Hitachi CP-X3014WN User Manual page 60

Hide thumbs Also See for CP-X3014WN:

Table of Contents

7. Other Functions

7.3 Event Scheduling(continued)

Schedule Settings (&27)

Schedule settings can be configured from a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter "http://192.168.1.10/" into the address bar of the web browser, and

select Projector Web Control from the selection window.

2) Enter your user name and password, and then click the [OK].

3) Click the [Schedule Settings] on the main menu and select the required

schedule item. For example, if you want to perform the command every

Sunday, please select the [Sunday].

4) Click the [Enable] check box to enable scheduling.

5) Enter the date (month/day) for specific date scheduling.

6) Click the [Apply] button to save the settings.

7) After configure the time, command and parameters, click the [Register] to add

the new event.

8) Click the [Delete] button when you want to delete a schedule.

There are three types of scheduling.

1) Daily: Perform the specified operation at a specified time every day.

2) Sunday ~ Saturday: Perform the specified operation at the specified time on a

specified day of the week.

3) Specific date: Perform the specified operation on the specified date and time.

NOTE

• In standby mode, the POWER indicator will flash green for approx. 3

seconds when at least 1 "Power ON" schedule is saved.

• When the schedule function is used, the power cord must be connected to the

projector and the outlet. The schedule function does not work when the breaker

in a room is tripped. The power indicator will lights orange or green when the

projector is receiving AC power.

Table of Contents

Cp-x2514wn Cp-x4014wn Cp-wx3014wn Cp-x2514nm Cp-x251 Cp-x401