Page 1
® Operating Instructions & Installation Instructions Heat Pump Tumble Dryer (Domestic use) Model No. NH-P70G2 Read Before Using SAFETY PRECAUTIONS Drying Instructions Maintenance Troubleshooting Installation Instructions Thank you for purchasing this appliance. - For optimum performance and safety, please read these instructions carefully.
Consider the Environment Disposing of packaging Checking before use The packaging used to protect the Before the appliances initial operation or appliance from damage during after a prolonged period of non-operation, transportation is all recyclable. For perform the following procedures if you are information on recycling, contact your local using the extended water-drain hose: authority.
SAFETY PRECAUTIONS - Do not dry unwashed items in the appliance. Caution! Risk of fire. - Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble Please read and follow these safety dryer. The items become warm, causing precautions.
Page 5
SAFETY PRECAUTIONS Power source and mains lead - Do NOT place a stand or a chair close to the appliance. - Unplug the mains lead when cleaning Children may be able to reach the the appliance. control panel or climb onto or into the - Check the mains lead and mains plug for appliance.
Page 6
SAFETY PRECAUTIONS To Prevent Injury CAUTION - The installation of the appliance should be done by the manufacturer’s dealer or This describes issues which could service agent. cause injury or damage your If the installation, test run and inspection belongings. of the appliance are not carried out following the installation method outlined General Use...
Checking Your Tumble Dryer Your tumble dryer Water container Water-drain hose (see page 17) (see pages 27-28) Drum Door Mains lead/ Mains plug Heat exchanger unit Adjustable feet (see page 26) Caution Do NOT bend the mains lead when the appliance is running. Accessories Make sure that all the accessories are supplied with the appliance.
Using the Buttons 9 10 11 Cotton /Colours Easy-care Extra Dry Gentle Dry Extra Dry Cupboard Dry Plus Cupboard Dry Cupboard Dry Buzzer Iron Dry Iron Dry Mixed Anti-crease Rapid 40 Cupboard Dry Start/Pause Iron Dry Wool Speed Drying Level r/min Time Add Time...
Using the Buttons Additional functions 11. Process indicators - These indicators show the programme’s Depending on the programme, you can processes. Processes consist of Dry combine different additional functions. , Iron Dry , Cupboard Dry , and Note Cupboard Dry Plus (Extra Dry) - After drying starts, the dry indicator Some additional functions cannot be starts flashing, and the other indicators...
Drying Required time Preset timer Times depend on the programmes, Drying You can preset the time for when the Level settings and other settings that have drying finishes. been selected. The drying might finish before or after - Since the displayed times change preset times depending on the kind of automatically according to the sizes laundry, the temperature, and the moisture...
Selecting the Programme Description and types of fabric that can be dried Programme load Cotton For white and coloured cottons or linens Colours Extra Dry 7 kg ― ― ― ― ― ― ― ― ― ―...
Selecting the Programme Sub-programme description Post-drying ironing Extra Dry Applicable drying For multi-layered and very thick fabrics method Sub- Example: towelling dressing gowns and bed linens programme Do not use this sub-programme for loop knitted fabrics (T-shirts, underwear and baby clothes, for example), as they have a ...
Drying Outdoor/Sport Wears and Delicates Preparing the laundry Outdoor/Sports programme Sorting clothing Make sure that the item to be dried can be dried with this programme. - Read clothing drying labels to help you sort them into different loads. Delicate laundry loads - Sort the laundry by colour, by type of - Wool programme: 2 kg or less fabric, drying condition required, and...
Maintenance Emptying water Cleaning the outside of the appliance Empty the water after every drying. Do not empty it while drying. Clean the outside of the appliance with a soft cloth and mild detergent, for example, 1. Pull out the water container and hold it level. kitchen detergent, and soapy water.
Maintenance Cleaning the moisture Filter locations sensors Filters are located in the following 3 locations. Clean once a month. 1) In the door (fluff filter) The appliance is equipped with stainless- 2) In the door opening (filter frame) steel moisture sensors. They measure how 3) In front of the heat exchanger unit damp the laundry is.
Maintenance Cleaning the fluff filter 4. Replace the fluff filter to its original position. Clean the fluff filter after every drying programme. 1. Open the door, and then slide the lever on the top of the door. Extra cleaning Remove any fluff from the hollow part of the door with a bottle brush or a vacuum cleaner.
Maintenance Cleaning the fine filter 4. Separate the fine filter from the inner cover. Clean the fine filter every month. Fine filter 1. Open the panel. Inner cover 5. Clean the fine filter using a vacuum cleaner or with water. 2.
Fault Checklist Problem Cause Appliance does not work. - The fuse may have blown out or breaker may have tripped. - The mains plug may not be connected firmly to the mains socket. - The On button may have not been pressed. - The Start button may have not been pressed.
Page 22
Fault Checklist Problem Cause Drying takes too long. - The laundry may be too wet. - The laundry may have become tangled. - The laundry may be too heavy. - Clothes which dry quickly and clothes which dry slowly may have been dried together. - The ambient air temperature may be too low.
Error Display Error Display What to do Make sure that the door is shut properly. Close the door securely and press the Start button. Door is open Empty the water if the water container is full. (See page 17.) Set the water drain hose properly. (See pages 27-28.) After the above procedures, turn the power on again and press Unable to drain the Start button.
Choosing the Right Location Transporting the appliance Caution If the appliance has to be transported If the appliance has not been at a tilt, only tip it toward the water transported as described, then it container side but not more than must be left to stand for at least 90 degrees.
Choosing the Right Location Installing the set-in Warning appliance The appliance must not be installed - You need a space at least 60 cm wide. behind a lockable door, a sliding At least 2 mm of clearance on the door or a door with a hinge on sides, and 3 mm of clearance above the opposite side to that of the and behind the appliance are required...
Panasonic washing To adjust the feet, use the ‘A’ end of the machine using the spanner. Washer-dryer stacking kit (N-SKT100). - Panasonic accessory available to order Lock nut Read carefully the Foot Washer assembly instructions supplied with the 1.
Connecting Power Supply and Hose Follow the instructions in this section to prevent water leaks. If you are unsure, ask a service agent to connect the hoses. Hose and mains lead lengths Left side connections Right side connections ~ 90 cm ~ 135 cm ~ 150 cm ~ 140 cm...
Page 28
Connecting Power Supply and Hose 2. Connect the water-drain hose to the - Left side connection extended water-drain hose, and then For a left side connection, the first affix the spring clamp to it. pattern is recommended. 3. Run the extended water-drain hose toward the right side (as viewed from - Right side connection the front of the unit) and wind it in...
Checking After Installation Installation checklist 2) 3) 2) 3) 1) Location 3) Foot cushions Is the appliance on a flat, stable Are they standing flat? surface? If the appliance is not level, there may Does it run without vibrating? be abnormal sounds when water is drained out.
Power Consumption Final spin speed Additional Power Programme Load in a washing Time function consumption machine Cotton/ Cupboard 7 kg 1600 r/min 1.47 kWh 2:30 Colours 1000 r/min 1.67 kWh 2:50 4 kg 1000 r/min 1.05 kWh 1:50 Speed 7 kg 1600 r/min 1.60 kWh 1:42...
Specifications Model No. NH-P70G2 Rated voltage 220 - 240 V Rated frequency 50 Hz Maximum energy rated power input 870 - 910 W Off-mode 0.18 W Power consumption Left-on mode 1.36 W Product weight 55 kg Maximum mass of dry cloth 7 kg Product dimensions 596 mm (W) x 625 mm (D) x 845 mm (H)