Table of Contents
Advertisement
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
LAN port
COMPONENT VIDEO INPUT*
VIDEO INPUT**
OPTICAL DIGITAL AUDIO OUTPUT
PC/HDMI2 AUDIO (shared)
®
HDMI
INPUT SOCKETS
Aerial/Cable
Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the SATELLITE
ANTENNA socket on the TV. You can receive TV, radio,
interactive TV, and HD TV with clear reception.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television.
Use the SCART Adaptor cable (supplied).
Before running Auto Tuning, put your decoder and media
recorder to Standby.
*COMPONENT VIDEO INPUT connection:
Use the COMPONENT Adaptor cable (supplied).
The AUDIO terminals are shared with the VIDEO INPUT.
**VIDEO INPUT connection:
Use the A/V Adaptor cable or SCART-AV Adaptor cable
(supplied).
The AUDIO terminals are shared with the COMPONENT
INPUT.
The Digital Audio Output socket enables the connection of a
suitable surround sound system. NOTE: this output is always
active.
SCART Adaptor cable
(supplied)
media recorder
"F-type"
®
HDMI
(High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output.
For acceptable video or PC signal formats through the HDMI
terminals, see page 85.
LAN port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owner's manuals for all additional equipment must be
referred to for exact instructions.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
o
press
to select between DTV, EXT 1, EXT 2, EXT 3,
HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
9
CONNECTING YOUR TV
POWER switch
POWER cord
FIXING STRAP
Satellite dish
Advertisement
Table of Contents
