Table of Contents
Advertisement
Next steps
1. Connect the
battery
cable.
2. Replace the
base
cover.
3. Replace the
microSD
card.
4. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
Steps
1. Remove the single (M2x2) screw that secures the WLAN card bracket to the system board [1].
2. Remove the WLAN card bracket that secures the WLAN antenna cables [2].
3. Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].
4. Slide and lift the WLAN card away from the connector on the system board [4].
32
Disassembly and reassembly
after working inside your
computer.
before working inside your
cable.
computer.
Advertisement
Table of Contents
