Table of Contents
Advertisement
11.5
Disposal of components
Components
The motors consist mainly of steel and various proportions of copper and aluminum. Metals
are generally considered to be unlimitedly recyclable.
Sort the components for recycling according to whether they are:
• Iron and steel
• Aluminum
• Non-ferrous metal, e.g. windings
The winding insulation is incinerated during copper recycling.
• Insulating materials
• Cables and wires
• Electronic waste
Process materials and chemicals
Sort the process materials and chemicals for recycling according to whether they are for
example:
• Oil
• Grease
• Cleaning substances and solvents
• Paint residues
• Anti-corrosion agent
• Coolant additives such as inhibitors, antifreeze or biocides
Dispose of the separated components according to local regulations or via a specialist
disposal company. The same applies for cloths and cleaning substances which have been
used while working on the motor.
Packaging material
• If necessary, contact a suitable specialist disposal company.
• Wooden packaging for sea transport consists of impregnated wood. Observe the local
regulations.
• The foil used for water-proof packaging is an aluminum composite foil. It can be recycled
thermally. Dirty foil must be disposed of via waste incineration.
1LE7 shaft heights 71 ... 315
Operating Instructions, 04/2022, A5E51689275A-AA
Disposal
11.5 Disposal of components
115
Advertisement
Table of Contents
