Advertisement
Quick Links
13-32
Rear Engine Rider
Model Nos. 70185 and 70186
Loose Parts
Description
Wheels
Flat washers, M16 (3 mm thick)
Spacers, M16 (1 mm thick)
Cotter pins
Seat
Screws, M8 x 18 mm
Flat washers, M9
Lock washers
Socket pin
Engine cover
Screws, M6 x 25 mm
Frame
Fabric bag with clips
Handle
Locknuts, M8
Washers, M9
Z-brackets
Bolts, M6 x 16.2 mm
Nuts, M6
Grass collector cover
Pins
Full bag lever
Bolts, M6 x 20 mm
Flat washers, M6.5
Nuts, M6
Recycler cover
Draining tube
Keys
Spark plug wrench
Operator's Manuals (English and French)
Engine operator's manual
2003 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Qty.
Use
2
2
Installing the front wheels
4
2
1
4
Installing the seat
4
4
1
Attaching the steering wheel
1
Installing the engine cover
2
1
1
1
Assembling the grass collector
2
4
2
2
2
Installing the grass collector
1
2
1
2
4
Installing the battery
2
Recycling the grass clippings; refer to the tractor
1
Operator's Manual
1
Draining the engine oil
2
Using the keys in ignition and KeyChoice switches
1
Replacing the spark plug
2
Reading before operating the tractor
1
1
Form No. 3351-232
Setup Instructions
Contact us at www.Toro.com
All Rights Reserved
Printed in Italy
Advertisement
Related Manuals for Toro 13-32
Summary of Contents for Toro 13-32
- Page 1 Spark plug wrench Replacing the spark plug Operator’s Manuals (English and French) Reading before operating the tractor Engine operator’s manual Contact us at www.Toro.com 2003 by The Toro Company All Rights Reserved 8111 Lyndale Avenue South Printed in Italy Bloomington, MN 55420-1196...
- Page 2 Assembling the Tractor Attaching the Steering Wheel 1. Rotate the steering wheel upward until it is aligned with Installing the Front Wheels the steering column. 1. Slide a flat washer (M16, 3mm thick) onto each spindle 2. Secure the steering wheel with the socket pin (Fig. 3). (Fig.
- Page 3 Assembling the Grass Collector 1. Slide the bag onto the frame and secure it with the clips (Fig. 5). m-6101 Figure 7 1. Rear panel 4. Full bag lever 2. Switch 5. Screw 3. Switch plate 2. Hold the switch plate against the switch and slide the full bag lever into the rectangular slot on the rear panel.
- Page 4 Activating the Battery 7. Charge the battery for 1 hour at 25 to 30 amps or 6 hours at 4 to 6 amps. Do not overcharge the battery. Purchase bulk electrolyte with 1.260 specific gravity from a local battery supply outlet. Warning Danger Charging the battery produces gasses that can...