Sony NEX-3 Function Manual
Hide thumbs
Also See for NEX-3:
- Instruction manual (265 pages) ,
- Handbook (159 pages) ,
- 3d instructions (9 pages)
Advertisement
Quick Links
NEX-3/5/5C/C3
NEX-VG10/VG10E
The new functions provided by this firmware update and their respective
operations are described here.
Please refer to the Instruction Manual of your camera/camcorder and LA-EA2
Mount Adaptor, and the Handbook contained on the supplied CD-ROM.
© 2011 Sony Corporation
4-420-526-12(1)
Advertisement
Related Manuals for Sony NEX-3
Summary of Contents for Sony NEX-3
- Page 1 The new functions provided by this firmware update and their respective operations are described here. Please refer to the Instruction Manual of your camera/camcorder and LA-EA2 Mount Adaptor, and the Handbook contained on the supplied CD-ROM. © 2011 Sony Corporation 4-420-526-12(1)
-
Page 2: New Functions
• You may not be able to use the LA-EA2 Mount Adaptor with certain lenses. You may not use autofocusing with certain lenses attached via the Mount Adaptor. Consult your Sony dealer or local authorized Sony service facility for advice on compatible lenses. - Page 3 • Aperture is set to F3.5 when you record movies with autofocusing. When you are using a lens with an F3.5 or smaller F-stop, aperture is set to the maximum F-stop of the lens. When you want to set your own value for aperture to record movies, select [Aperture Priority] or [Manual Exposure] in [Shoot Mode], and select manual focusing.
-
Page 4: Autofocus Area
Autofocus Area Allows you to set a position for phase-detection AF, when using an A-mount lens with the LA-EA2 Mount Adaptor (sold separately). You can only set the position for phase- detection AF when an A-mount lens with the LA-EA2 Mount Adaptor is attached. 1 [Menu] t [Camera] t [Autofocus Area] t desired mode. - Page 5 Attach a lens of the value to be cleared and select [±0]. If you want to clear all registered values, select [Clear]. • Use [AF Micro Adj.] with Sony, Minolta, and Konika-Minolta lenses only. If you use [AF Micro Adj.] with other brands of lenses, the registered value may be affected.
- Page 6 Peaking Level (NEX-VG10/VG10E only) Enhances the outline of in-focus ranges with a specific color in manual focus. This function allows you to confirm the focus easily. 1 MENU t [Setup] t [Peaking Level] t desired setting. High Sets the peaking level to high. Sets the peaking level to middle.
- Page 7 Peaking Color (NEX-VG10/VG10E only) Sets the color used for the peaking function in manual focus. 1 MENU t [Setup] t [Peaking Color] t desired setting. White Enhances outlines in white. Enhances outlines in red. Yellow Enhances outlines in yellow. Note •...