Table of Contents
Advertisement
Film Stabilization
The Film Stabilization feature allows the adjustment of motion
smoothness.
a
In the Advanced Picture Settings menu, press
select Film Stabilization.
b
C
c
Press
or
to select High, Middle, Standard or
Off.
NOTE:
• When Picture Mode is set to AutoView, the Film
Stabilization feature will have an additional "Auto" mode.
• When Picture Mode is set to Game, this feature will be
grayed out and automatically set to Standard.
Resetting the advanced picture settings
This feature allows you to reset the current Advanced Picture
Settings to the default values.
a
In the Advanced Picture Settings menu, press
select Reset.
b
Press OK.
Expert Picture Settings
Test Pattern
When the test pattern is on screen, you can navigate in the
Picture submenus and adjust picture settings without removing
the image.
When you move to a non-Picture menu, or close the menus,
regular video will be restored.
a
In the PICTURE menu, press
Picture Settings, and then press OK to display Expert
Picture Settings menu.
b
B
b
Press
or
to select Test Pattern.
c
C
c
Press
or
to select On.
d
Press EXIT to close.
RGB Filter
This feature individually enables or disables the red, green,
and blue components of the picture to allow for more accurate
adjustment of each colour.
a
In the Expert Picture Settings menu, press
select RGB Filter, and then press OK.
b
B
b
Press
or
to select Red, Green or Blue to adjust.
c
C
c
Press
or
to select On.
b
to
b
to
B
b
or
to select Expert
B
b
or
to
39
d
b
Press
to select Colour or Tint, and then press
c
to adjust.
e
Press EXIT.
NOTE: It is not possible to turn off all three colours
simultaneously.
White Balance-
Window Display
This feature displays a special Window Pattern to be used
when adjusting white balance with a measuring device.
a
In the Expert Picture Settings menu, press
select White Balance, and then press OK.
b
B
b
Press
or
to select Window Display and press
c
or
to select On.
c
Press EXIT to close.
White Balance-
Setting Type
You can select the type of white balance adjustment that you
wish to perform.
a
In the Expert Picture Settings menu, press
select White Balance, and then press OK.
b
B
b
Press
or
to select Setting Type and press
to select 2P or 10P.
White Balance-
2P White Balance
a
b
Press
to select 2P White Balance.
b
B
b
Press
or
to select Red-Offset, Green-Offset,
Blue-Offset, Red-Gain, Green-Gain, or Blue-
Gain.
c
C
c
Press
or
to adjust.
White Balance-
10P White Balance
a
b
Press
to select 10P White Balance.
b
B
b
Press
or
to select IRE, Red, Green, or Blue.
c
C
c
Press
or
to adjust.
NOTE: The adjustments made for Red / Green / Blue are
stored separately for each IRE setting. (There are ten IRE
settings from 10 to 100.)
CONTROLS AND FEATURES
C
B
b
or
B
b
or
C
or
or
to
C
to
c
Advertisement
Table of Contents
