D-Link DFE-670 TXD Quick Install Manual
10/100 ethernet pc card for windows 2000
Hide thumbs
Also See for DFE-670 TXD:
- User manual (57 pages) ,
- Installation manual (5 pages) ,
- Specifications (2 pages)
Advertisement
Quick Links
M-DFE-670TXD-NEW.QXD
Please note that you will need Cat5, RJ-45 cable to complete your network
installation. Please see Appendix B for more information regarding cables.
1
Inserting the DFE-670TXD 10/100
Ethernet PC Card into your laptop.
With the laptop turned ON, insert
the DFE-670TXD 10/100 Ethernet PC
Card into your laptop.
Gently insert the front end of the PC
Card (with the yellow arrow on the
card pointing toward the computer) all
the way into the PCMCIA slot on your
laptop, until it is firmly seated.
2
Running the Found New Hardware
Wizard
Windows will automatically load the
Add New Hardware Wizard, which
will lead you through the installation
process.
Click Next.
3/15/2001
11:01 AM
Quick Install Guide
Page 9
for Windows 2000
D F E - 6 7 0 T X D
10/100 Ethernet PC Card
Advertisement
Related Manuals for D-Link DFE-670 TXD
Summary of Contents for D-Link DFE-670 TXD
-
Page 1: Quick Install Guide
Inserting the DFE-670TXD 10/100 Ethernet PC Card into your laptop. With the laptop turned ON, insert the DFE-670TXD 10/100 Ethernet PC Card into your laptop. Gently insert the front end of the PC Card (with the yellow arrow on the... - Page 2 Insert the CD that is included with your purchase of the DFE-670TXD. At this window, select CD-ROM drives Click Next. The Wizard has located the driver. Click Next Windows has finished installing the DFE-670TXD. Click Finish, to complete the installation. 11:01 AM Page 10...
-
Page 3: Connecting To Your Network
RJ-45 cable into your networking hub or switch. You are now networked! Please see Appendix A to check for proper installation of your DFE-670TXD using the Device Manager. Please see Appendix B for more information on types and lengths of cable that can be used to connect your network. - Page 4 568 100-ohm STP cable, all qualify under traditional Ethernet cabling rules. The maximum cable run between the DFE-670TXD and the supporting hub is 300 ft. The cable must be straight (not a crossover cable) with an RJ-45 plug at each end.