Table of Contents
Advertisement
Next steps
1. Replace the battery.
2. Replace the
base
cover.
3. Replace the
microSD
card.
4. Follow the procedure in
Touchpad button board
Removing the touchpad button board
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the speaker.
6. Remove the
LED
board.
NOTE:
Removal of system board and heatsink are not required to remove the touchpad button board.
Steps
1. Open the latch and disconnect the touchpad button board cable from the connector on the touchpad board.
2. Remove the two (M2x3) screws that secure the touchpad button bracket to the palmrest [1].
3. Lift the touchpad button board bracket away from the computer [2].
60
Disassembly and reassembly
after working inside your
computer.
before working inside your
computer.
Advertisement
Table of Contents
