Table of Contents
Advertisement
diagnostics Menu
This diagnostic function provides current status information of the TV in XML file format using a USB
device. If the user sets a signal standard level, SignalTrace checks the signal strength status of the digital
channel that the user tuned to. It checks and records good and bad channel signals, and then provides the
signal information to a USB storage device in XML file format.
1
Overview Diagnostics
- It provides status information of the TV and information about the current input in XML file format.
(There are two kinds of information. There is information which is extracted regardless of the
model, such as the model name or boot version, and there is information which is available
depending on the model, such as the micom version, PTC version, etc.). The information created
in the XML file can be checked in the TV's UI by pressing 88888888 in the TV's Option menu.
- If a SignalTrace standard level is set, it saves the average value of the channel signal with less
than 30 tuning counts to the digital broadcasting channel. If the count is more than 30, it saves
good and bad signals by comparing the average signal value to the current signal strength and
signalTrace standard level (SignalTracer Set) value.
y Bad signal : BML (average value) → strength (current signal strength) and (BML - strength) →
SignalTracer Set.
y Good signal: BML→ strength and (strength - BML) → SignalTracer Set.
- It provides the good and bad signals, average signal value, channel information, and date
information etc. in USB in XML file format. (Saved in changedSignal_report tag) Up to 127
reports for good and bad signals are saved. If the reports number more than 127, they are written
again beginning from 1.
2
Saving some status information of the TV set through USB in XML file format
- Create an LG_SVC folder on the USB on a PC.
- Create an empty file named tv_signal.rms in the LG_SVC folder.
- Insert the USB device into the TV.
- If the "Diagnostics is completed" message is displayed, remove the USB, open the tv_signal.rms
file on a PC and check the XML (model name, FirmwareVersion, bootVersion etc.) created within
the file.
- The information created in the XML file can be checked in the TV's UI by pressing 88888888 in
the TV's Option menu.
39
INSTALLATION MENU
- Quick Links:
- Factory Reset
Hide quick links:
Advertisement
Table of Contents
