ENTERTAINMENT
Connecting to a Wired Network
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustra-
tion and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of networks may require the display net-
work settings to be adjusted. For most networks,
the display will connect to automatically without
any adjustments.
For detail information, contact your internet pro-
vider or router manual.
Router
Router
@
Cable modem
Cable modem
Internet
Internet
CAUTION
Do not connect a modular phone cable to
y
y
the LAN port.
Since there are various connection meth-
y
y
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
LAN
LAN
WAN
ETHERNET
To set up the network settings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),
1
Press SETTINGS to access the main menus.
2
Press the navigation buttons to scroll to
WORK
and press OK.
3
Press the navigation buttons to select
Setting
and press OK.
4
If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5
Select
IP Auto Setting
-
IP Manual
Setting: Press the navigation and
number buttons. IP addresses will need to be
input manually.
-
IP Auto
Setting: Select this if there is a
DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you're using a broadband router or broad-
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-
mined.
6
When you are finished, press EXIT.
CAUTION
Network setting menu will not be avail-
y
y
able until the display connected to physical
network.
Since there are various connection meth-
y
y
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
25
ENTERTAINMENT
NET-
Network
or
IP Manual
Setting.