Related Manuals for Eagle G600AF
Summary of Contents for Eagle G600AF
- Page 1 G600AF, G600AG, G600AH, G600AJ, G600AK, G600AL G600BA, G600BB, G600BC, G600BD, G600BE, G600BF 45M / 90M LED Rope Light Installation Information and Guidance...
- Page 2 IMPORTANT Installers Please Note: This Imformation should be read carefully before installation. CONTENTS Mains Lead Mains Connector In-Line Coupler End Cap Heat shrink 45m Kit 90m Kit 1 x 45m Roll of LED Rope Light 1 x 90m Roll of LED Rope Light 5 x End Caps 10 x End Caps 5 x Inline Couplers...
- Page 3 Operation and Installation Guide 1) The rope light can be cut every 1m at the point marked on the rope light by a pair of scissors or broken line. 2) The cut must be made by a sharp knife and at right angles to the rope. Incorrect cutting of the product can cause the final join to suffer from poor electrical connection which can lead to product failure.
-
Page 4: Maintenance
7) The maximum achievable curve is 75mm. A curve of less than 75mm may stress the PVC sheath lead to product damage and Electrical failure. 8) The product should NOT be mounted using staples, nails or metal fixings which can cause damage to the plastic sheath. Cable ties can be used but must not be over tightened. -
Page 5: Disposal And Recycling
DISPOSAL AND RECYCLING You must not dispose of this item with domestic household waste. PAT TESTING When used in an office environment, we recommend that this product should be safety-tested yearly by a qualified electrician (PAT Tested). We recommend that it is PAT tested regularly when used in a domestic environment. GENERAL SAFETY REQUIREMENTS Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years or at every change of occupancy. -
Page 6: Technical Specification
Do not contact Eagle, only your retailer can arrange a replacement. If your product fails within the guarantee period, firstly read the "fault finding"...