics
card.
/DVI IN
1
2
COMPONENT
AUDIO IN
OPTICAL
IN
(COMPONENT/RGB/DVI)
AUDIO OUT
** models.
CLOCK
SPEAKER OUT
LAN
VOLUME CONTROL
RS-232C IN
STEREO (8 )
(CONTROL & SERVICE)
1
COMPONENT
AUDIO IN
IN
(COMPONENT/RGB/DVI)
SPEAKER OUT
LAN
VOLUME CONTROL
STEREO (8 )
(CONTROL & SERVICE)
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
AV
(RGB)
LNB IN
ANTENNA/
Satellite
CABLE IN
(*Not Provided)
NOTE
Use a signal splitter to use more than 2 TVs.
y
y
If the image quality is poor, install a signal
y
y
amplifier properly to improve the image
quality.
If the image quality is poor with an antenna
y
y
connected, try to realign the antenna in the
correct direction.
An antenna cable and converter are not
y
y
supplied.
Supported DTV Audio: MPEG, Dolby Digital,
y
y
Dolby Digital Plus, HE-AAC
Satellite dish Connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
/DVI IN
2
AV
(RGB)
OPTICAL
AUDIO OUT
CLOCK
LNB IN
RS-232C IN
Satellite
MAKING CONNECTIONS
ANTENNA/
CABLE IN
(*Not Provided)
19