Advertisement
Quick Links
This adapter kit is designed for in-dash mounting the following products:
Lowrance
X47; Eagle
Measure the reference cross-hair below to con-
firm that this template is printed to the correct
scale. The vertical line and the horizontal line
should each be 2 inches long (50.8 mm.)
After selecting location with sufficient cable
clearance behind unit, tape this page to dash.
Drill jigsaw blade starter hole near template
center. Insert saw and cut along outside line.
Remove backing from one side of mounting
gasket. Orient gasket with the notch up (at top of
unit). Press gasket onto unit. Attach cable.
Remove remaining backing from gasket. Place
unit into cutout and press firmly around entire
outer edge.
Instructions appear here only in abbreviated form. For complete instruc-
tions, see Lowrance manual 988-0105-941 and Eagle manual 988-0143-
631. Manuals are for sale from LEI or can be downloaded free from the
Lowrance and Eagle web sites. See sheet back for addresses.
FM-6
In-Dash Adapter Kit
Installation Notes
Cuda 128, Cuda 168.
ALWAYS VERIFY DIMENSIONS!
Top
Cut along this line
1
Pub. 988-0147-631
Advertisement
Related Manuals for Eagle FM-6
Summary of Contents for Eagle FM-6
- Page 1 Instructions appear here only in abbreviated form. For complete instruc- tions, see Lowrance manual 988-0105-941 and Eagle manual 988-0143- 631. Manuals are for sale from LEI or can be downloaded free from the Lowrance and Eagle web sites. See sheet back for addresses. FM-6 Installation Notes ...
- Page 2 For Eagle: 8 a.m. to 5 p.m. Central Standard Time, M-F Lowrance Electronics and Eagle Electronics may find it necessary to change or end their shipping policies, regulations and special offers at any time. They reserve the right to do so without notice.