Page 2
! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
1. Communication Parameters 2. Pin Assignment 3. Command Table 1. General Function ... 1-2 (a) Mode control ... 1-2 (b) Color matrix ... 1-6 (c) Time control ... 1-7 2. Picture/Sound ... 1-8 (a) Picture/sound ... 1-8 (b) Color temperature ... 1-10 (c) Color temperature name ...
1. Communication Parameters Baud Rate 9600 Character length 8 bits Parity none Stop bit length 1 bit Flow control none 2. Pin Assignment Monitor side : D-sub 9pin (Female) Pin number Function (Straight connection is necessary.) PFM-42X1/42X1N Host side : D-sub 9pin (Male) Pin number Function...
7. Answer (a) Normal message Answer Header 0x70 Normal answer header Category 0xXX Code table (7-a) : Normal code Code table (7-a) Normal code 0x00 Completed Normal response. 0x01 Limit over The packet was received normally, but the data value was over the upper limit.
Page 25
The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.