Table of Contents
Advertisement
Recording movies
(Movie): When recording a movie
(Photo): When recording a photo
MODE button
Press MODE to turn on the
Press START/STOP to start recording.
The recording lamp lights up during recording (p. 112).
To stop recording, press START/STOP again.
Notes
The maximum continuous recordable time of movies is about 13 hours.
When a movie file exceeds 2 GB, the next movie file is created automatically.
It will take several seconds until you can start recording after you turn on the camcorder. You cannot
operate your camcorder during this time.
The following states will be indicated if data is still being written onto the recording media after recording
has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or
AC Adaptor.
Access lamp (p. 28) is lit or flashing
The media icon in the upper right of the LCD screen is flashing
The camcorder does not have a power zoom function.
Hold the lens with your left hand to support the camera during recording (when you do not use a tripod).
Make sure that your fingers are not touching the microphone.
Tips
See page 97 on the recordable time of movies.
The IRIS, Shutter Speed, Gain and Exposure are set to automatic adjustment when PROGRAM AE is
pressed.
[
SteadyShot] is set to [Standard] in the default setting. Note that if the attached lens does not have an
image stabilizing feature, SteadyShot will not be usable.
You can capture photos from recorded movies (p. 52).
You can check the recordable time, estimated remaining capacity, etc., by touching
[Setup] [
Media Settings)] [Media Info] (p. 82).
(
START/STOP button
(Movie) lamp.
GB
1
[STBY] [REC]
(MENU)
Advertisement
Chapters
Table of Contents
